Download Center · Piping catalogs
ASEING Piping Catalogs for AutoCAD Plant 3D
Buy Plant 3D catalogs (content) to EN/DINEN – European Standard European Standard, developed by CEN (general) or CENELEC (electrical engineering). Background and sources ›DIN – German Institute for Standardization German Institute for Standardization in Berlin: it publishes the German standards (DIN standards) and represents Germany in CEN and ISO. Background and sources ›: 52 checked piping spec catalogs with weights and order texts – individually, as a package or complete. For steel, stainless steel, enamel, plastic, ventilation, valves and instruments, also with manufacturer valves and as a book bundle.
The task
Checked catalogs as the basis of your pipe specs.
What you want
- You want complete catalogs with weights and order texts.
- You want to rely on the BOMBOM – Bill of Materials Bill of Materials – parts or material list. In AutoCAD Plant 3D the BOM-ATTRIBUTES section of Iso.atr defines the component properties on the isometric. Background and sources › and purchasing.
- You want to build catalogs once and use them in every project.
Our solution
- 52 checked catalogs: steel, stainless, enamel, plastics, ventilation, valves, instruments.
- With weights, order texts and manufacturer valves.
- Catalog search: which catalog has the part?
Your advantage
- Ready to use instead of building your own.
- Clean BOMs from the first project.
- Single, as a bundle or as a complete package.
- The same check rules as the catalog checker.
10 groups – from steel pipe to cable tray
Separated by geometry type, base components derived per material – lean, traceable piping specs.
Carbon steel – pipes & fittings
Stainless steel – pipes & fittings
Copper – pipes & fittings
Enamel / DIN 2873
Plastic – pipes & fittings
Ventilation, flue gas & modular systems
Valves (DIN EN)
Manufacturer valves & expansion joints (3D blocks)
Instruments (I&C)
Script-based catalogs – only in the book bundle
What changes for you
Without support
- Build catalogs yourself: enter dimensions, weights and order texts for each part family, assign iso symbols and test in the project.
- For comparison: our own configuration and piping spec projects since 2020 mostly took 3–20 hours, with a median of 10.5 hours.
With us
- 52 checked ASEING piping catalogs as the basis for your piping specs.
- Piping spec from checked catalogs: 0.1 catalog credit per part family – a spec with 19 families is 1.9 credits.
- Preliminary sizing of wall thicknesses with the Piping Spec Calculator (preliminary sizing, not a piping design).
What you avoid
- Wrong dimensions or weights in the bill of materials and isometric.
- Parts with a missing or wrong iso symbol that interrupt the isometric.
What you get
- Piping specs that work in the AutoCAD Plant 3D project.
- We check our catalogs with the same rules as the Catalog Checker.
Figures from our project records and support evaluation, without customer names. As of 7 Nov 2026.
Catalog list
Search by component, standard, material, manufacturer or nominal size – the search covers all component families of all catalogs. Save items – your selection is sent to our sales team as an enquiry. Script-based catalogs are only available in the book bundle.
Verified data for your design






Prices
Net plus VAT, license by headcount (S up to 3 people · M 4–10 ×1.5 · L 11+ ×2). 12 months' access incl. new versions – you may keep using downloaded files afterwards – for single catalogs, catalog packages, bundles and the complete package. Single catalog: S up to 50 families price after login · M 51–150 families price after login · L 151–300 families price after login.
All-in-one: everything ASEING offers for download – 12 months
- All 52 piping catalogs for Plant 3D – for your whole company
- Online manuals & video courses: all online manuals with video courses and course manuals
- All technical books including book bundles with script catalogs
- ASEING PlantConfig Pro (project templates) and ASEING PlantPlus (about 100 commands) as company license
- everything as a company license, price tier by number of Plant 3D users as for the software, new versions included
Packages already purchased are fully credited when you switch within the term. Not included: setup and support (billed by effort), catalog credits for the tools.
net plus VAT · 12 months · savings over the individual packages in every tier
Complete package piping catalogs
All 52 catalogs incl. book bundles and installation help (remote) – for your whole company, new catalogs included.
Catalog package metal piping
11 catalogs, 1.246 part families – carbon steel, stainless steel, copper, enamel – pipes, fittings, flanges, gaskets.
Catalog package plastic piping
9 catalogs, 905 part families – PE, PP, PVC, PVDF, GRP – pipes, fittings and plastic valves.
Catalog package valves & instrumentation
19 catalogs, 1,282 part families – valves DIN EN, manufacturer valves and expansion joints, instruments.
