Skip to main content
Software und Anwendung für AutoCAD Plant 3D · Autodesk Authorized Training Center · Frankfurt am Main Deutsch · Español · +49 69 9450725-0 · vertrieb@seitz-ingenieure.de

Products · Project templates

ASEING PlantConfig Pro

Ready-made project templates for AutoCAD P&IDR&I – Piping and instrumentation diagram Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram). Background and sources › and Plant 3D: numbering, tags, annotation, title block, piping specs, isometrics and reports – from more than 20 years of plant engineering practice.

4identification systems
15Report Creator reports
8tool palettes
1 clickinstallation

The task

A Plant 3D and P&ID project that works to your standard from day one.

What you want

  • You want to be ready to go with symbols, tags, layouts and pipe specs.
  • You want every project set up equally well – whoever creates it.
  • You want to design on day one instead of after up to 5 weeks of setup.

Our solution

  • Ready templates: KKSKKS – Power plant identification system Identification of plants, systems, equipment units and components in power plants according to guideline VGB-S-811-01. Background and sources ›, AKSAKS – Plant identification system (AKS) Scheme by which an owner or operator gives every plant, component and room a unique name, often for building services. Each operator defines its own AKS. Background and sources ›, RDS-PPRDS-PP – Reference Designation System for Power Plants Identification system for power plants based on the international standard series ISO/IEC 81346; successor to KKS. Background and sources › or ISO 10628DIN EN ISO 10628 – Diagrams for the chemical and petrochemical industry Part 1 specifies the kinds of flow diagrams (block, process, P&I diagram) and what each shows; part 2 the graphical symbols. Basis of the symbol library in AutoCAD P&ID. Background and sources ›, title block, pipe specs, 15 reports.
  • Ready to use; title block and logo layout adaptation included, further setup bookable as a service.
  • Adapted to your numbering and revision rules.

Your advantage

  • Start the project right away instead of weeks later.
  • Consistent deliverables to your company standard.
  • An installer instead of manual work.
  • Your standard lives in the system.

Source: ASEING project time records 2020–2026 (~35 pipe spec/configuration projects); experience A. Seitz

The default configuration is not a project start

Typical without a template

  • Missing symbols and tag definitions
  • Gaps between P&ID and 3D
  • No check options and layout templates
  • Missing or unsuitable piping specs

With PlantConfig Pro

  • Create a template project and start working
  • Same tag structure in P&ID and 3D incl. mapping
  • Title block to EN ISO 7200DIN EN ISO 7200 – Technical product documentation – Data fields in title blocks and document headers Specifies the data fields of the title block, including seven mandatory fields such as identification number, title, creator and date of issue. Width 180 mm, position bottom right. Background and sources › with revisions
  • Sample piping specs with weights and order texts

What changes for you

Starting point: Every project starts differently: different tags, a different title block, its own lists.
Effort

Without support

  • Set up the project template yourself: tag formats, annotations, title block, lists and layers.
  • For comparison: comparable setups to a company standard recently took us around 7–10 hours (2025/2026).

Effort

With us

  • Ready-made project template for AutoCAD P&ID and AutoCAD Plant 3D: numbering to KKS, AKS, RDS-PP or ISO 10628, title block, piping specs and 15 reports.
  • Adaptation to your company standard as a service, billed by effort.

Risks

What you avoid

  • Tags that are not consistent – then lists and the comparison between P&ID and 3D model do not match.

Result

What you get

  • Every project starts with the same standard.

Figures from our project records and support evaluation, without customer names. As of 7 Nov 2026.

What's inside

Numbering systems

ISO 10628, AKS, KKS or RDS-PP – level system, fields as text or selection list.

Tags & transfer rules

Tag definitions with separators, transfer rules, tag updater.

Annotation

KKS line flag, annotation with frame, presets.

Title block EN ISO 7200

Field definitions, revisions as symbols with revision rows.

Symbol palettes

Equipment, machinery, I&C, inline objects, valves, lines by fluid.

Piping specs

Enameled steel, DIN 2873DIN 2873 – Flanged steel pipes and flanged steel fittings, glass lined – PN 10 and PN 25 Dimensional standard for glass-lined flanged steel pipes and flanged fittings – tees, crosses, reducers, spacers – in PN 10 and PN 25. The ASEING catalogs of the EMA group (enamel) are based on it. Background and sources › – with weights and order texts, sheet layout based on DIN 21057DIN 21057 – Piping specs for process plants Series of standards for structuring piping specs: part 1 fundamentals and naming, further parts per material. It is the successor of PAS 1057; ASEING piping specs are based on it. Background and sources ›.

Isometric & ortho

Iso styles Check, Final, Spool, Stress in A1A0 … A4 – Paper sizes Paper sizes according to DIN EN ISO 216: A4 = 210 × 297 mm. Each smaller number doubles the area (A3 = 297 × 420 mm, A0 = about 1 m²). Background and sources ›–A3; ortho templates.

