Plant Engineering Infobase · Questions from practice
Questions from practice: P&ID, Plant 3D, piping specs, AutoCAD
671 questions that were really asked in our training courses and in support – with the answer from practice. Free and without login.
AutoCAD P&ID (154)
How do I back up my customized interface so it doesn't get lost?
First set up palettes, toolbars, the menu barbar – Unit of pressure Unit of pressure: 1 bar = 100,000 Pa = 0.1 MPa. In plant engineering, it usually refers to the gauge pressure relative to the surroundings (often “barg” or, in German, “bar ü”). Background and sources › and options. Then, via the gear icon in the status bar or the workspace selector in the Quick Access Toolbar, choose "Save Current As". It is advisable to keep the name of the original workspace and append your own abbreviation, e.g. "P&ID ISOR&I – Piping and instrumentation diagram Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram). Background and sources ›ISO – International Organization for Standardization International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards). Background and sources › AB". This preserves the original, and you can see which workspace yours is based on. Save again after, for example, switching the palette group – otherwise changes are lost the next time you open Customize User Interface.
After copying, objects show a question mark instead of a number. Why – and how do I assign new tags?
A tag may occur only once in the project; a copy would get the same number, so the program sets a "?". Right-click the object at its edge and choose "Assign Tag"; the button next to the number assigns the next available number. If you have already placed the annotation, deactivate "Place annotation after assigning tag" – otherwise a second annotation is created, which you then select and delete. Preferably copy with the COPY command instead of Ctrl+C/Ctrl+V and use a crossing window (from right to left) so that connected lines are copied as well.
How do I record revision states and restore older drawing versions?
A proven approach: plot every issue as a PDFPDF – Portable Document Format File format for documents that looks the same on every device and can be printed – e.g. the piping class sheet. Background and sources ›, with the revision index in the file name and title block. In addition, back up the entire project at each revision point – with the project closed, copy the project folder or store it as a ZIPZIP – ZIP archive Compressed archive containing several files in one file. Windows opens it without additional software, e.g. catalog and pipe spec for Plant 3D. Background and sources › with the date in the name. You can retrieve individual drawings from it via "Copy Drawings to Project". If, on the other hand, you only swap DWGDWG – AutoCAD drawing format AutoCAD file format for drawings and 3D models; AutoCAD Plant 3D and AutoCAD P&ID also save in this format. Background and sources › files in the project folder, the drawing and the project database no longer match.
Why should the project name not contain spaces or special characters?
When you create a project, the project name is also used as the name of the project folder. Spaces, special characters and very long paths can later cause problems with access, copying or backups. A proven approach is a project number with a short name and underscores, e.g. "2026_001_Pumpstation". Enter the full project description in the Description field of the wizard – spaces are no problem there and the text can be changed at any time. Also, do not create projects in synchronized cloud folders, as creating them there can take a very long time.
How can I tell whether a line is correctly connected to equipment?
A plus sign at the end of a line means: not connected. When connected correctly, a nozzle is placed and annotated automatically. For a grid-accurate connection, use Shift + right-click > "Apparent Intersection" and click the line and the equipment outline. In P&ID, preferably use the object snaps Nearest, Node and, if needed, Perpendicular – Endpoint and Midpoint often lead to connections off the grid.
The Project Wizard is not displayed correctly or crashes – what could be the cause?
A common cause is Windows display scaling above 100% (e.g. 125%). Right-click the desktop > Display settings, set scaling to 100%, sign out of Windows and back in, and restart AutoCAD P&ID or Plant 3D. The wizard is then usually displayed in full.
The flow arrows point in the wrong direction. How do I reverse the flow direction?
The flow direction results from the direction in which the line was drawn. Right-click the line and choose Schematic Line Edit > Reverse Flow. The arrows are flipped and the line's From/To information is adjusted. Then hover over the line: the tooltip shows from which object to which object the line runs. Validation also shows you flow direction conflicts.
How do I remove part of a line or insert a gap at a crossing?
Right-click the line > "Schematic Line Edit": 1. "Break" – click the break point once and confirm with Enter; then select only the superfluous section and delete it. 2. "Join" puts separated parts back together. 3. "Add Gap" inserts a break at a crossing. You do not remove a gap by deleting the symbol but via "Remove Gap". 4. "Reverse Flow" reverses the flow direction.
Where do I enter the project information that should appear in the title block?
In the Project Manager, right-click the project name (top level) and choose the last entry in the context menu (Project Setup). Under "Project Details", fill in the fields used in the title block and in lists. There you can also enable the prompt for the edit history – a comment on the change is then requested when saving. The first time, also check whether the path to the drawing template (DWTDWT – Drawing template AutoCAD template file (drawing template): new drawings take their layers, styles and settings from it. Background and sources ›) is accessible.
How do I organize the symbols in my P&ID tool palette so I can quickly find my own or modified symbols?
Drag the symbols to the desired position by drag and drop – also between palettes or groups. Insert separators via the palette's context menu; this lets you form symbol groups and sort them as needed.
How do I place a valve with actuator and fail-safe position in the P&ID?
Place the shut-off valve from the In-Line Objects onto the line and assign a tag; in the following dialog, select and assign the actuator (e.g. diaphragm); in the next menu, select the fail-safe position.
My tool palette has disappeared or shows the wrong symbols. How do I get it back?
Press Ctrl+3 or use Tools > Palettes > Tool Palettes to show the palette again (Properties: Ctrl+1). If it shows the wrong symbols, right-click the title bar of the palette and select the palette group that matches the project, e.g. the ISO group. The palette must match the symbol standard the project was created with – symbols from different standards are generally not interchangeable. It is best to dock the palette at the edge of the screen and then save your workspace.
May I open P&ID drawings by double-clicking in Explorer or copy them with "Save As"?
No. Plant drawings belong to a project with a database and should be created, opened, and closed only via the Project Manager. “Save As” creates a copy of the drawing with the same objects – as a result, entries can be counted twice in the project and bills of materials become wrong. Save only with Ctrl+S. Create new drawings by right-clicking “P&ID Drawings” > New Drawing, not via the plus tab. To reuse an existing drawing, use “Copy Drawings to Project” in the Project Manager. Related support question: “How do I bring P&ID drawings from an older project into a new one?” In the Project Manager, right-click “P&ID Drawings” > “Copy Drawings to Project” and select the DWG from the old project. This way no project files need to be reworked – drawings copied in Explorer, by contrast, are not cleanly part of the project.
How do I copy P&ID content into another drawing without losing properties?
Copy with a base point: select the objects, press Ctrl+Shift+C, enter base point 0,0, then in the target drawing press Ctrl+V and enter 0,0 again. With a simple Ctrl+C/Ctrl+V, the P&ID properties are not reliably carried over. Within a drawing, use the AutoCAD COPY command. For similar P&IDs, create a new drawing in the project and copy the content of the template drawing into it this way. The prerequisite is that the classes used exist in the target project.
How do I insert a reducer and change the nominal size on one side?
Select the reducer in the tool palette and place it directly on the line; it must connect, and the line is then split automatically. Then change the nominal size of the side concerned, e.g. via the annotation or the Properties window of the line segment; the symbol adjusts accordingly. If the reducer in a vertical line points in the wrong direction, change the nominal size directly on the respective line segment.
How do I draw a line that does not visually run through a vessel or filter?
Right-click the line and select Schematic Line Edit > Add Gap. Then click the point before and after the equipment; the line is broken there but remains one continuous line. The gap can be moved later using its grips. Where lines cross, the program creates gaps automatically. Whether a gap or a loop is displayed and how large it is, is defined by the administrator in Project Setup under P&ID DWG Settings in the line settings.
The reducer does not rotate after the nominal size is changed. What am I doing wrong?
The reducer follows the nominal sizes of the connected line sections. Therefore assign the nominal size directly to the line segment (click the line > Properties, or right-click > Assign Tag) and not only via the annotation. For horizontal lines, double-clicking the reducer annotation also works; for vertical lines, assigning it on the segment is more reliable. If it still does not rotate, delete the reducer, decide which nominal size is to be kept, insert it again and then change the nominal size of the affected run.
How do I change the width or height of a vessel afterwards?
Vessels are scaled on insertion (enter the value in the command line, then the rotation angle). Afterwards, select the vessel and change the scale factors for the respective direction in the Properties window. Other symbols such as pumps or filters have a fixed standard size; on insertion, only the position or direction is prompted.
Why can't lines or symbols from a palette be drawn, or why do they appear white?
Tool palettes only refer to symbols in Project Setup. If the palette does not match the project's standard set (e.g. an ISAISA – International Society of Automation US association for automation. Its standard ISA-5.1 specifies symbols and identification letters for instrumentation. Background and sources › or DINDIN – German Institute for Standardization German Institute for Standardization in Berlin: it publishes the German standards (DIN standards) and represents Germany in CEN and ISO. Background and sources › palette in an ISO project) or the symbols are missing in the project, the tools do not work or are displayed as white placeholders. Use the palette group belonging to the project and the matching workspace. Missing symbols must first be brought into Project Setup, e.g. via project comparison.