Catalog package ventilation & flue gas
4 catalogs, 199 part families – flue gas V4A, ventilation steel/stainless steel, clamp ring system.
Individual catalog
Price by number of part families: S up to 50 families price after login · M 51–150 families price after login · L 151–300 families price after login.
Special piping specs
The Piping Spec Calculator generates standard specs as Plant 3D catalogs. We create specs with manufacturer blocks, custom scripts and valves – with release management.
All prices are company licenses for up to 3 people working with Plant 3D in your company (tier S). For 4–10 people 1.5 times the price applies (M), from 11 people double (L) – the cart calculates the tier.
Book bundles
Script-based catalogs are best used with the matching background knowledge. That is why they come in a bundle with the technical book – including ready-made Python scripts and catalogs as well as a ready-made piping spec. 1 year download access incl. new versions.
Complete Bundle Scripting
All 4 book bundles in one package: the technical books Python Scripting, Threaded Fittings, Cable Trays, Support Concepts with scripts or appendix and all 9 script catalogs (SKR-01–SKR-09) with a ready-made pipe class. Language: German.
Python Scripting bundle
Scripts for catalog components, equipment script format, nozzle catalog, pipe supports, development environment. With all sample scripts from the book as a script collection. All 4 bundles with all 9 script catalogs: Complete Bundle Scripting price after login .
Compression Fittings bundle
Python catalogs for compression fittings, valves, supports and accessories. Catalogs: Conexa cutting ring fittings, Parker Ermeto EO fittings, Swagelok compression fittings, GF malleable iron fittings. All 4 bundles with all 9 script catalogs: Complete Bundle Scripting price after login .
Cable Trays bundle
Cable trays and cable ducts as Python catalogs. Catalogs: cable duct basic, Pflitsch KD cable duct, Pflitsch PIK cable duct. All 4 bundles with all 9 script catalogs: Complete Bundle Scripting price after login .
Support Concepts bundle
Designing and modeling supports: Python standard supports, pipe clamps DIN 3015, sikla pipe supports, fixed points and reports. Catalogs: pipe clamps DIN 3015, sikla pipe supports. All 4 bundles with all 9 script catalogs: Complete Bundle Scripting price after login .
View book: Plant 3D – Python Scripting View book: Plant 3D – Compression Fittings View book: Plant 3D – Cable Trays View book: Plant 3D – Support Concepts
Check, extend and create your own catalogs
For catalogs you maintain yourself or purchase – and for piping specs from the Piping Spec Calculator.
Check & correct a catalog
Check your own or purchased catalogs (.pcat as ZIP): dimensions, weights, texts, standards, iso symbols, blocks, scripts – download a corrected copy.
Add components & Excel for the Catalog Builder
Add missing nominal sizes and families: 0.1 catalog credit (price after login, depending on package) per added family. Export the entire catalog as Excel (ExcelFormatVersion 2.0) for the Autodesk Catalog Builder – included in the check.
Catalog from manufacturer data
Upload a manufacturer PDF, Excel or CSV: the ASEING Catalog Builder reads the dimension tables, recognizes type, connection, material, standards, pressure and temperature, and writes pipe components, valves and supports as a Catalog Builder Excel file. 0.1 catalog credit (price after login, depending on package) per family.
Piping spec as a Plant 3D catalog
Perform preliminary sizing of a piping spec in the calculator and download the entire spec – pipes, fittings, flanges, gaskets, bolts and valves with actuators, including DIN 11850 dairy pipe with union or clamp – as a Catalog Builder Excel file. 0.1 catalog credit (price after login, depending on package) per family.
Connection Assistant
Custom end types in your catalog? Import EndCodesConfig.xml and DefaultConnectorsConfig.xml, check them and extend them as needed – free of charge.
Documents
One-pager
Program, features and prices on one page.
Catalog overview
All 52 catalogs with standards, pressure ratings and nominal sizes.
Catalog overview
The same list, filterable for purchasing and IT.
Piping Spec Calculator
Preliminary sizing of a spec, see matching catalogs – or create the spec as a Plant 3D catalog (0.1 credit per family).
Catalog implementation quick reference
Check, import and test new catalogs: content path, end types, connection settings, spec and test placement.
Piping spec definition quick reference
Describe piping specs completely – pipes, elbows, tees, flanges, valves.
Structural catalog with weights
Both structural catalogs supplied with AutoCAD Plant 3D with weight per meter: 12,635 profile sizes. Plant 3D calculates the weight of each member itself – for quantities and weights, not for structural analysis.
Catalog Checker
Check your own or purchased catalogs: dimensions, weights, order texts, standards, iso symbols, blocks – with suggested corrections.
