Free · Knowledge
Plant Engineering Infobase
Standards, flow diagrams, identification systems, disciplines, CADCAD – Computer-Aided Design Computer-aided design and drafting. Background and sources › practice and as-built capture – explained concisely, with sources and direct links to calculators, templates and training.
The task
Plant design know-how – compact and with sources.
What you want
- You want to find knowledge from standards, catalogs and practice in one place.
- You want to find answers quickly and keep designing.
Our solution
- Standards, flow diagrams, tagging, trades, CAD practice, as-built capture – explained compactly.
- Direct links to calculators, templates and training.
Your advantage
- Answers found faster.
- Well founded in discussion with client companies.
- Freely accessible.
- With sources to read up.
Chapter overview
Each chapter is a separate page. Switch between chapters at any time at the top. The Infobase explains the basics – the current edition of the relevant standard always applies.
Process engineering
Process engineering deliberately changes the properties of substances, such as composition, form or state. This takes place in equipment and …
Flow diagrams
Flow diagrams represent a process schematically. Three types are distinguished by level of abstraction. The governing standards are DIN EN ISO 10628-1:2015 …
- Symbol systems compared
Plant identification
Identification systems give every component of a plant a unique, machine-readable designation. In CAD they are handled via property fields …
- Reference designation according to DIN EN IEC 81346
- KKS – power plant classification system
- AKS – plant identification for buildings
- Identification letters for equipment, valves and piping
Process control engineering
PCE loops (formerly EMSR loops) are represented in the P&ID according to DIN EN 62424:2017-12. It replaces the withdrawn DIN 19227-1. The …
- Open-loop and closed-loop control
- Structure of a PCE loop
- Identification letters according to DIN EN 62424
Documentation
Plant documentation is part of project management, like quality management and project controlling. Well structured, it reduces operating …
- Structure and identification of documents
- Data sheets
- Bills of materials
- Delivery times
Disciplines
A plant is created through the interaction of several disciplines. For CAD design, interfaces, space requirements and freedom from clashes matter most.
- Apparatus engineering and pressure equipment
Piping
The basic standard for metallic industrial piping is the DIN EN 13480 series (2024-12 edition). Piping specs are structured according to DIN 21057, the …
- Outside diameters and wall thicknesses
- Support spans
- Component data for building catalogs
- Valves
Piping specs
A piping spec defines which components are permitted for a line. This makes it possible to comply consistently with process requirements, …
- Naming
- Materials
- Facings and connection types
- Gaskets
Drawings and drawing standards
General views, layout drawings and piping isometrics are derived from the 3D model. Border, title block and lines follow the standards …
- Title block according to DIN EN ISO 7200
- Line types according to DIN EN ISO 128-2
Revision management
The revision status identifies a specific revision of a document. With each revision it receives a new index (letter or …
Designing with CAD
Goals: avoid design errors, follow review and approval procedures, request and implement requirements, create as few revisions as possible.
- Project stakeholders and escalation
- Checklists
Project Setup in AutoCAD Plant 3D
The goal is a template project with usable layouts, a plant identification system (here KKS) in tag assignment, automatic annotation and …
- Project data
- Fields, tags and annotation
- Comparing P&ID and Plant 3D
- Lines, symbols, catalogs
As-built capture with laser scanning
Revamps and extensions of existing plants are planned most reliably on an up-to-date survey. A 3D laser scanner captures in a few minutes …
- Workflow
- Processes and equipment
- Planning a scan project
- Rules for scanning
Standards status
Research status October 2026. The most recently determined edition is given. Check the current edition with the standards publisher …
- Standards compass: which rule for what – with reference to AutoCAD Plant 3D
- Applicable codes and standards
- Withdrawn standards and their successors
- Sources
Calculation basis of the online calculators
This chapter discloses how the ASEING online calculators work: calculation method step by step, stored defaults and guide values, limits and …
- Principles for all calculators
- Pipe sizing and pressure drop
- Thermal expansion, expansion joint and flexible leg
- Pipe weight and support load
Fluids, materials and joints
Every pipeline starts with the fluid. Its properties – hazard to people and the environment, corrosion, pressure and temperature, purity – …
- Classifying fluids: hazard classes, fluid groups and fluid categories
- From fluid to material – why there are so many piping materials
- Piping materials at a glance
- Types of joints – and why there are so many
Questions from practice in training and support
671 anonymized questions with answers on P&ID, Plant 3D, piping specs, AutoCAD, Navisworks and ReCap – searchable.
- P&ID and Project Setup
- Piping specs and catalogs
- AutoCAD basics
- Navisworks and ReCap

Before you go …
Don't miss any training dates, C³ invitations and news on AutoCAD Plant 3D and P&IDR&I – Piping and instrumentation diagram Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram). Background and sources ›.
Our newsletter only arrives when there's something important – concise and with tips from practice.