“Remove Filter” in the Data Manager has no effect – what can you do?
A filter in the Data Manager can only be removed at the node where it was set. To do so, select the node (e.g. the higher level Equipment) and right-click Remove Filter there.
How do I jump from the Data Manager to an object in the drawing?
Select the entire row using the field on the far left (not just a data cell) and activate the Zoom button (magnifying glass) – the program then zooms to the object. Other functions: hide empty columns, filter by selection, Refresh (synchronizes drawing and data). You can drag and drop property values into the drawing as annotations. If the Data Manager has "disappeared", it is often auto-hidden at the edge of the screen.
Why should I draw with grid snap in P&ID, and how do I still hit points outside the grid?
P&ID symbols are matched to a grid; in the ISO templates, snap is set to 2.5 mm. Only then do you reliably hit the connection points of the symbols, and the schematic looks tidy. You can find the settings by right-clicking the snap icon in the status bar under Snap Settings. If you need to snap to a point outside the grid, briefly switch off grid snap with F9F9 Function key in AutoCAD: turns snap mode on or off – the cursor then jumps to the grid points. Background and sources › and use object snap. Move objects that have slipped back onto the grid with MOVE via a base point. Transparency should stay switched off in P&ID, as it slows down large drawings.
Why shouldn't I drag P&ID symbols from the tool palette by drag & drop?
When dragging, the symbol is placed uncontrolled and grid snap is bypassed – it then lies off the grid and lines are later connected at an angle. Instead, click the symbol once in the tool palette; it then hangs on the cursor and you set the insertion point on the grid. In P&ID, always keep grid snap turned on; the template is matched to the symbol sizes.
Plant 3D behaves strangely after a longer break or cannot save – what helps?
After a long idle period or network dropouts, the connection to the project database can be lost. Typical symptoms are messages that a drawing is being used by another session, or functions not responding. Save, close Plant 3D completely (e.g. Alt+F4 and confirm the save prompts), and restart. Recommendation: close Plant 3D before longer breaks. Related support question: “Plant 3D reports “Project locked by another user” although nobody is working in it – what is the cause?” Check the Windows user's rights on the project folder. In the support case, it was due to user rights.
The ribbon or palettes have suddenly moved or disappeared – how do I get them back?
You want your familiar interface back. 1. Use the "Workspace Switching" gear to switch briefly to another workspace and back to the P&ID workspace. 2. If the ribbon is missing entirely, enter RIBBON; if individual tabs or panels are missing, show them again by right-clicking the ribbon. 3. Under Options > Profiles, check whether the correct profile is current, and under Options > Files > Customization Files, whether the main customization file is entered. 4. In the workspace settings, check whether changes are saved automatically; deactivate this and save the desired state under a name of your own. Advantage: accidental changes are not applied permanently.
Gaps appear in P&ID lines at flow arrows – what is the cause?
In AutoCAD Plant 3D 2025 without the update, gaps appear in P&ID lines at flow arrows. Check the version with _ABOUT and install the update; alternatively, deactivate flow arrows in the project configuration.
Can the 255-character limit of the drawing properties be increased, or the input length limited?
Neither can be set: each value holds up to 255 characters, and when you create a drawing property you only define a name and a value. Do you still want long revision texts? Create a separate property for each table cell (e.g. REV_A_INDEX, REV_A_DATUM, REV_A_TEXT), distribute very long texts across two fields in the same cell – or manage revisions as a revision line (Non-Engineering palette): each revision is then its own object in the Data Manager and can be exported to Excel.
How do I export only the data of one drawing or one area from the Data Manager?
In the Data Manager, select the desired node (e.g. the drawing) and use the option “Active nodes only” when exporting. Then only this data is exported to Excel.
P&ID drawings opened in plain AutoCAD show no objects – how do I make them visible?
You want to view or pass on a P&ID drawing in AutoCAD without Plant 3D. There, P&ID objects appear only as proxy graphics; there is no Object Enabler for P&ID. 1. To view: in AutoCAD, set the system variable PROXYSHOWPROXYSHOW AutoCAD system variable: determines how proxy objects – objects from a program that is not currently loaded – are shown: 0 = not, 1 = in full, 2 = as bounding box only. Background and sources › to 1 and run REGENREGEN AutoCAD command: regenerates the display of the drawing in the current viewport. Background and sources ›. 2. To edit in AutoCAD: open the drawing in Plant 3D, right-click it in the Project Manager and select the export to AutoCAD (Export to AutoCAD). 3. Select the location, file name and DWG format and save. Advantage: P&ID components become AutoCAD blocks, lines become lines – the exported file can be opened, edited and plotted in AutoCAD. You continue to edit the original drawing only in Plant 3D.
Why does an off-page connector show a yellow exclamation mark even though the connection works?
Plant 3D compares all properties of the connected lines but shows only some of them under "Show Connection". Align differences in fields that are not shown (e.g. comment, slope, custom fields) in the properties of both lines and save both drawings. If the deviations come from inherited fields, e.g. the drawing area, they are intentional – then you can ignore the message. A Data Manager view of the off-page connectors by line tag and connection number helps with checking: only two arrows may appear per number.
Manual valves and control valves look different – how do I make them consistent?
Put manual valves and control valves on the same layer and align the nominal size label identically for both. The quickest way is to switch the control valve to the layer of the manual valves.
Where does the information in the title block come from, and how do I insert a revision row?
Insert the title block and revision row in the layout from the palette of non-engineering items; drawing is done in model space only. The content comes from Project Setup (project details/project data such as project number, address) and from the drawing properties (right-click the drawing in the Project Manager > Properties, e.g. DWG number, title). You do not enter revisions directly in the title block; instead, insert a revision row for each revision and fill it in via the properties. Revision rows are stored in the database and can be analyzed in the Data Manager.
How do I edit P&ID data (many properties at once) in Excel and import it again?
1. In the Data Manager, select the required node, e.g. Equipment, and click Export – "active node only" produces exactly one table; with child nodes, several sheets are created. 2. Change the values in Excel; do not change the column with the internal IDID – Identifier Unique identifier, e.g. the number under which a record is kept in a database. Background and sources › (PnPID), as it is used for matching. If the sheet is protected: Review > Unprotect Sheet. 3. Save the file and close Excel, otherwise it is locked. 4. In the Data Manager, select the same node and click Import. Changed values are highlighted and can be accepted individually or with "Accept All".
After copying P&ID objects, the transferred fields are empty – what did I do wrong?
First fill in the drawing properties that go into the tag, and do not overwrite the values on the line by hand. The line then passes its values on to valves, inline objects and I&C via the acquisition rule.
How do I keep process-oriented numbering when equipment is added later?
Automatic incrementing does not know the process sequence: it always takes the next higher number, and deleted numbers are not reused either. A proven approach: draw first and leave the tag with a question mark, number later and enter the number manually if needed (with gaps for later additions if necessary). You can change many numbers at once in the Data Manager or via Excel export and import.
Why does the line have a different number before and after inserting a pump?
This is controlled by the symbol's connection type (Class Definitions > Edit Symbol). Pumps are segment group breakers by default: they split the line group, which is why two line numbers are created. Valves are inline objects – the line runs through them. Reducers and spec changes are segment breakers (new segment, same line). Vessels and other equipment are end lines; a line starting there gets a new number. For your own breaker symbols, set the appropriate connection type.
How do I replace an existing line in the P&ID with a different line type without redrawing it?
You want to switch existing lines to a different line type, e.g. after adjusting the project configuration. You do this directly in the drawing via substitution. 1. Click the line in the drawing. 2. Click the substitution grip and select the desired line type in the substitution palette. 3. Check the display and properties of the line. Only objects of the same class are available for selection in the substitution palette. Advantage: you do not have to redraw the line.
When importing from Excel into the Data Manager, the same values are highlighted yellow again with every import – why?
The content is longer than the permitted field length. Plant 3D or P&ID truncates it on import; the Excel list still contains the long text, so every import reports a change. Shorten the text in Excel to the field length.
The signal line does not transfer any values between instrument and line. What is the cause?
Whether properties are acquired via a signal line depends on the configuration and the drawing direction. In the configuration shown, acquisition works when the signal line is drawn from the instrument to the object (line, valve or equipment). Also check that both ends are really connected: when you click the signal line, the end must be shown as round; a plus means open. Update connections that have already been drawn with PLANTREFRESHACQUIREDPROPERTIESPLANTREFRESHACQPROPERTY Command in AutoCAD Plant 3D and AutoCAD P&ID: updates acquired properties – e.g. the line number from an acquisition rule – on objects already drawn. Background and sources ›.
Can I rename a project in AutoCAD Plant 3D afterwards?