Frequently asked questions
What does a piping catalog contain?
One installation package with catalog and geometry data: complete catalog data with standard, material, weight and geometry, plus order texts according to DIN 21057DIN 21057 – Piping specs for process plants Series of standards for structuring piping specs: part 1 fundamentals and naming, further parts per material. It is the successor of PAS 1057; ASEING piping specs are based on it. Background and sources › for bills of materials and enquiries.
What is a family?
A family is a part type with all its sizes in a Plant 3D catalog, e.g. “Weld neck flange PN 16PN – Nominal pressure rating Designation for the pressure rating of flanges and valves (Pressure Nominal), e.g. PN 16. It corresponds roughly to the allowable pressure in bar at room temperature; at higher temperatures, less is allowed. Background and sources ›” from DN 15DN – Nominal size (DN) Designation for the size of pipes, fittings and valves (Diameter Nominal). It is roughly the inside diameter in millimeters but is not an exact dimension. Background and sources › to DN 500. In the Spec Editor, a family is created as a component (“Create Component”).
How are the catalogs calculated?
By number of part families: S up to 50 families price after login, M up to 150 families price after login, L up to 300 families price after login – catalog packages per material group: piping metal price after login · piping plastic price after login · valves & I&C price after login · ventilation & flue gas price after login; the complete package with all 52 catalogs costs price after login, each net plus VAT. The mega package (from €8,290; up to 3 users price after login · 4–10 users price after login · 11+ users price after login) adds PlantConfig Pro, PlantPlus and all online manuals, video courses and books – tier by number of Plant 3D users.
How long do I receive updates?
One year of download access including new versions – for single catalogs, catalog packages, bundles and the complete package; with the complete package also for newly added catalogs.
Who does the license cover?
Per company and site.
What should I keep in mind when importing new catalogs?
Always copy the .pcat file together with the subfolder of the same name, place components with block references in the linked content path, add new end types to the project and align the connection settings with the component properties. All steps are listed in the free catalog implementation quick reference; installation assistance (remote) is included in the complete package.
Why are the script-based catalogs available in a bundle?
Script-based catalogs are best used with the matching background knowledge. That is why they come in a bundle with the technical book – including ready-made Python scripts and catalogs as well as a ready-made piping spec.
Can you create piping specs to our requirements?
Yes – compiled, calculated to DIN EN 13480-3DIN EN 13480 – Metallic industrial piping The European standard for metallic industrial piping: part 2 materials, part 3 design and calculation, part 4 fabrication, part 5 inspection and testing. The Piping Spec Calculator sizes wall thicknesses according to part 3 – as a preliminary sizing, not a piping design. Background and sources › and with release management. More under Spec creation; for preliminary sizing, there is the free Piping Spec Calculator.

Before you go …
Don't miss any training dates, C³ invitations and news on AutoCAD Plant 3D and P&IDR&I – Piping and instrumentation diagram Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram). Background and sources ›.
Our newsletter only arrives when there's something important – concise and with tips from practice.
Standards status for this page 25 standards · researched October 2026
| Standard | Contents | Current edition | Replaced / successor |
|---|---|---|---|
| DIN EN 10216-2DIN EN 10216 – Seamless steel tubes for pressure purposes – Technical delivery conditions Series of standards for seamless pressure pipes: part 1 non-alloy steels at room temperature, part 2 steels for elevated temperatures (e.g. P235GH), part 5 stainless steels. It provides the strength values the Piping Spec Calculator uses for the preliminary sizing of the wall thickness. Background and sources › | Seamless steel tubes – Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties | DIN EN 10216-2:2025-02 | replaces DIN EN 10216-2:2020-04 |
| DIN EN 10217-2DIN EN 10217 – Welded steel tubes for pressure purposes – Technical delivery conditions Counterpart to DIN EN 10216 for welded pressure pipes, e.g. part 2 electric welded pipes for elevated temperatures, part 7 stainless steels. For welded pipes the weld joint factor z is added in the wall thickness calculation. Background and sources › | Welded steel tubes – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties | DIN EN 10217-2:2019-08 | replaces DIN EN 10217-2:2005-04 |