Standards status for this page 8 standards · researched October 2026
| Standard | Contents | Current edition | Replaced / successor |
|---|---|---|---|
| DIN EN ISO 10628-1DIN EN ISO 10628 – Diagrams for the chemical and petrochemical industry Part 1 specifies the kinds of flow diagrams (block, process, P&I diagram) and what each shows; part 2 the graphical symbols. Basis of the symbol library in AutoCAD P&ID. Background and sources › | Diagrams for the chemical and petrochemical industry – Part 1: Specification of diagrams | DIN EN ISO 10628-1:2015-04 | replaces DIN EN ISO 10628:2001-03 |
| DIN EN IEC 81346-1DIN EN IEC 81346 – Industrial systems – Structuring principles and reference designations The cross-industry basis of plant designation: each object under three aspects – function (=), product (-) and location (+). Part 2 contains the code letters, ISO/TS 81346-10 the version for power plants (RDS-PP). Background and sources › | Structuring principles and reference designations – Part 1: Basic rules | DIN EN IEC 81346-1:2024-07 | replaces DIN EN 81346-1:2010-05 |
| DIN EN IEC 81346-2 | Structuring principles and reference designation – Part 2: Classification of objects and codes for classes | DIN EN IEC 81346-2:2020-10 | replaces DIN EN 81346-2:2010-05 |
| DIN EN 62424 (VDE 0810-24)DIN EN 62424 – Representation of process control engineering requests in P&I diagrams Specifies how instrumentation points are represented in the P&ID and designated with code letters (e.g. TIC = temperature, indication, control). It replaces DIN 19227-1; VDE classification VDE 0810-24. Background and sources › | Representation of process control engineering requests in P&I diagrams and data exchange between P&ID tools | DIN EN 62424 (VDE 0810-24VDE 0810 – VDE classification of process control standards Number under which a standard also applies as a VDE regulation: VDE 0810-24 is DIN EN 62424 (instrumentation in the flow diagram), VDE 0810-1 is DIN EN 61511-1 (functional safety). Background and sources ›):2017-12 | replaces DIN EN 62424 (VDE 0810-24):2010-01 |
| DIN EN 13480DIN EN 13480 – Metallic industrial piping The European standard for metallic industrial piping: part 2 materials, part 3 design and calculation, part 4 fabrication, part 5 inspection and testing. The Piping Spec Calculator sizes wall thicknesses according to part 3 – as a preliminary sizing, not a piping design. Background and sources › | Metallic industrial piping | DIN EN 13480-1 to -6 and -8:2024-12; Part 7 as DIN CEN/TR 13480-7:2022-08 | replaces the 2017-12 editions with amendments A1 ff. |
| DIN 21057DIN 21057 – Piping specs for process plants Series of standards for structuring piping specs: part 1 fundamentals and naming, further parts per material. It is the successor of PAS 1057; ASEING piping specs are based on it. Background and sources › | Piping specs | DIN 21057-1:2023-08; Parts 5/6:2016-12; Parts 10–12:2026-04/-05 | replaces PAS 1057; DIN 21057-1:2016-12; DIN 21057-10 to -12:2017-04 |
| DIN EN ISO 7200DIN EN ISO 7200 – Technical product documentation – Data fields in title blocks and document headers Specifies the data fields of the title block, including seven mandatory fields such as identification number, title, creator and date of issue. Width 180 mm, position bottom right. Background and sources › | Technical product documentation – Data fields in title blocks and document headers | DIN EN ISO 7200:2004-05 | replaces DIN 6771-1:1970-12DIN 6771 – Title blocks for drawings, plans and lists (old) Former standard for title blocks, withdrawn and replaced by DIN EN ISO 7200. Many company title blocks are still based on it. Background and sources › |
| DIN EN ISO 128-2DIN EN ISO 128 – Technical product documentation – General principles of representation Series of standards for representation in drawings; part 2 covers the line types (continuous, dashed, dash-dot line) and replaces DIN ISO 128-24. Background and sources › | Technical product documentation – General principles of representation – Part 2: Basic conventions for lines | DIN EN ISO 128-2:2023-06 | replaces DIN EN ISO 128-2:2022-02 |
Researched at DIN Media, ISOISO – International Organization for Standardization International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards). Background and sources ›, IECIEC – International Electrotechnical Commission International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control. Background and sources › and ASMEASME – American Society of Mechanical Engineers US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide. Background and sources ›, as of October 2026. Before binding use, please check the current edition with the standards publisher. Overview of all standards: Plant Engineering Infobase · Standards status.
Technically responsible: A. Seitz, Managing Director of A. Seitz Ingenieur GmbH (plant design, AutoCAD Plant 3D).
Terms, background and sources 17 terms on this page
Brief explanations for reference. They do not replace the standard or code itself.
- CAD – Computer-Aided Design
Computer-aided design and drafting.