You want to change the name of a running project: since version 2026 this is possible in Project Setup. How to proceed: 1. Back up the project. 2. Open Project Setup and expand “General Settings”. 3. Click “Project Details”. 4. Under “General Properties” change the “Project name” field and confirm. Do not use spaces or special characters in the new name either. Note: the Autodesk Help only describes the “Project name” field. It says nothing about the project folder and the file names – so do not rename the project folder by hand. Your advantage: you do not have to create a new project for a new name. Background: wish from the Idea Station, ideas 9264328 (35 votes) and 8454443 (12 votes), as of 07.11.2026. Source: Autodesk Help, What’s New in AutoCAD Plant 3D 2026, “Project Enhancements”. Next step: if your project behaves differently than described, write to support@seitz-ingenieure.de – we will look at it together via remote session.
How do I create custom views in the Data Manager, e.g. nozzles by equipment or order status?
In Project Setup, under the Data Manager configuration, choose "Create View" and define the name and scope (project or drawing). Use "New Level" to build the grouping: first filter the object type (e.g. nozzles), then add further levels by fields such as equipment tag, line tag, manufacturer or a yes/no field "ordered". You will then find the view in the Data Manager under the custom project or drawing views. After changes, reload with the Refresh icon.
How do I get symbols from the configuration, e.g. nozzles, into my tool palette?
First open the target palette. Then go to Project Setup > P&ID DWG Settings > P&ID Class Definitions, select the class (e.g. Engineering Items > Nozzles > desired nozzle) and click "Add to Tool Palette" in the toolbar above the preview. The symbol is added at the end of the currently open palette and can be dragged and dropped to another palette.
A partner is to continue working on our P&ID drawings – what do I hand over?
If the partner continues working with AutoCAD P&ID, pass on the entire project including templates (DWT) and piping specs. If they work only with AutoCAD, export the drawings to AutoCAD via the Project Manager; this preserves, for example, the end connections.
How do I add my own drawing and project properties, e.g. for the title block?
In Project Setup under General Settings > Drawing Properties, first create a category (e.g. "Title block") and the properties below it (e.g. plant section, building); in the Description field you can store an explanatory text. Enter the values for each drawing in the Project Manager: right-click the drawing > Properties. Create project-wide information (e.g. architect, plant designer) in the same way under Project Details. Both types of values can be used in the title block and in tag formats.
How do I make good use of validation, and what do I do with messages that are not errors?
First define in the validation settings what is checked; without a 3D model, deactivate the 3D checks. After "Run Validation", clicking a message zooms to the object. Open the drawing beforehand via the Project Manager, otherwise it is read-only and corrections cannot be saved. After the correction, refresh the node. Set intentional messages (e.g. drawing frames, manhole nozzles, automatically created signal lines) to "Ignore" with a right-click and hide ignored items.
The P&ID commands are missing from the right-click menu, and objects cannot be deleted with Del – how do I get this back?
Set the system variable PICKFIRSTPICKFIRST AutoCAD system variable: determines whether objects can be selected before the command (1) or only after the command is started (0). Background and sources › to 1 (command line: PICKFIRST, 1, Enter). If it is set to 0, objects can only be selected after invoking the command: the shortcut menu then does not show the P&ID functions, tags cannot be assigned, and Del does not delete.
How do I subsequently change a P&ID line to a different medium so that color and linetype change with it?
Select the line, right-click > “Replace” and choose the target line from the palette – style, color and lineweight adapt. The option is missing as long as the line is connected with leader arrows.
How do vessels automatically get a visible nozzle when a line is connected?
In the P&ID class definitions, select the equipment class (e.g. Equipment > Tanks > the vessel you want) and open "Edit Symbol". In the "Default Nozzle" row, select a real nozzle instead of the point nozzle, e.g. the flanged ISO nozzle. Plant 3D then places this nozzle automatically when you connect a line; you can replace it with a different one in the drawing at any time. Tip: the Data Manager can only zoom to nozzles that are visible in the drawing.
The small annotation format window is missing in the Block Editor – where is it?
If the small annotation format window is not visible in the Block Editor, it is usually located on another monitor or one that no longer exists. With the Block Editor open, swap the order of the monitors in the Windows display settings, drag the window to the monitor with AutoCAD, and then restore the original order.
How do I generate lists, e.g. a valve list, with the Report Creator?
1. Start Report Creator via Windows Start > All Apps > AutoCAD Plant 3D folder. 2. Open the project (Project.xml) and choose the scope (entire project or individual folders). 3. Select a report – integrate company-specific report templates via a custom path. 4. Use Edit to adjust the query and layout. Note: Report Creator lists are for output only; to write values back, use export/import in the Data Manager. Related support question: “When do I use the Data Manager Excel export and when do I use Report Creator?” The Data Manager export is intended for data exchange: define columns via the export/import definition; it can be re-imported but has no title block. Report Creator produces print-ready lists with layout, also across classes and with totals – it is not suitable for re-import.
Why can't I correct errors from the validation summary directly in the drawing?
If a drawing is opened via the validation summary, it is read-only. First open the drawing concerned normally via the Project Manager and then click the error in the summary – the program zooms to the location and you can correct it. "Refresh" runs the check again. Messages that are correct from a technical point of view (e.g. nozzles for manholes without a line) can be ignored and hidden.
A reference arrow does not show an inherited property, or only after several restarts – what is the cause?
If an off-page connector does not show an acquired property, or only after several program restarts, a multiple data source may be the cause: the segments of a line group have different values (e.g. operating pressure). Enter the same value in all segments, and it is acquired immediately. The drawing checker (PLANTDWGCHECKERPLANTDWGCHECKER AutoCAD P&ID command: compares the texts in the drawing with the property values in the project database (drawing checker). Background and sources ›) does not fix this case.
How do I force a prompt for an edit history entry when a drawing is closed?
The edit history is kept for each drawing at the bottom of the Project Manager; an entry is created when the drawing is saved and closed. To require users to enter a comment at that point, open Project Setup > Project Details and set the edit history prompt to "When closing project drawings". The next time a drawing is closed, a dialog appears in which you enter e.g. "Drawing created".
Why does a question mark appear in the tag of control valves or instruments?
A question mark in the tag means that a component of the tag format has not yet been filled in. For instruments and control valves, this often includes a field such as Area. Right-click the object, choose Assign Tag and fill in all fields, including Area. Control valves receive an instrument annotation by default; you can later swap the valve body and actuator via "Change Body and Actuator".
Validation reports an open line end at a cap or arrow – how do I fix this?
Check the connection: a round grip at the end of the line means connected, a cross means open. To connect, right-click the line > Schematic Line Edit > Attach to Component. To solve it permanently, go to the class definitions: set end symbols such as caps or connection arrows as line end via "Edit Symbol", and place the connection point at the end of the symbol in the block. Use a separate class for this – settings on, say, the flow arrow apply to all child objects. Changes only take effect in open drawings.
How do I extend the equipment annotation with additional lines, e.g. comment fields?
1. Under Engineering Items > Equipment, add the fields under Properties (e.g., Comment2, Comment3, type String). 2. For the class (e.g., Tanks), select the multi-line annotation in the Annotation area and choose "Edit Block". 3. Click a line, use "Assign Format" to select the field under Class Properties and use target properties; create further lines by copying. 4. Close and save the block. Empty fields appear as a dot – a space as the default value makes them invisible.
How do I back up, name and structure tool palettes for my project?
Right-click the palette bar > Customize Palettes. To rename palettes, click twice slowly (e.g. with a standard-set abbreviation) so it is clear what belongs together. With right-click > Export, back up each palette individually as .xtp – strongly recommended before making changes. Create a new group in an empty white area; collapse all groups first, otherwise a subgroup is created. Create new palettes by right-clicking the tabs > New Palette and fill them by drag and drop. Related support question: “After exporting a tool palette again, folders like “Name (1)” appear and images are missing – what am I doing wrong?” Before exporting again, first delete the palette in AutoCAD and then the old export folder in Explorer. Otherwise the export creates “Name (1)” but still points to the first folder. Put the images in the palette folder. To pass them on, pack the parent folder including subfolders as a ZIP with the date in the name.
An interrupted P&ID line carries its designation on only one segment – how do I merge them?
Edit the line group, select “Add”, click the missing section, and confirm all prompts with Enter. The entire run then belongs to the same line.
Why is there a question mark after some tags – and why is it sometimes missing despite a duplicate number?
The question mark indicates an ambiguous (duplicate) or incomplete tag. It is appended only to the tag itself. If an annotation is built from individual fields instead of the tag, no question mark appears on the drawing even though the number is duplicated. Therefore always also check tags in the Data Manager and reassign faulty tags there or via right-click > Assign Tag.
How do I connect off-page connectors between two P&ID drawings?
Both drawings must be in the same project. Place an off-page connector at each line end. Only connectors whose line already has a line number are offered for connecting. Therefore connect from the side without a number to the side with a number (context menu or plus grip on the connector > Connect). The line number and other values are then transferred, the connector is shown as connected and you can jump directly to the other side.
When does a newly drawn line get a new line number and when not?