| DIN EN 10253-2DIN EN 10253 – Butt-welding fittings Series of standards for butt-welding elbows, tees, reducers and caps; part 2 for non-alloy and ferritic steels, part 4 for austenitic steels. In the piping spec, fittings usually refer to part 2 or 4. Background and sources › | Butt-welding pipe fittings – Part 2: Non-alloy and ferritic alloy steels with specific inspection requirements | DIN EN 10253-2:2026-07 | replaces DIN EN 10253-2:2021-11 |
| DIN EN 10253-3 | Butt-welding pipe fittings – Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements | DIN EN 10253-3:2009-02 (with Corrigendum 1:2013-07) | – |
| DIN EN 1092-1DIN EN 1092 – Flanges and their joints – Circular flanges, PN designated The flange standard by nominal pressure PN; part 1 covers steel flanges with types (e.g. type 11 weld neck flange), sealing faces (B1, C, D …) and dimensions. Annex G assigns the permissible pressure to the temperature for each material group. Background and sources › | Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 1: Steel flanges | DIN EN 1092-1:2018-12 | replaces DIN EN 1092-1:2013-04; DIN EN 1092-1 Corrigendum 1:2014-08 |
| DIN 21057 | Piping specs | DIN 21057-1:2023-08; Parts 5/6:2016-12; Parts 10–12:2026-04/-05 | replaces PAS 1057; DIN 21057-1:2016-12; DIN 21057-10 to -12:2017-04 |
| DIN EN 10216-5 | Seamless steel tubes – Part 5: Stainless steel tubes | DIN EN 10216-5:2021-06 | replaces DIN EN 10216-5:2014-03; DIN EN 10216-5 Corrigendum 1:2015-01 |
| DIN EN 10217-7 | Welded steel tubes – Part 7: Stainless steel tubes | DIN EN 10217-7:2021-06 | replaces DIN EN 10217-7:2015-01 |
| DIN EN 10253-4 | Butt-welding pipe fittings – Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements | DIN EN 10253-4:2025-10 | replaces DIN EN 10253-4:2008-06; DIN EN 10253-4 Corrigendum 1:2009-11 |
| DIN 11864-1DIN 11864 – Stainless steel valves for aseptic, chemical and pharmaceutical applications Series of standards for aseptic connections with minimal dead space: part 1 unions, further parts flange and clamp connections. It is chosen when work is sterile and DIN 11851 or DIN 32676 are not sufficient. Background and sources › | Stainless steel valves for aseptic, chemical and pharmaceutical applications – Part 1: Unions | DIN 11864-1:2025-04 | replaces DIN 11864-1:2017-10 |
| DIN 2873DIN 2873 – Flanged steel pipes and flanged steel fittings, glass lined – PN 10 and PN 25 Dimensional standard for glass-lined flanged steel pipes and flanged fittings – tees, crosses, reducers, spacers – in PN 10 and PN 25. The ASEING catalogs of the EMA group (enamel) are based on it. Background and sources › | Enameled steel flanged pipes and fittings – PN 10 and PN 25 | DIN 2873:2002-06 | replaces DIN 2873:1993-11 |
| DIN 8074DIN 8074 – Polyethylene (PE) pipes – PE 80, PE 100 – Dimensions Dimension standard for PE pipes: outside diameters and wall thicknesses per SDR series (e.g. PE 100 SDR 11). The requirements and tests are in DIN 8075. Background and sources › | Polyethylene (PEPE – Polyethylene Polyethylene, a thermoplastic for gas, water and wastewater pipes. “PE 100” indicates the strength class (MRS 10 MPa). Background and sources ›) pipes – PE 80, PE 100 – Dimensions | DIN 8074:2023-10 | replaces DIN 8074:2011-12 |
| DIN 8075DIN 8075 – Polyethylene (PE) pipes – PE 80, PE 100 – General quality requirements, testing Quality standard for pressure pipes made of PE 80 and PE 100: requirements for the moulding compound and the pipe, and the related tests. The dimensions are in DIN 8074 – which is why both are often cited together (“DIN 8074/8075”). Background and sources › | Polyethylene (PE) pipes – PE 80, PE 100 – General quality requirements, testing | DIN 8075:2018-08 | replaces DIN 8075:2011-12 |
| DIN 8077DIN 8077 – Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT – Dimensions Dimensional standard for PP pipes: outside diameters, wall thicknesses and S/SDR series, plus permissible operating pressures for water by temperature. The quality requirements are in DIN 8078. Background and sources › | Polypropylene (PPPP – Polypropylene Polypropylene, a thermoplastic for chemical, wastewater and hot water lines; more heat-resistant than PE. Background and sources ›) pipes – PP-H, PP-B, PP-R, PP-RCT – Dimensions | DIN 8077:2008-09 | – |