Reports & checks

15 Report Creator reports plus P&ID ↔ 3D project reports.

Your identification system – already set up

More about the systems in the Plant Engineering Infobase.

KKS structure
Power plant

KKS

Power plant identification system, AKZ-compatibleAKZ – Plant identifier (AKZ) Identifier of a component according to a plant identification system (AKS) or KKS, in AutoCAD P&ID e.g. in the “Tag” field. Background and sources › – e.g. 0330 10LAD60AC001.

Plant engineering

AKS

Numbering by plant area; also shows how to convert existing projects.

Power plant

RDS-PP

Reference designation for power plants via freely configurable levels.

Process engineering

ISO 10628

Lean basis for flow diagrams in chemicals, pharma and industry.

What it looks like in the project

Title block & revisions
Title block & revisions – to EN ISO 7200 with your logo
Symbol palettes
Symbol palettes – equipment, valves, I&C
Material list with weights
Material list with weights – directly from Report Creator
Piping specs
Piping specs – with weights and order texts
P&ID ↔ 3D
P&ID ↔ 3D – comparison and transfer
KKS annotation
KKS annotation – line flag with frame

Prices

Company license for all Plant 3D workstations in the company – the price depends on the number of users. Access for 12 months incl. new versions – you may keep using downloaded files afterwards.

Software package PlantConfig Pro + PlantPlus – cheaper as a package

Also includes ASEING PlantPlus – around 100 additional commands for Plant 3D.

Plant 3D usersindividuallyin a bundle
up to 3 peopleprice after loginprice after login
4–10 peopleprice after loginprice after login
11 people and moreprice after loginprice after login
Order the package Quote More about ASEING PlantPlus

Delivery: installation package with installer and automatic path adjustment. Included: title block and logo layout adaptation. Service on top: further setup, adaptation to your numbering and onboarding – by effort via support (Teams). Single template (one engineering configuration or topic template): on request. Matching: piping spec catalogs and training at the Autodesk Authorized Training Center.

Frequently asked questions

What is included in PlantConfig Pro?

All templates: AKZ master template, all engineering configurations and topic templates, tool palettes, DWTDWT – Drawing template AutoCAD template file (drawing template): new drawings take their layers, styles and settings from it. Background and sources › templates, 15 Report Creator reports, installation aid and customization of title block and logo.

Which identification systems are set up?

Power plant identification system KKS, plant identification AKS, RDS-PP and ISO 10628 – each with tags, transfer rules and annotation.

Can we use our own title block?

Yes. Layout customization of the title block and logo is included in PlantConfig Pro; the title block follows EN ISO 7200 with revision rows.

Are individual templates available?

Yes – one engineering configuration (Basic, AKS, KKS, RDS-PP) or a topic template such as Valves & Equipment or Title Block, on request.

How do we learn to work with the template?

In our training courses AutoCAD P&ID Setup and Plant 3D Administration – or directly in the P&ID Configuration video course.

Free CAD check45 min via remote session
Standards status for this page 6 standards · researched October 2026
StandardContentsCurrent editionReplaced / successor
DIN EN ISO 10628-1Diagrams for the chemical and petrochemical industry – Part 1: Specification of diagramsDIN EN ISO 10628-1:2015-04replaces DIN EN ISO 10628:2001-03
DIN EN ISO 10628-2Diagrams for the chemical and petrochemical industry – Part 2: Graphical symbolsDIN EN ISO 10628-2:2013-04replaces DIN EN ISO 10628:2001-03
DIN EN ISO 7200Technical product documentation – Data fields in title blocks and document headersDIN EN ISO 7200:2004-05replaces DIN 6771-1:1970-12DIN 6771 – Title blocks for drawings, plans and lists (old) Former standard for title blocks, withdrawn and replaced by DIN EN ISO 7200. Many company title blocks are still based on it. Background and sources ›
DIN 2873Enameled steel flanged pipes and fittings – PN 10PN – Nominal pressure rating Designation for the pressure rating of flanges and valves (Pressure Nominal), e.g. PN 16. It corresponds roughly to the allowable pressure in bar at room temperature; at higher temperatures, less is allowed. Background and sources › and PN 25DIN 2873:2002-06replaces DIN 2873:1993-11
DIN 21057Piping specsDIN 21057-1:2023-08; Parts 5/6:2016-12; Parts 10–12:2026-04/-05replaces PAS 1057; DIN 21057-1:2016-12; DIN 21057-10 to -12:2017-04
DIN 2403DIN 2403 – Identification of pipelines according to fluid conveyed DIN 2403 specifies how above-ground pipelines are marked according to the fluid they carry. Each fluid belongs to a group 0 to 9 with its own group colour; flammable and non-flammable gases, liquids and solids also carry an additional colour. “Gr.” with a number names the group, e.g. Gr. 1 = water, green. Background and sources ›Identification of pipelines according to fluid conveyedDIN 2403:2025-12replaces DIN 2403:2018-10

Researched at DIN Media, ISOISO – International Organization for Standardization International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards). Background and sources ›, IECIEC – International Electrotechnical Commission International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control. Background and sources › and ASMEASME – American Society of Mechanical Engineers US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide. Background and sources ›, as of October 2026. Before binding use, please check the current edition with the standards publisher. Overview of all standards: Plant Engineering Infobase · Standards status.