If you start in empty space, at a piece of equipment or at a line group breaker (e.g., a pump), a new pipe line group with its own number is created. If you continue drawing from an existing line or an inline valve, only a new segment of the same group is created. You can change the assignment afterwards: right-click the line to be kept > "Edit Line Group" > Add or Remove, and click the relevant sections.
An error message appears when creating a project on the network drive – what can I do?
Common causes are slow network or VPNVPN Virtual Private Network: encrypted connection over the internet into a company network, e.g. from a home office. Background and sources › connections, missing write permissions or cloud-synchronized folders. You can test write permissions by creating a new text file in the target folder. A proven workaround: 1. Create the project locally in a simple folder (e.g. C:\Projekte). 2. Close Plant 3D. 3. Cut (do not copy) the entire project folder in Explorer and paste it on the network drive. 4. In the Project Manager, use "Open" to select the project.xml in the new location.
Can I reuse existing AutoCAD 2D flow diagrams in P&ID?
The drawings can be taken over, but each element must be converted individually into a P&ID object. As a rule, redrawing in P&ID is faster.
The tool palette is marked red in Project Setup. How do I add the project palettes?
Red means that the project's palette group is missing. 1. Open a P&ID drawing. 2. Right-click the title bar of the tool palettes > "Customize Palettes". 3. In the right-hand area, right-click to create a new group and give it a meaningful name. 4. On the left, right-click "Import" to read in the palette files (.xtp) from the template folder one by one and drag them into the new group. 5. Right-click the group to set it as current. Via right-click on the palette > View Options you can set e.g. "Icon with text" for all palettes.
What does the yellow lightning bolt symbol next to a property value mean?
The value is acquired from another object via an acquisition rule, e.g., piping spec, fluid or nominal size from the pipe line group to segments and valves. The source is displayed, sometimes with an English name. Acquisition rules are defined in Project Setup. Note: rules set up later initially apply only to newly placed objects – so define piping specs and rules before the project starts whenever possible.
How can I rotate instrumentation and control (EMSR) symbols (general instruments) in the P&ID?
With the command GENERALINSTRUMENTROTATE, you define whether general instrument symbols may be rotated. After that, they can be rotated as usual.
When swapping symbols in the P&ID, the preview images are missing – what helps?
Close the drawing and delete the file SubstitutionPalettes.xml (back it up first). Then open the drawing and select an object – P&ID recreates the file, and the images appear again.
Why don't colors change after I edited a P&ID symbol, and may I drag it into the palette?
The lines of the original symbols usually have the color "ByBlock"; newly drawn lines get the current setting, often "ByLayer". Do not mix these, otherwise parts react differently to color changes. So do not delete the original line in the Block Editor; modify it instead. An edited block should not simply be dragged and dropped onto the tool palette: the tool then refers to the current drawing and no longer works after purging. New symbols belong in the class definitions via Project Setup.
Which checks should I run before generating lists from the P&ID?
1. Run AUDIT and PURGE in the drawing (including zero-length objects, unused blocks). 2. "Audit Project" in the Project Manager: checks the consistency of the project data and generates a log – only with no open, unsaved drawings, ideally right after a restart. 3. Validation (project, folder or single drawing): engineering check, e.g., open lines, size mismatches, unconnected off-page connectors.
How do I create a list as a PDF with the Report Creator?
Start the Report Creator from the Windows Start menu (Plant 3D program group, or search for "Report"). Under Project, open your project's Project.xml and select the required list under the report configuration, e.g. valve list or equipment list. Use Preview to check the result and Export to create the file. Besides PDF, formats such as Excel, CSVCSV – Comma-separated values Simple text file containing a table: one line per record, columns separated by a delimiter (in German Excel usually a semicolon). Background and sources › or RTFRTF Rich Text Format: text format with simple formatting that almost every word processor opens. Background and sources › are available; for print-ready lists, PDF is the most reliable. Under Settings, you define whether the report templates are stored in the project or in a central folder – this should be consistent across the team.
How do I define a uniform file name format for new P&ID drawings?
In the Project Manager, right-click the project name to open Project Setup and switch to Project Details. Under file name format, click Add and assemble the format from fields, e.g. project number, drawing type and drawing number. For each field you can specify whether it is numeric or a string and how long it may be. When a new drawing is created, the program then prompts for exactly these fields and builds the file name from them.
Can I open a P&ID or Plant 3D project of a newer version in an older version?
No. Projects are migrated when opened in a newer version and are no longer backward compatible afterward. Back up the project before migration and work on the team with the same version.
How do I create a filtered list, e.g. only pumps from one manufacturer, as a PDF report?
Start the Report Creator (e.g. type "Report" in the command line). For project-specific reports, copy the report templates from the Plant 3D program data folder to a reports folder in the project and point the Report Creator to the project. Then create a report based on a template (e.g. equipment list), select only pumps in the query, set a filter (field = value) and click "Test result". In the report layout, add or remove fields and adjust headings; output e.g. as PDF.
How do I export only specific columns from the Data Manager to Excel and bring changes back?
In Project Setup, under the data export/import settings, create a separate definition for the class (e.g. "Equipment Order") and select only the fields you need. In the Data Manager, right-click the class > Export and select this definition. Edit the Excel file and bring it back in via Import. As long as the internal ID column is preserved, the import is safe; alternatively, the tag can serve as the key – in which case tags must not be changed. The column order cannot be freely chosen here.
A project drawing has disappeared or been accidentally overwritten – how do I get an older version back?
You want to restore an earlier version of a drawing. If shadow copies are set up on the drive, you can do this directly in Windows Explorer. 1. Right-click the drawing or the project folder and select Properties > Previous Versions. 2. Select the appropriate version and first copy it to another location to check it. 3. Back up the current version before restoring the file itself; the file name remains unchanged. 4. Then check the drawing in the Project Manager. Advantage: you use existing backups instead of recreating the drawing. Your IT department can clarify whether previous versions are available.
My cloud project does not load – how do I check whether Autodesk is the cause?
At health.autodesk.com you can see the current status of the Autodesk cloud services.
When exporting my P&ID drawings to AutoCAD, end connections are missing – what am I doing wrong?
Export via Project Manager instead of with the single command EXPORTTOAUTOCADEXPORTTOAUTOCAD Command in AutoCAD Plant 3D and AutoCAD P&ID: saves a copy of the drawing in which the plant objects are converted into simple AutoCAD objects – readable without plant software. Background and sources ›. In the support case, all end connections were then present.
By what rule does P&ID break lines at crossings?
Each line class is assigned a priority. If the priorities differ, the line with the higher priority (smaller number, e.g. 1) runs through and the other is broken. If the priorities are equal, the vertical line is broken and the horizontal one runs through. The administrator defines the priority as well as the layer, color and lineweight of the line types in Project Setup under Class Definitions > Lines (e.g. Primary Line Segment). To change a primary line into a secondary line, right-click it and use Replace.
The off-page connector cannot be connected or does not show a drawing number. Why?
To connect, the arrow must be at the end of a line (do not use the line end symbol). Start "Connect To" on the side without a line number; the open arrows with a number are offered. A yellow exclamation mark means differing values: via "Show Connected" you accept them individually or with "Accept All". The drawing number displayed comes from the drawing properties: right-click the drawing in the Project Manager > Properties and enter the DWG number there.
After an Excel import, the annotation shows different values than the line. What happened?
Fields acquired from the line (e.g., the nominal size or piping spec of a valve) are dark gray in the Data Manager. If they are overwritten by an import, they appear light gray – the value is then considered manually changed and no longer follows the line. Validation then reports, e.g., a size or spec mismatch. Clarify which value is correct. If the line value should apply again, restore the acquisition rule for the field. The drawing audit then aligns the annotations in the drawing with the database.
What is the difference between specialty items and hand valves?
Specialty items behave like hand valves and receive their tag in the same way. In the bill of materials, however, they are listed separately and not grouped with the hand valves – use this deliberately for items that are to be listed separately.
When auditing the project, “Exception of type 'Autodesk.ProcessPower.DataLinks.DLException' was thrown” appears – what can I do?
The message comes from Plant 3D's database access. Most common cause: the project is still open on another workstation – often followed by the message that the project is opened by another user. 1. Find out where the project is open and close Plant 3D there completely (closing the drawings alone is not enough). 2. Run the audit again. 3. If the message persists although nobody is working in the project: look for .dwl or .dwl2 files in the project folder – they show on which computer a drawing is still open or Plant 3D has crashed. Start Plant 3D there and exit it normally; do not delete the files by hand. 4. For projects on SQLSQL – Structured Query Language Query language for databases. “SQL Server” is Microsoft's database system; AutoCAD Plant 3D can store its project data there instead of in SQLite files. Background and sources › Server, also check the connection to the server.
Validation reports "unconnected component" for a vessel even though lines are connected.