| DIN 8078DIN 8078 – Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT – General quality requirements and testing Quality standard for PP pipes: requirements for material and pipe, long-term hydrostatic strength and tests. Belongs to DIN 8077 (dimensions). Background and sources › | Polypropylene (PP) pipes – General quality requirements, testing | DIN 8078:2008-09 | replaces DIN 8078:2007-05 |
| DIN 24151DIN 24151 – Pipe components for ventilation systems – sheet metal tubes Former German series of standards for sheet metal tubes in ventilation systems, with class 1 and class 2 for different sheet thicknesses. It has been withdrawn; manufacturers of extraction and ventilation pipes still use it as a designation, e.g. “sheet thickness to DIN 24151 class 2”. Background and sources › | Ventilation – sheet metal ducts, welded (series 1/2) | withdrawn | now: DIN EN 12237:2003-07DIN EN 12237 – Ventilation for buildings – Ductwork – Strength and leakage of circular sheet metal ducts Specifies the strength and air tightness required of circular sheet metal ventilation ducts and how this is tested. Manufacturers state the air tightness class accordingly, e.g. class D. Background and sources › |
| DIN 24154DIN 24154 – Pipe components for ventilation systems – flat flanges Former German series of standards for flat flanges on ventilation and extraction pipes (classes 1, 2 and 4). Parts 1, 2 and 4 have been replaced by DIN EN 12220; manufacturers often still state the bolt hole pattern as “DIN 24154 R2”. Background and sources › | Duct components for ventilation systems – flat flanges, series 1 | withdrawn | now: DIN EN 12220:1998-06DIN EN 12220 – Ventilation for buildings – Ductwork – Dimensions of circular flanges for general ventilation European dimensional standard for circular flanges on ventilation ducts. It replaced parts 1, 2 and 4 of the former DIN 24154. Background and sources › |
| DIN EN 558DIN EN 558 – Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems Specifies the face-to-face dimensions (flange to flange) of flanged valves in basic series. This way valves from different manufacturers fit into the same installation gap; the basic series is in the valve catalog, the dimensions are supplied by the manufacturer. Background and sources › | Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems | DIN EN 558:2022-09 | replaces DIN EN 558:2017-05 |
| DIN EN ISO 17292DIN EN ISO 17292 – Metallic ball valves for petroleum, petrochemical and allied industries Product standard for metal ball valves used in plants of the petroleum, petrochemical, natural gas and allied industries. In the valve catalogs it is cited for the ball valves. Background and sources › | Metallic ball valves for petroleum, petrochemical and allied industries | DIN EN ISO 17292:2016-05 | replaces DIN EN ISO 17292:2004-11 |
| DIN EN 13709DIN EN 13709 – Industrial valves – Steel globe and globe stop and check valves Product standard for steel globe valves and globe stop and check valves – forged, cast or fabricated, in straight, angle or oblique pattern, with flanged, butt-welding, socket-welding or threaded ends. In the valve catalogs it is cited for the globe valves. Background and sources › | Industrial valves – Steel globe and globe stop and check valves | DIN EN 13709:2010-10 | replaces DIN EN 13709:2003-01 |
| DIN EN ISO 8434-1DIN EN ISO 8434 – Metallic tube connections for fluid power and general use Part 1 covers cutting ring and 24° cone fittings for instrumentation, control and hydraulic lines. It replaces the former DIN 3859 and DIN 2353. Background and sources › | Connectors for fluid power and general use – Part 1: 24° cone connectors | DIN EN ISO 8434-1:2018-11 | replaces DIN EN ISO 8434-1:2008-02; DIN EN ISO 8434-1 Corrigendum 1:2009-09; DIN 3859-2:1999-07DIN 3859 – Pipe fittings – Technical delivery conditions German standard with delivery conditions for pipe fittings (compression fittings). Dimensions and designs of the 24° fittings are now in DIN EN ISO 8434-1. Background and sources › |
| DIN 3015-1DIN 3015 – Fastening clamps – block clamps Series of standards for block clamps: two plastic clamp halves (e.g. PP or PA) bolted with steel parts, for pipes, hoses and cables. Part 1 is the light-duty series; a heavy-duty series covers larger diameters. Background and sources › | Fastening elements – Pipe clamps – Part 1: Light series (L) | DIN 3015-1:1999-01 | replaces DIN 3015-1:1997-07 |
| DIN 3567DIN 3567 – Pipe clamps for NW 20 to 500 Dimensional standard for steel pipe clamps (two equal halves, bolted, form A and B) for pipes from NW 20 to 500 – a standard pipe support part in plant construction. Background and sources › | Pipe clamps for NW 20NW – Nominal size (former notation) Former German notation for the nominal size. Today it is DN according to DIN EN ISO 6708, e.g. DN 50 instead of NW 50. Background and sources › to 500 | DIN 3567:1963-08 | – |