- KKS – Power plant identification system
Identification of plants, systems, equipment units and components in power plants according to guideline VGB-S-811-01.
A KKS code is structured from coarse to fine: overall plant, system, equipment unit, component. Its successor is RDS-PP according to ISO/IEC 81346.
- AKS – Plant identification system (AKS)
Scheme by which an owner or operator gives every plant, component and room a unique name, often for building services. Each operator defines its own AKS.
- RDS-PP – Reference Designation System for Power Plants
Identification system for power plants based on the international standard series ISO/IEC 81346; successor to KKS.
- R&I – Piping and instrumentation diagram
Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram).
Symbols and drawing rules: DIN EN ISO 10628-1 and -2. Identification letters for instrumentation: DIN EN 62424 or ISA-5.1.
- DIN EN ISO 10628 – Diagrams for the chemical and petrochemical industry
Part 1 specifies the kinds of flow diagrams (block, process, P&I diagram) and what each shows; part 2 the graphical symbols. Basis of the symbol library in AutoCAD P&ID.
- DIN EN IEC 81346 – Industrial systems – Structuring principles and reference designations
The cross-industry basis of plant designation: each object under three aspects – function (=), product (-) and location (+). Part 2 contains the code letters, ISO/TS 81346-10 the version for power plants (RDS-PP).
- DIN EN 62424 – Representation of process control engineering requests in P&I diagrams
Specifies how instrumentation points are represented in the P&ID and designated with code letters (e.g. TIC = temperature, indication, control). It replaces DIN 19227-1; VDE classification VDE 0810-24.
- VDE 0810 – VDE classification of process control standards
Number under which a standard also applies as a VDE regulation: VDE 0810-24 is DIN EN 62424 (instrumentation in the flow diagram), VDE 0810-1 is DIN EN 61511-1 (functional safety).
- DIN EN 13480 – Metallic industrial piping
The European standard for metallic industrial piping: part 2 materials, part 3 design and calculation, part 4 fabrication, part 5 inspection and testing. The Piping Spec Calculator sizes wall thicknesses according to part 3 – as a preliminary sizing, not a piping design.
Current parts 1 to 6 and 8 in the 2024-12 edition; part 7 (conformity assessment) is a technical report, DIN CEN/TR 13480-7.
- DIN 21057 – Piping specs for process plants
Series of standards for structuring piping specs: part 1 fundamentals and naming, further parts per material. It is the successor of PAS 1057; ASEING piping specs are based on it.
- DIN EN ISO 7200 – Technical product documentation – Data fields in title blocks and document headers
Specifies the data fields of the title block, including seven mandatory fields such as identification number, title, creator and date of issue. Width 180 mm, position bottom right.
- DIN 6771 – Title blocks for drawings, plans and lists (old)
Former standard for title blocks, withdrawn and replaced by DIN EN ISO 7200. Many company title blocks are still based on it.
- DIN EN ISO 128 – Technical product documentation – General principles of representation
Series of standards for representation in drawings; part 2 covers the line types (continuous, dashed, dash-dot line) and replaces DIN ISO 128-24.
- ISO – International Organization for Standardization
International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards).
ISO was founded in 1947. Its members are the national standards bodies; for Germany, this is DIN.
- IEC – International Electrotechnical Commission
International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control.
IEC was founded in 1906. IEC standards adopted in Europe are called “EN IEC …” or “EN 6xxxx”.
- ASME – American Society of Mechanical Engineers
US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide.
ASME was founded in 1880. Well-known codes: B31.3 (process piping), B16.5 (flanges), B36.10M and B36.19M (pipe dimensions).
Sources and origins
- Wikipedia – Computer-aided design (for CAD)
- vgbe energy (formerly VGB PowerTech) (for KKS, RDS-PP)
- ASEING Plant Engineering Infobase (for AKS)
- IEC – International Electrotechnical Commission (for RDS-PP, R&I, IEC)
- ISO – International Organization for Standardization (for R&I, ISO)
- DIN Media: DIN EN ISO 10628-1:2015-04 (for DIN EN ISO 10628)
- DIN Media: DIN EN IEC 81346-1:2024-07 (for DIN EN IEC 81346)
- DIN Media: DIN EN 62424:2017-12 (for DIN EN 62424)
- DIN Media: DIN EN 62424 (VDE 0810-24) (for VDE 0810)
- DIN Media: DIN EN 13480-1:2024-12 (for DIN EN 13480)
- DIN Media: DIN 21057-1:2023-08 (for DIN 21057)
- DIN Media: DIN EN ISO 7200:2004-05 (for DIN EN ISO 7200)
- DIN Media: DIN 6771-1 (withdrawn) (for DIN 6771)
- DIN Media: DIN EN ISO 128-2:2023-06 (for DIN EN ISO 128)
- ASME – American Society of Mechanical Engineers (for ASME)