Some symbols contain predefined connection points at which validation expects a connection. Right-click the object and choose Edit P&ID Object's Block to see where these points are. Connect the lines exactly there. For vessels, fixed connection points usually make little sense; you can delete them in the Block Editor and save the block. Then refresh the parent level of the message in the validation summary, and it disappears.
How do I mark a scope-of-supply boundary in the P&ID and enter the suppliers on the left and right?
Place a scope boundary symbol (segment break) directly on the line – it splits the line into two segments, and the line group is preserved. Then select the left segment and enter the supplier in the Properties palette, and do the same for the right segment. Note: Do not move the symbol along the line, otherwise the segments will not be merged again. Instead, remove it (delete or Ctrl+Z) and place it again. Related support question: “How do I mark a scope boundary in the P&ID, enter the suppliers on the left and right, and mirror the symbol?” Place the scope boundary symbol (segment break) on the line; it splits the line into two segments, and the line group is retained. Then enter the supplier in the properties of each segment. To mirror it, enable “Mirror on insert” in the class definition of the segment break; the symbol is mirrored when you place it next to the line, after which you slide it onto the line. Do not move the symbol along the line – undo it with Ctrl+Z or drag it off the line.
How do I select only the actuator of a control valve, e.g. for the fail-safe position?
Control valves consist of a group (valve body and actuator). The PICKSTYLEPICKSTYLE AutoCAD system variable: determines whether groups are selected as a whole (1) or as individual objects (0). Other values concern hatches. Background and sources › system variable toggles group selection: 0 = individual objects selectable, 1 = group. Set PICKSTYLE to 0, click the actuator and set e.g. the fail-safe position in the Properties window. Swap the actuator or valve type by right-clicking and using "Edit Control Valve" or "Replace". Afterwards set PICKSTYLE back to 1.
Why do my valves with actuators appear in the Data Manager under instruments instead of under hand valves?
This is standard behavior: as soon as an actuator is assigned to a valve, it is treated as a control valve and listed under instrumentation, because it needs I&C properties there. Only valves without an actuator appear as hand valves. Once an actuator assignment has been made, it cannot simply be undone. If you want to list actuated valves under hand valves, you must create custom symbols with an integrated actuator in the hand valve class – so define the rule before the project starts.
I cannot assign a tag number even though it is not used anywhere. What helps?
Usually a database entry of a deleted object still exists. Save and close all drawings of the project. Then, in the Project Manager, right-click the project name and select Validate Project. The function compares drawings and database and removes orphaned entries; you can see the log with F2F2 Function key in AutoCAD: shows and hides the extended text window with the command history – where, e.g., audit reports appear. Background and sources › in the text window or in the log file. If the dialog is marked red or reports unsaved data, restart the program without opening a drawing first. After that, the number can usually be assigned again. Related support question: “A tag cannot be assigned, but the project validation finds no error – what is the next step?” Create a new project based on the existing one (Create project from existing) and copy the drawings into it using “Copy drawing to project”. When opening, the database entries are rebuilt; in the support case, the tag could be assigned again afterward. Create a project backup beforehand.
What does the validation message mean that an annotation is too far from the object?
Validation checks whether annotations are within a defined distance of the associated object so that they can be assigned unambiguously. Often, after a line is split, e.g., by a reducer, the annotation still belongs to another segment. Check via the object which values the annotation shows. If it belongs to the wrong segment, delete it and place it again: right-click the line > Annotate > Line Tag. If it is merely too far away, move it closer and refresh the validation.
The Excel import into the Data Manager aborts with errors – what should I watch out for?
Check the list for special characters; in the support case, a hyphen caused the error. Contents that are too long are truncated to the maximum length and appear yellow again on every import.
How do I adopt the settings from a project template when creating a new project – and why can't a drawing be copied into my new project?
In the Project Manager, select New Project. On the first page of the wizard, enter the name and location and activate "Copy settings from existing project". Use the three dots to select the Project.xml of the template project. Click through the remaining pages with Next, as units, symbol standard etc. come from the template. On the last page, check "Edit additional project settings after creating project" – if Project Setup then opens, the project has been created completely. If an existing drawing cannot be transferred via "Copy Drawing to Project", check the base unit (metric or imperial) of both projects – it is defined when the project is created. In that case, create the target project based on the source project and copy the drawing again.
What is the difference between pipe line group and line segment?
The line group is a database entry that combines a pipe line number from a unique start to a unique end. Properties such as line number and fluid are stored in the group. Line segments are the drawn sections of this group; a new segment is created wherever a parameter changes, e.g., at a reducer. Valves or flanges do not split the line. In the Data Manager, you will find both listed separately under the lines and can check there whether every segment is correctly assigned.
Can you use P&IDs from another Plant project in the 3D model?
Not directly: there is no data exchange between separate projects – the P&ID line list, data transfer and validation work only within one project. You still want to use the P&IDs? Bring the drawings into your project in Project Manager via right-click on “P&ID Drawings” → “Copy Drawing to Project…”. So that classes, tags and piping specs match, the target project should have the same configuration, e.g. because it was created with “Copy settings from existing project”.
Why does my new line get the same number as an existing one, and how do I separate them?
If you start a line at an existing line, it becomes part of the same line group and takes over its number. If you start in empty space or at a piece of equipment, a new group is created. If a branch, e.g., a bypass, should get its own number, right-click the existing line, choose Edit Line Group > Remove, select the section and confirm with Enter. Use Add to combine sections again. Caution: when changing the group, group properties such as the fluid are lost and must be reassigned.
A transfer rule returns the wrong value for individual objects even though it looks correct – what helps?
Remove the acquisition (not the property) at the lower level, close the project configuration and open it again. Repeat this until no foreign acquisition is displayed any more, and then set up the acquisition rule cleanly again at the higher level.
Can I build an additional tag, e.g. a customer tag, from several fields?
Yes, with a calculated property. Under Properties, select “Add”, choose the type “Calculated”, and in the expression editor combine the desired properties using the “Concatenate” operator; place separators in quotation marks between them (e.g. "-"). Optionally set it to read-only. The value is generated automatically without your having to update. Created at the “Engineering Items” level, it is available for all objects in lists – so you can keep your own tag and the customer tag separate. Related support question: “How do I combine several properties (e.g. nominal size, piping spec, medium) in one field for the isometric?” Use the command PLANTDEFINECALCPROPERTIESPLANTDEFINECALCPROPERTIES AutoCAD Plant 3D command: creates calculated properties whose value is composed of other properties, e.g. nominal size, piping spec and fluid in one field. Background and sources › to create a new property (string) and insert the properties by double-clicking; between them use the concatenation symbol “||” with separators in single quotes: Property1 || '-' || Property2. Enter the new property in the Iso.atr and place it in the Iso.dwt.
Why do nozzles or other P&ID objects show question marks in the tag or in the Data Manager?
You want complete tags instead of question marks. A tag is formed from the properties stored in the tag format of the class; if one of them has no value, a question mark appears at that position. 1. Select the object and check in the Properties palette the properties used by the tag format; add missing values. 2. In Project Setup under P&ID DWG Settings > P&ID Class Definitions, check for the class (e.g. Nozzle) under "Tag Format" which format is assigned and which properties it uses. Back up the project before making changes. 3. Alternatively, fill in empty fields in the Data Manager. 4. Then update the tag. Advantage: unambiguous, complete identifications in the drawing and lists.
I scaled P&ID symbols by hand – after opening the project configuration they are back to their old size. Why?
The project configuration determines the size and appearance of symbols and annotations. Set the desired fixed size in the project configuration, and all P&ID elements will be inserted at the correct size.
How do I prevent a value from continuing to be acquired automatically from the pipe line by valves?
You want a property to no longer be acquired automatically from another object. To do this, remove the acquisition rule. Back up the project first. 1. In the Project Manager, open Project Setup. 2. Expand P&ID DWG Settings > P&ID Class Definitions and select the class, e.g. the relevant valve class. 3. Under Properties, in the Acquisition column, click in the field of the property and then on [...]. 4. Select "Remove Acquisition Rule" and close Project Setup with OK. Advantage: you control yourself which values are passed on. Use the same button to add or edit rules.
How do I prevent empty properties (e.g. Supplier) from appearing as dots on the symbol?
In Project Setup, under P&ID DWG Settings > Class Definitions > Engineering Items, enter a space as the default value for the property in question (e.g. Supplier). This applies to all newly drawn objects; the annotation then stays invisible. For existing objects, add the space in the corresponding column via the Data Manager. A space also has the advantage that you can filter for it specifically in bills of materials. Related support question: “Only a dot appears in the annotation of my control valve – why?” A dot stands for a queried property without content – often the annotation queries a property of a manual valve. In the project configuration, open the control valve annotation with “Edit Block” and delete or replace the attribute with the appropriate control valve property. A symbol list property does not work for control valves; create a separate list for this.
How do I specify a uniform file name format with a selection list for new drawings?