| DIN 3570DIN 3570 – Round steel U-bolts for pipes from NW 20 to 500 Dimensional standard for round steel U-bolts: they fasten standing or suspended pipelines, masts and similar round parts, and hold pipe shoes on steel sections, e.g. on pipe racks. Background and sources › | Round steel U-bolts for pipes from NW 20 to 500 | DIN 3570:1968-10 | – |
| DIN EN 13480-3 | Metallic industrial piping – Part 3: Design and calculation | DIN EN 13480-3:2024-12 | replaces DIN EN 13480-3:2017-12; DIN EN 13480-3/A1A1, A2 … – Amendment of a standard Amendment of a standard. It is followed by the year of issue, e.g. A2:2019 = second amendment, published in 2019. The standard and its amendments apply together. Background and sources ›:2021-05; DIN EN 13480-3/A2:2020-12 |
Researched at DIN Media, ISOISO – International Organization for Standardization International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards). Background and sources ›, IECIEC – International Electrotechnical Commission International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control. Background and sources › and ASMEASME – American Society of Mechanical Engineers US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide. Background and sources ›, as of October 2026. Before binding use, please check the current edition with the standards publisher. Overview of all standards: Plant Engineering Infobase · Standards status.
Terms, background and sources 37 terms on this page
Brief explanations for reference. They do not replace the standard or code itself.
- EN – European Standard
European Standard, developed by CEN (general) or CENELEC (electrical engineering).
Every member country must adopt an EN unchanged as a national standard – in Germany as “DIN EN …”. Conflicting national standards are withdrawn.
- DIN – German Institute for Standardization
German Institute for Standardization in Berlin: it publishes the German standards (DIN standards) and represents Germany in CEN and ISO.
DIN was founded in 1917 as the Standards Committee of German Industry. If “DIN EN” or “DIN EN ISO” precedes the number, a European or international standard has been adopted unchanged as a German standard.
- BOM – Bill of Materials
Bill of Materials – parts or material list. In AutoCAD Plant 3D the BOM-ATTRIBUTES section of Iso.atr defines the component properties on the isometric.
- DIN 21057 – Piping specs for process plants
Series of standards for structuring piping specs: part 1 fundamentals and naming, further parts per material. It is the successor of PAS 1057; ASEING piping specs are based on it.
- PN – Nominal pressure rating
Designation for the pressure rating of flanges and valves (Pressure Nominal), e.g. PN 16. It corresponds roughly to the allowable pressure in bar at room temperature; at higher temperatures, less is allowed.
Specified in DIN EN 1333. The pressure-temperature ratings for each material are given in the component standards, e.g. DIN EN 1092-1 for steel flanges.
- DN – Nominal size (DN)
Designation for the size of pipes, fittings and valves (Diameter Nominal). It is roughly the inside diameter in millimeters but is not an exact dimension.
Specified in DIN EN ISO 6708. Which outside diameter belongs to a DN is defined in the dimensional standards, e.g. DIN EN 10220 for steel pipes.
- DIN EN 13480 – Metallic industrial piping
The European standard for metallic industrial piping: part 2 materials, part 3 design and calculation, part 4 fabrication, part 5 inspection and testing. The Piping Spec Calculator sizes wall thicknesses according to part 3 – as a preliminary sizing, not a piping design.
Current parts 1 to 6 and 8 in the 2024-12 edition; part 7 (conformity assessment) is a technical report, DIN CEN/TR 13480-7.
- R&I – Piping and instrumentation diagram
Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram).
Symbols and drawing rules: DIN EN ISO 10628-1 and -2. Identification letters for instrumentation: DIN EN 62424 or ISA-5.1.
- DIN EN 10216 – Seamless steel tubes for pressure purposes – Technical delivery conditions
Series of standards for seamless pressure pipes: part 1 non-alloy steels at room temperature, part 2 steels for elevated temperatures (e.g. P235GH), part 5 stainless steels. It provides the strength values the Piping Spec Calculator uses for the preliminary sizing of the wall thickness.
- DIN EN 10217 – Welded steel tubes for pressure purposes – Technical delivery conditions
Counterpart to DIN EN 10216 for welded pressure pipes, e.g. part 2 electric welded pipes for elevated temperatures, part 7 stainless steels. For welded pipes the weld joint factor z is added in the wall thickness calculation.