Terms, background and sources 17 terms on this page

Brief explanations for reference. They do not replace the standard or code itself.

R&I – Piping and instrumentation diagram

Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram).

Symbols and drawing rules: DIN EN ISO 10628-1 and -2. Identification letters for instrumentation: DIN EN 62424 or ISA-5.1.

KKS – Power plant identification system

Identification of plants, systems, equipment units and components in power plants according to guideline VGB-S-811-01.

A KKS code is structured from coarse to fine: overall plant, system, equipment unit, component. Its successor is RDS-PP according to ISO/IEC 81346.

AKS – Plant identification system (AKS)

Scheme by which an owner or operator gives every plant, component and room a unique name, often for building services. Each operator defines its own AKS.

RDS-PP – Reference Designation System for Power Plants

Identification system for power plants based on the international standard series ISO/IEC 81346; successor to KKS.

DIN EN ISO 10628 – Diagrams for the chemical and petrochemical industry

Part 1 specifies the kinds of flow diagrams (block, process, P&I diagram) and what each shows; part 2 the graphical symbols. Basis of the symbol library in AutoCAD P&ID.

DIN EN ISO 7200 – Technical product documentation – Data fields in title blocks and document headers

Specifies the data fields of the title block, including seven mandatory fields such as identification number, title, creator and date of issue. Width 180 mm, position bottom right.

DIN 2873 – Flanged steel pipes and flanged steel fittings, glass lined – PN 10 and PN 25

Dimensional standard for glass-lined flanged steel pipes and flanged fittings – tees, crosses, reducers, spacers – in PN 10 and PN 25. The ASEING catalogs of the EMA group (enamel) are based on it.

DIN 21057 – Piping specs for process plants

Series of standards for structuring piping specs: part 1 fundamentals and naming, further parts per material. It is the successor of PAS 1057; ASEING piping specs are based on it.

A0 … A4 – Paper sizes

Paper sizes according to DIN EN ISO 216: A4 = 210 × 297 mm. Each smaller number doubles the area (A3 = 297 × 420 mm, A0 = about 1 m²).

AKZ – Plant identifier (AKZ)

Identifier of a component according to a plant identification system (AKS) or KKS, in AutoCAD P&ID e.g. in the “Tag” field.

DWT – Drawing template

AutoCAD template file (drawing template): new drawings take their layers, styles and settings from it.

DIN 6771 – Title blocks for drawings, plans and lists (old)

Former standard for title blocks, withdrawn and replaced by DIN EN ISO 7200. Many company title blocks are still based on it.

PN – Nominal pressure rating

Designation for the pressure rating of flanges and valves (Pressure Nominal), e.g. PN 16. It corresponds roughly to the allowable pressure in bar at room temperature; at higher temperatures, less is allowed.

Specified in DIN EN 1333. The pressure-temperature ratings for each material are given in the component standards, e.g. DIN EN 1092-1 for steel flanges.

DIN 2403 – Identification of pipelines according to fluid conveyed

DIN 2403 specifies how above-ground pipelines are marked according to the fluid they carry. Each fluid belongs to a group 0 to 9 with its own group colour; flammable and non-flammable gases, liquids and solids also carry an additional colour. “Gr.” with a number names the group, e.g. Gr. 1 = water, green.

Groups and colours: 1 water – green · 2 steam – red · 3 air – grey · 4 flammable gases – yellow, additional colour red · 5 non-flammable gases – yellow, additional colour black · 6 acids – orange · 7 alkalis – violet · 8 flammable liquids and solids – brown, additional colour red · 9 non-flammable liquids and solids – brown, additional colour black · 0 oxygen – blue (as reproduced in TRGS 201 Annex 3, Table 2).
In the Piping Spec Calculator the groups order the selection of fluids. “Exhaust air and flue gas” is listed under 3/5; food and pharma and “other” have no group. The group does not determine material or pressure rating – it applies to marking the finished line.
Current edition according to DIN Media: DIN 2403:2025-12 (replaces DIN 2403:2018-10). Not covered are pipelines on ships and marine installations, ventilation systems in non-residential buildings and medical gas pipelines.

ISO – International Organization for Standardization

International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards).

ISO was founded in 1947. Its members are the national standards bodies; for Germany, this is DIN.

IEC – International Electrotechnical Commission

International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control.

IEC was founded in 1906. IEC standards adopted in Europe are called “EN IEC …” or “EN 6xxxx”.

ASME – American Society of Mechanical Engineers

US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide.

ASME was founded in 1880. Well-known codes: B31.3 (process piping), B16.5 (flanges), B36.10M and B36.19M (pipe dimensions).

Sources and origins