In Project Setup under General Settings > File Name Format, you define the components, e.g. project number – drawing type – drawing number. You can enter a fixed project number directly as a separator (adjust it when copying the project!). For a selection list, first create a new list under P&ID Class Definitions > Pipe Line Group on a list field via "Edit List", without assigning it to the field. Then select this list as the field type in the file name format. If it does not appear immediately, close Project Setup and reopen it.
When routing in the 3D model, the line numbers from the P&ID are not offered – what do I need to check in the tag format?
You want to work with the line numbers from the P&ID in the 3D model: Plant 3D only displays them if the tag format of the P&ID line group matches the tag format of the Plant 3D line group; otherwise a message about an inconsistent tag format appears. 1. Back up the project first. 2. Project Setup > P&ID DWG Settings > P&ID Class Definitions > Line Group: view the tag format of the line number. 3. In the Plant 3D Class Definitions, structure the tag format of the line group (P3dLineGroup) identically. 4. Test the transfer. P&ID and 3D line numbers remain separate values; you find deviations via validation. Advantage: line numbers are transferred without retyping.
When is the SQLite database sufficient and when do I need SQL Server?
The option "Single user – local SQLiteSQLite Database in a single file, without its own server. AutoCAD Plant 3D stores project data this way by default. Background and sources › database" stores the database as a file in the project folder. It is suitable for projects where one or two people work at the same time; the project can be moved as a whole and is backed up with the folder's normal data backup. If several people regularly work in the same project at the same time, a multi-user database on SQL Server (e.g., SQL Server Express) should be used. It must be set up by the administrator and backed up separately, and all users need access to the server.
The line number from the P&ID is displayed differently in the 3D model or is not transferred – what is the reason?
You want to transfer line numbers unchanged from the P&ID to the 3D model. Tags are only considered identical if their values match exactly – even an additional space in the delimiter creates a mismatch. 1. Back up the project first. 2. In Project Setup, open the tag format of the line group in P&ID and in Plant 3D (Class Settings > Tag Format). 3. Compare the number and order of the parts as well as the delimiters. Enter delimiters only in the "Delimiter" field between the parts, not within a part. 4. Under Plant 3D DWG Settings > P&ID Object Mapping, check whether all tag components are mapped. This way the line numbers in the P&ID and the 3D model match.
In which files does the project configuration store its settings?
In the project folder: misc.dcf (general settings), ProcessPower.dcf (P&ID), Piping.dcf (Plant 3D), Ortho.dcf, and Iso.dcf. In addition there are IsoConfig.xml and IsoSkeyAcadBlockMap.xml. By replacing, for example, Piping.dcf, an area can be transferred to another project or reset to the default.
A cloud project (Plant 3D Collaboration) reports errors when opening and saving – what helps?
Create a backup of the cloud project, create a new project from it, copy all drawings into it, and upload the project to the cloud again. Make sure that Plant 3D and Desktop Connector or Collaboration are the same version.
How do I turn a pick list into a shared list for P&ID and 3D in AutoCAD Plant 3D 2027 – and back again?
You want to maintain a pick list in only one place: since version 2026 there are shared pick lists that apply to P&ID and 3D classes. If you change the list in one place, it is also changed in the other. Since version 2027 an existing list can be converted. How to proceed: 1. Back up the project. 2. In Project Setup open the “Selection List Property” dialog box of the list. The Autodesk Help lists it under the properties of the root node “P&ID Class Definitions”. 3. Click “Change List Type”. A non-shared list becomes a shared list for P&ID and 3D classes, a shared one becomes non-shared again. The message depends on the current state of the list. 4. If P&ID and 3D already each have a list with the same name, rename one of them or merge both into one shared list. 5. If you work with several projects, align the shared lists in the “Project Compare” dialog box: the “List Settings” table shows the state of each list. There you check the changes from the reference project, accept them and apply them to your project. Your advantage: P&ID and 3D use the same entries, double maintenance is no longer needed. Background: wish from the Idea Station, idea 13966731 (6 votes, as of 07.11.2026). Source: Autodesk Help, What’s New in AutoCAD Plant 3D 2026 (“Project Enhancements”) and 2027 (“Project Management”). Next step: if your project behaves differently than described, write to support@seitz-ingenieure.de – we will look at it together via remote session.
Can I use a transfer rule to copy a value to a different property within the same object?
No. A transfer rule always acts between a line and an object. For combinations within one object, use a calculated property (PLANTDEFINECALCPROPERTIES).
Can I maintain selection lists, e.g. the piping spec or fluid list, via Excel?
Yes. In the P&ID class definitions, open "Edit List" for the field (e.g. in the pipe line group) and export the selected list to Excel. Edit the file, save it and import it at the same place – select "update existing list", not "new list", otherwise a second list is created. Important: the import only adds; rows deleted in Excel are kept and duplicate values are ignored. Afterwards, check the field's default value and set it to the empty entry, otherwise all objects automatically receive a value.
Symbols that I know from another project are missing in my new project – what is the reason?
You want to work with the familiar symbols in the new project. Symbols and classes come from the Project Setup of the project whose settings were copied when the project was created. 1. Check from which template project the project was created and whether the symbols are present there. 2. If they are missing there, create the project again and, in the wizard, activate "Copy settings from existing project" with the correct template project. 3. Transfer drawings that have already been created in the Project Manager by right-clicking the drawing node > "Copy Drawing to Project". Advantage: the new project receives all customized settings of the template project and is compatible with it.
My acquisition rule does not transfer the medium – what is the reason?
Source and target must have the same property type. Nothing is transferred from a selection list to a string (or vice versa). Create both properties identically and then run PLANTREFRESHACQPROPERTY.
At which level do I create custom property fields, and what do I need to watch out for?
As high up as possible, ideally under Engineering Items: fields created there are inherited by all subclasses and appear e.g. in the export of all equipment. Fields on a single class only (say, tanks only) are missing from the export of the parent level. Give the internal property name in English and without spaces or special characters; the display name may be in German. Choose the type (string, numeric, yes/no, selection list, symbol list, acquisition, calculated) carefully – it cannot be changed later.
Do I need separate classes for a symbol in several variants (e.g. labeled left/right)?
No. Store several symbols in the same class. First save the symbol block under a new name in the same folder, and only then change the label or rotation – otherwise you overwrite the original. After inserting, choose the desired variant in the properties under Style > Graphic Style.
Do manual valves, control valves and instrumentation (EMSR) objects need the same tag format?
Compare the tag formats of hand valves, control valves and instrumentation objects: different numbers of digits (e.g. three and five digits) and slightly different formats are possible but should be chosen deliberately so that tags remain consistent.
New P&ID drawings have the wrong layout or no title block. What is the cause?
You want new P&ID drawings to be created with the correct template (DWT). 1. In Project Setup under Paths, check the P&ID drawing template file: copy the path and check in Windows Explorer whether the DWT is located there; select the correct template if necessary. 2. Also check the drawing folder: each folder in the Project Manager can have its own template (DWG Creation Template For Folder) or prompt for one with every new drawing (Prompt For Template). This is defined when the folder is created. 3. Only create folders in the template project once the DWT is in its final location (e.g. server). 4. In the New Drawing dialog you can see at the bottom which template is used. Remove incorrectly created drawings by right-clicking "Remove Drawing from Project" and create them again. Advantage: consistent layouts and title blocks throughout the project.
The project behaves incorrectly after changes to the configuration – what can I do?
1. If an error message appears in Project Setup: close Plant 3D immediately and restart it; do not keep working. 2. Start Plant 3D without a drawing open, right-click the project in the Project Manager > Validate Project and check the log file – any errors found are repaired in the process. 3. In individual drawings, the AutoCAD commands AUDIT and PURGE help. 4. If the problem persists, create a new project based on the faulty one and copy the drawings into it. Related support question: “When saving, Plant 3D reports ‘Database disk image is malformed’ – what should I do?” The project database is corrupted. Create a new project based on the existing one (Create project from existing) and bring over the drawings with “Copy drawing to project”. To rule out the server as the cause, the project can be run locally for a while as a test. Related support question: “During migration to SQL Server, not all drawings are transferred – what can I do?” Check the affected drawings with AUDIT, PURGE and PLANTAUDITPLANTAUDIT Command in AutoCAD Plant 3D and AutoCAD P&ID: checks the drawing against the project database and fixes errors in the synchronisation between the two. Background and sources ›. If that does not help, the safe approach is to create the project anew in SQL Server and bring over the drawings with “Copy drawing to project”. Create a project backup beforehand.
New lines immediately get a piping spec and a fluid – how do I prevent this?
In the template project, check the default values for piping spec and service of the piping group and set them to empty. Otherwise every new line is initially placed with this value.
How do I keep auxiliary lines, e.g. inside a valve block, out of my lists?
Create a separate piping type for these lines in the project configuration. The P&ID functions remain usable; in lists and reports, filter this type out.
How do I make valve numbering start at 01 again for each line?
Include the line number as part of the tag format of the manual valves. Since the tag is then unique per line, numbering can start with 01 again for each line.
How do I make a new piping spec selectable for pipe lines in the P&ID?