- DIN EN 10253 – Butt-welding fittings
Series of standards for butt-welding elbows, tees, reducers and caps; part 2 for non-alloy and ferritic steels, part 4 for austenitic steels. In the piping spec, fittings usually refer to part 2 or 4.
- DIN EN 1092 – Flanges and their joints – Circular flanges, PN designated
The flange standard by nominal pressure PN; part 1 covers steel flanges with types (e.g. type 11 weld neck flange), sealing faces (B1, C, D …) and dimensions. Annex G assigns the permissible pressure to the temperature for each material group.
- DIN 11864 – Stainless steel valves for aseptic, chemical and pharmaceutical applications
Series of standards for aseptic connections with minimal dead space: part 1 unions, further parts flange and clamp connections. It is chosen when work is sterile and DIN 11851 or DIN 32676 are not sufficient.
- DIN 2873 – Flanged steel pipes and flanged steel fittings, glass lined – PN 10 and PN 25
Dimensional standard for glass-lined flanged steel pipes and flanged fittings – tees, crosses, reducers, spacers – in PN 10 and PN 25. The ASEING catalogs of the EMA group (enamel) are based on it.
- DIN 8074 – Polyethylene (PE) pipes – PE 80, PE 100 – Dimensions
Dimension standard for PE pipes: outside diameters and wall thicknesses per SDR series (e.g. PE 100 SDR 11). The requirements and tests are in DIN 8075.
- PE – Polyethylene
Polyethylene, a thermoplastic for gas, water and wastewater pipes. “PE 100” indicates the strength class (MRS 10 MPa).
Abbreviations for plastics according to DIN EN ISO 1043-1.
- DIN 8075 – Polyethylene (PE) pipes – PE 80, PE 100 – General quality requirements, testing
Quality standard for pressure pipes made of PE 80 and PE 100: requirements for the moulding compound and the pipe, and the related tests. The dimensions are in DIN 8074 – which is why both are often cited together (“DIN 8074/8075”).
- DIN 8077 – Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT – Dimensions
Dimensional standard for PP pipes: outside diameters, wall thicknesses and S/SDR series, plus permissible operating pressures for water by temperature. The quality requirements are in DIN 8078.
- PP – Polypropylene
Polypropylene, a thermoplastic for chemical, wastewater and hot water lines; more heat-resistant than PE.
Abbreviations for plastics according to DIN EN ISO 1043-1.
- DIN 8078 – Polypropylene (PP) pipes – PP-H, PP-B, PP-R, PP-RCT – General quality requirements and testing
Quality standard for PP pipes: requirements for material and pipe, long-term hydrostatic strength and tests. Belongs to DIN 8077 (dimensions).
- DIN 24151 – Pipe components for ventilation systems – sheet metal tubes
Former German series of standards for sheet metal tubes in ventilation systems, with class 1 and class 2 for different sheet thicknesses. It has been withdrawn; manufacturers of extraction and ventilation pipes still use it as a designation, e.g. “sheet thickness to DIN 24151 class 2”.
“Similar to DIN 24151/24154” describes pipe systems that follow these series for pipes and flat flanges.
- DIN EN 12237 – Ventilation for buildings – Ductwork – Strength and leakage of circular sheet metal ducts
Specifies the strength and air tightness required of circular sheet metal ventilation ducts and how this is tested. Manufacturers state the air tightness class accordingly, e.g. class D.
- DIN 24154 – Pipe components for ventilation systems – flat flanges
Former German series of standards for flat flanges on ventilation and extraction pipes (classes 1, 2 and 4). Parts 1, 2 and 4 have been replaced by DIN EN 12220; manufacturers often still state the bolt hole pattern as “DIN 24154 R2”.
- DIN EN 12220 – Ventilation for buildings – Ductwork – Dimensions of circular flanges for general ventilation
European dimensional standard for circular flanges on ventilation ducts. It replaced parts 1, 2 and 4 of the former DIN 24154.
- DIN EN 558 – Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems
Specifies the face-to-face dimensions (flange to flange) of flanged valves in basic series. This way valves from different manufacturers fit into the same installation gap; the basic series is in the valve catalog, the dimensions are supplied by the manufacturer.
- DIN EN ISO 17292 – Metallic ball valves for petroleum, petrochemical and allied industries
Product standard for metal ball valves used in plants of the petroleum, petrochemical, natural gas and allied industries. In the valve catalogs it is cited for the ball valves.
- DIN EN 13709 – Industrial valves – Steel globe and globe stop and check valves
Product standard for steel globe valves and globe stop and check valves – forged, cast or fabricated, in straight, angle or oblique pattern, with flanged, butt-welding, socket-welding or threaded ends. In the valve catalogs it is cited for the globe valves.