In the Project Manager, open Project Setup > P&ID DWG Settings > P&ID Class Definitions and select the pipe line group. There, edit the selection list of the piping spec property (NominalSpec) and add the name of the new piping spec via Add Row. For the link to the 3D model to work, the name must match the piping spec name exactly, and the piping spec must also be copied into the project via the Project Manager.
My custom pipe colors by medium are suddenly gone – why?
If the color settings in Project Setup are changed, custom color assignments (e.g. by medium) are lost.
After moving to SQL Server, my project properties are sorted alphabetically – can I change that?
No. When the configuration files (DCFDCF Project database file of AutoCAD Plant 3D and AutoCAD P&ID, e.g. ProcessPower.dcf (P&ID) and Piping.dcf (3D piping). It contains the project configuration and, in SQLite projects, also the project data. Background and sources ›) are loaded into SQL Server, the properties are sorted alphabetically; this cannot be prevented.
How do I change the number of digits of a tag component (e.g. from 3 to 2 digits) in a running project?
In the tag format, set the expression to the new fixed length. In the drawings, run PLANTREFRESHACQPROPERTIES, export the line groups to Excel in the Data Manager, adjust the values, and import them again. Create a project backup beforehand.
Why can't I create a tag format for a fitting?
The Fittings class does not include a tag by default. The easiest way is to create an element that needs a tag under Hand Valves or Specialty Items. If it is to remain a fitting, create the properties Number, Type and Tag under Piping Fittings and assign a tag format.
I set up an acquisition rule, but existing objects do not show the value. What can I do?
Acquisition rules only apply to objects that are drawn or connected after they have been set up. To apply them to existing objects, enter PLANTREFRESHACQUIREDPROPERTIES on the command line (it can be found via autocomplete, e.g. with "REFRESH") and choose whether the current drawing or the whole project should be updated. All acquired fields are then filled again. Check the result in the Data Manager, e.g. in a custom view that you create under Project Setup > Data Manager.
Why does a vessel prompt for scaling but a pump for the rotation angle?
Each symbol class has its own insertion behavior: whether it is scaled, rotated or mirrored and whether a tag is prompted for. This is stored per project in Project Setup under P&ID DWG Settings > Class Definitions. Select the class there (e.g. Equipment > Filters), click Edit Symbol and set the insertion behavior you want. Since the configuration is stored in the project, you should use a customized project as the template for new projects. Changes to the configuration are the CADCAD – Computer-Aided Design Computer-aided design and drafting. Background and sources › administrator's job.
Why does Plant 3D not transfer the insulation thickness from the P&ID for lines that already exist in the 3D model?
The transfer from P&ID to Plant 3D only takes effect when the line is drawn. If the line already exists in 3D, nothing is added afterward. Export the line group in the P&ID and import it into Plant 3D with the appropriate import setting in the project configuration. First check whether the insulation thickness is set up for transfer in the configuration.
How do I move properties with the same name from the subclasses to the Engineering Items level?
If properties with the same name are to be moved from the subclasses up to the Engineering Items level, work in a new project based on the existing one: note the acquisition rules, delete the properties in the subclasses (note the spelling), do not click Modify in the tag format, create the properties with the same names under Engineering Items and set the acquisitions again. Then copy the drawings into the new project and update the acquisitions with PLANTREFRESHACQPROPERTY.
How do I define a title block that fills itself automatically from project and drawing data?
In the P&ID class definitions, create a class "Title Block" under Non-Engineering Items > Annotation and add a title block via "Add Symbol" (no tag, no scaling). In the block, use "Assign Format" to assign project details and drawing properties, or use AutoCAD fields (e.g. date, file name). Advantage over a title block in the DWT: changes to the block are updated in all project drawings. Create your own project details in Project Setup beforehand. The same title block can also be transferred to the DWT of the ortho drawings.
Can a symbol change depending on a property, e.g. an actuator with a fail-safe position?
Yes, with a field of type "Symbol List". 1. Open the actuator block with "Edit Block", adapt it for each variant and save it under a new name with "Save Block As" (it is stored in ProjectSymbolStyle.dwg). 2. In the class, add the variants from this file with "Add Symbol". 3. Create a symbol list field and assign the matching symbol to each value. In the drawing, you then change the value in the properties. Valve and actuator form a group – with PICKSTYLE 0 you can select the actuator on its own.
Why is a symbol I created in one project not available in other projects?
Symbols and classes always belong to the respective project: the blocks are stored in its ProjectSymbolStyle.dwg, and palettes refer to this file of the current project. For other projects, use the project comparison in Project Setup: select the source project (it must be closed), transfer the blocks first, then the classes and properties, and synchronize. Symbols from other standard sets (e.g. DIN instead of ISO) often have different base sizes and are only partially compatible. Ideally: finish the configuration before projects start.
Empty drawing properties show #### in the title block or revision table – how do I keep the fields empty?
You want clean, empty fields in the title block: In Project Setup, under General Settings > Drawing Properties, enter a single space as the value in the relevant row, and confirm with Apply and OK. In existing drawings, add the space once via Project Manager > right-click the drawing > Properties…; then REGEN. The system variable FIELDDISPLAYFIELDDISPLAY AutoCAD system variable: determines whether fields are shown with a grey background (1) or without (0). The background is never plotted. Background and sources › only hides the gray field background, not the ####.
Sight glasses and similar parts get no tag in the P&ID – how do I change that?
Create such parts in Project Setup under the manual valves (or as a fitting with a tag format). They then receive a tag and appear in the Data Manager and in lists. The class of an existing object does not change if only the block is changed.
How do I restore the original tool palette if it has been overwritten?
Right-click the title bar of the palette and choose Customize Palettes. In the empty white area on the right, right-click to create a new group, e.g. “P&ID ISO Original”. Drag any palette into it and set the group as current by right-clicking. Then, on the left, right-click > Import and import the saved palette files (.xtp) one by one, dragging them into the new group. Afterward, remove the helper palette; change the order by drag and drop. Exporting works the other way around. Related support question: “How do I distribute uniform tool palettes to all workstations?” On the source computer, export the palette group and the palettes (.xtp) under “Customize Palettes” – the image folders of the same name belong with them. On the target computer, first import the palette group, then import a palette and drag it into the group, activate the group, and import the remaining palettes. If icon images are missing, the image folders are not located next to the .xtp files or access rights are missing. Then restart the program.
Why can’t I pass the drawing number on to the line group?
A line group can run across several drawings, so there is no unique drawing number. Instead, create the property on the pipe (line component) or segment and transfer the drawing number there.
When creating a project from the template, a message says the project does not exist – what should I do?
If creating a project from a template reports that the project does not exist and only a few files are created in the project folder, individual P&ID classes or database entries of the template are usually damaged or duplicated. You can narrow this down with the project comparison: first transfer everything except the P&ID classes into a new project, create a test project from it, and then continue comparing group by group. Delete the class you find and purge the block.
Why does a reducer divide the line into segments, but another part does not?
The behavior is defined per symbol in Project Setup (class definition > Edit Symbol). Types include: Inline (sits in the line), Endline (e.g., vessel), Segment Breaker (e.g., reducer – new segment with its own nominal size or piping spec), Line Group Breaker (e.g., pump – new line number) and no connection (annotations). If a component is classified incorrectly, the administrator corrects this; it applies to newly inserted objects.
How do I turn my tested template project into a clean template?
Once you have customized and tested the template project, create a new, clean project from it without test drawings and use that as your template.
How do I compose the line number from drawing properties and a sequential number?
1. Create the values (e.g., plant system, section number) as drawing properties. 2. In the pipe line group, create fields with the same names and the default value "Acquisition" from the drawing properties ("Acquisition" follows later changes, "Initial" writes only once). 3. In the group's tag format, use "Modify" to add the fields and, for each field, choose e.g. a fixed-length number under "Define Expression". 4. Update the tag format of the pipe line segments and annotation blocks in the same way.
How do I increment tags automatically, e.g. pumps from 500 in steps of five?
In the class's tag format, choose “Define Expression” on the number field and create a counter at project or drawing level; set the start value and increment there. A counter on the parent tag format applies to all subclasses – pumps, vessels, etc. would then be numbered up together. For separate number ranges, each object type needs its own tag format with its own counter. Because drawings are rarely created in numerical order, many users assign the numbers afterward by exporting from the Data Manager to Excel and reimporting. Related support question: “How do I set up area-based numbering with automatic counting up?” In Project Setup, open the tag format via “Modify”, increase the number of parts, and choose the property fields. For the line group, clear “Use target properties”. Add missing fields via “Add” (without special characters or spaces). Define the counting up via “Define Expression”, close with OK, and run PLANTREFRESHACQPROPERTY; add missing values in the Data Manager.
How do I keep the option of changing the tag system later?
Set the tag format to the ISO system (type number) and make unneeded properties invisible instead of deleting them. This lets you switch quickly to a different tag system later.