- DIN EN ISO 8434 – Metallic tube connections for fluid power and general use
Part 1 covers cutting ring and 24° cone fittings for instrumentation, control and hydraulic lines. It replaces the former DIN 3859 and DIN 2353.
- DIN 3859 – Pipe fittings – Technical delivery conditions
German standard with delivery conditions for pipe fittings (compression fittings). Dimensions and designs of the 24° fittings are now in DIN EN ISO 8434-1.
- DIN 3015 – Fastening clamps – block clamps
Series of standards for block clamps: two plastic clamp halves (e.g. PP or PA) bolted with steel parts, for pipes, hoses and cables. Part 1 is the light-duty series; a heavy-duty series covers larger diameters.
- DIN 3567 – Pipe clamps for NW 20 to 500
Dimensional standard for steel pipe clamps (two equal halves, bolted, form A and B) for pipes from NW 20 to 500 – a standard pipe support part in plant construction.
- NW – Nominal size (former notation)
Former German notation for the nominal size. Today it is DN according to DIN EN ISO 6708, e.g. DN 50 instead of NW 50.
- DIN 3570 – Round steel U-bolts for pipes from NW 20 to 500
Dimensional standard for round steel U-bolts: they fasten standing or suspended pipelines, masts and similar round parts, and hold pipe shoes on steel sections, e.g. on pipe racks.
- A1, A2 … – Amendment of a standard
Amendment of a standard. It is followed by the year of issue, e.g. A2:2019 = second amendment, published in 2019. The standard and its amendments apply together.
- ISO – International Organization for Standardization
International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards).
ISO was founded in 1947. Its members are the national standards bodies; for Germany, this is DIN.
- IEC – International Electrotechnical Commission
International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control.
IEC was founded in 1906. IEC standards adopted in Europe are called “EN IEC …” or “EN 6xxxx”.
- ASME – American Society of Mechanical Engineers
US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide.
ASME was founded in 1880. Well-known codes: B31.3 (process piping), B16.5 (flanges), B36.10M and B36.19M (pipe dimensions).
Sources and origins
- CEN and CENELEC – European standardization (for EN, PN)
- DIN – German Institute for Standardization (for DIN, PN, DN, A1, A2 …)
- Wikipedia: Bill of materials (for BOM)
- DIN Media: DIN 21057-1:2023-08 (for DIN 21057)
- ISO 6708 – Pipework components, definition and selection of DN (for DN)
- DIN Media: DIN EN 13480-1:2024-12 (for DIN EN 13480)
- ISO – International Organization for Standardization (for R&I, PE, PP, NW, ISO)
- IEC – International Electrotechnical Commission (for R&I, IEC)
- DIN Media: DIN EN 10216-1:2014-03 (for DIN EN 10216)
- DIN Media: DIN EN 10217-1:2019-08 (for DIN EN 10217)
- DIN Media: DIN EN 10253-2:2026-07 (for DIN EN 10253)
- DIN Media: DIN EN 1092-1:2018-12 (for DIN EN 1092)
- DIN Media: DIN 11864-1:2025-04 (for DIN 11864)
- DIN: DIN 2873:2002-06 (for DIN 2873)
- DIN Media: DIN 8074:2023-10 (for DIN 8074)
- DIN Media: DIN 8075:2018-08 (for DIN 8075)
- DIN Media: DIN 8077:2008-09 (for DIN 8077)
- DIN Media: DIN 8078:2008-09 (for DIN 8078)
- DIN Media: DIN 24151-1 (sheet metal tubes, class 1, welded) (for DIN 24151)
- DIN Media: DIN EN 12237:2003-07 (for DIN EN 12237)
- DIN Media: DIN 24154-2 (replaced by DIN EN 12220) (for DIN 24154)
- DIN Media: DIN EN 12220 (for DIN 24154, DIN EN 12220)
- DIN Media: DIN EN 558:2022-09 (for DIN EN 558)
- DIN Media: DIN EN ISO 17292:2016-05 (for DIN EN ISO 17292)
- DIN Media: DIN EN 13709:2010-10 (for DIN EN 13709)
- DIN Media: DIN EN ISO 8434-1:2018-11 (for DIN EN ISO 8434)
- DIN Media: DIN 3859 (for DIN 3859)
- DIN: DIN 3015-1 (light duty) (for DIN 3015)
- DIN Media: DIN 3567 (for DIN 3567)
- DIN Media: DIN 3570 (for DIN 3570)
- ASME – American Society of Mechanical Engineers (for ASME)