How do I set up my own drawing template (DWT) for P&ID projects?
1. Under Options (right-click in the command line > Options), on the Profiles tab, copy the current profile, rename it and set it current. 2. Under Files > Template Settings, set the template path to a central server folder. 3. Copy the original Plant 3D DWT there, open it and adapt it. 4. In Project Setup, assign the new template under the P&ID DWG Settings. Important: never save a drawing assigned to a project as a DWT – it carries a project ID and causes errors.
I set up a new title block, but new drawings still show the old one – why?
The drawing template (DWT) probably still contains the old block definition, which cannot be purged. Create a new, clean DWT with the new title block and register it in Project Manager or in Project Setup.
A property from the project details has the same value throughout the project – how do I allow different values?
If a property (e.g. the first level of the plant identification) is filled from the project details via an acquisition rule, one value applies throughout the project. If different values are to occur in a project, remove the acquisition rule in the class properties.
The tag of my valves does not arrive from the P&ID in the 3D model – what do I check?
You want to place valves with their P&ID tag in the 3D model. Values are only transferred if the properties are mapped and the tag formats match. 1. Back up the project first. 2. Open Project Setup > Plant 3D DWG Settings > P&ID Object Mapping and check for the valve class which P&ID properties are mapped to which Plant 3D properties. 3. Map every property that occurs in the P&ID tag format – if a mapping is missing, the Plant 3D tag shows a question mark. 4. Compare the tag formats (parts, order, delimiters) in the class settings of P&ID and Plant 3D and align them. This way the tags match, and the synchronization between P&ID and 3D model works.
How does a nozzle automatically acquire the tag of the equipment and of the connected line?
For nozzles, add two fields under Properties (e.g., EquipmentTag, LineTag), default value "Acquisition", source Equipment > Tag or Pipe Line Segments > Line Tag. The segment first acquires its value from the tag of the pipe line group – use the tag, not the line number. New objects receive the values automatically. For existing objects, enter REFRESH in the command line, choose the command to update acquired properties and specify the drawing or project.
Why doesn't automatic valve numbering count back after deletion?
This is intentional: with automatic numbering, a number once assigned is not reused, so that it does not later turn up for a different component in a list that has already been passed on. The counter is maintained in Project Setup in the tag format of the respective class via a project field. An administrator can reset it; numbers already assigned are then skipped until a free one is found. Resetting should only be done deliberately and by agreement.
When creating a drawing, "Value cannot be more than … characters" appears – what can I do?
The message comes from the file name format in Project Setup (Project Details). A maximum length or the type "numeric" is defined there for the field in question. Open the file name format, select the field and adjust the length or type (String instead of numeric); accept with Apply and OK. If the program does not accept the change, it helps to switch the type once, apply, and switch it back. If the behavior persists, check whether the current update for your program version is installed.
I changed the tag format of the line group in an ongoing project – are existing tags adjusted automatically?
No. Existing line groups must be reconfirmed via the Data Manager. Therefore, define the tag format before the start of the project if possible, and use only properties of the line group itself in the line group's tag format.
Layers that I defined for symbols in the project configuration are missing in new drawings – why?
You want new P&ID drawings to contain all project layers right away. Layers and layer colors of new drawings come from the drawing template (DWT) used by the project. 1. In Project Setup, check which P&ID drawing template is specified. 2. Open this DWT itself (not a project drawing), create the required layers with colors and save the template. 3. Create new drawings in the Project Manager via the P&ID drawings node – they are then based on this template. Note: for some classes, the symbol settings override the layer color. This way all new drawings start with a consistent set of layers.
I cannot assign a tag to a strainer in Plant 3D – why?
The strainer class has no tag format. Workaround from support: fill the tag column via Excel import.
An inherited property appears in the subclass as a string instead of a selection list – how do I correct this?
If a property of the parent class appears in a subclass as a string instead of a selection list, the type cannot be changed in the project configuration, only directly in the project database. We will be happy to make this change together with you in a support session – with a project backup beforehand and a check afterwards.
How do I customize an annotation, e.g. on reducers, without changing the original?
In the class (e.g. Inline Assets > Reducer), select the template in the Annotation section and click "Add Annotation": Plant 3D copies the block under a new name. Modify it with "Edit Block" and adjust the fields with "Assign Format". To make the class use it by default, change the Annotation Style at the very bottom of the properties. If you want to be prompted for the position when placing it, select automatic insertion with prompt under "Edit Annotation". Re-place existing annotations.
I cannot replace a valve in the P&ID nominal size and piping spec are grayed out – why?
You want to change values of a valve that are filled via an acquisition rule, e.g. nominal size or piping spec from the line segment or line group. Acquired properties can only be changed once you switch them to override mode in the Properties palette or in the Data Manager. 1. Back up the project before changing the configuration. 2. Open Project Setup > P&ID DWG Settings > P&ID Class Definitions and select the valve class. 3. Under Properties, check the "Acquisition" column: use [...] to add, edit or remove rules. 4. Remove superfluous rules so that each value comes from only one source. This keeps acquisitions unambiguous, and valves can be replaced again.
How do I turn my own AutoCAD block into an intelligent P&ID symbol?
1. Create a block with BLOCKBLOCK AutoCAD command: combines objects under a name with a base point into a block definition that can be inserted as often as required. Background and sources › (objects on layer 0, properties ByBlock, sensible base point) and save the drawing. 2. In the P&ID class definitions, select the appropriate class or create one via right-click > New. 3. Choose "Add Symbols", use [...] to select the drawing containing the block and then the block. 4. Define the layer, scale, rotate/mirror, tag prompt, connection type (equipment: Endline) and automatic nozzle. 5. Choose "Add to Tool Palette". Modifying a similar existing block saves work and keeps the proportions right.
Piping specs & catalogs (90)
Does it matter whether I create a new component as an instrument, valve or fitting?
Yes. The component type determines the insertion behavior when drawing and the group in which the component appears in bills of materials and isometrics. A measuring device should therefore be created as an instrument, and a connecting piece as a fitting. Define the type, graphics and end types right at the start, because if you change them later, values already entered must be re-entered. Components for vessel nozzles belong in the nozzle catalog, all others in the pipe, valve or instrument catalogs.
How can I quickly see which components and nominal sizes a spec contains?
Right-click the spec in the Project Manager > "Spec Viewer". At the top, only the smallest and largest nominal size is shown for each component type – you cannot see there whether sizes in between are missing. Select a component: the lower area lists every size actually contained individually. The viewer also shows when several components are assigned to one nominal size.
Which specs in the project must I not delete?
Always keep the system specs supplied with the software: Custom Parts (for user-defined components, e.g. via the tool palette), Instrumentation (instruments), Pipe Support (pipe supports) and Placeholder (placeholders, in case a component is not found in a spec). Functions and tool palettes access these directly. You can remove supplied sample specs that you don't use. To add your own specs, right-click "Pipe Specs" in the Project Manager > "Copy Spec to Project".
How do I get a new spec into my Plant 3D project?
In the Project Manager, right-click the Pipe Specs node and choose Copy Spec to Project. Select the file with the .pspx extension from your spec folder. Plant 3D copies the .pspx file and the associated .pspc file to the project's Spec Sheets folder. The spec is then available for selection when drawing; you may need to restart Plant 3D once.
When I add a component to the spec, an exclamation mark appears. What does that mean?
Usually a change to the current component in the catalog has not been saved yet. Read the message carefully: save the changes to the component (do not cancel or discard), after which the component can be added to the spec. Save the spec regularly as you work, e.g. before editing the branch table – otherwise some new components may not appear there.
Which files belong to a catalog and to a spec?
A catalog is a .pcat file; next to it is a folder of the same name with preview images and, if applicable, a DWG subfolder for block-based parts – the two must always stay together. A spec consists of two files: .pspx (a ZIP containing XML, including a reference to the catalogs used) and .pspc (contains a copy of all catalog data used). You always work in the catalog; the spec is assembled from it. Tip: In Windows Explorer, under “View”, show the file name extensions. Related support question: “A part reports faulty catalog data – how do I proceed?” Add the missing data in the part's catalog and then update the catalog data in Spec Editor. Maintain catalogs only via the central location in Spec Editor, never move them in Explorer. Which catalogs a spec uses is stored in the .pspc (column CatalogId, readable with an SQLite program).
An instrument is specified in inches on the data sheet – which nominal size do I enter in the catalog?
Assign the inch value to the nominal size via an inch ↔ DNDN – Nominal size (DN) Designation for the size of pipes, fittings and valves (Diameter Nominal). It is roughly the inside diameter in millimeters but is not an exact dimension. Background and sources › mapping table, e.g. ½″ = DN 15, and create the part in the catalog with this DN.
Why does Plant 3D insert an eccentric reducer when changing nominal size, or fail to find a route?
If the spec contains both concentric and eccentric reducers, the program uses the component with priority 1. If the eccentric reducer is at the top, routing often cannot resolve the resulting elevation offset. In the part priority for reducers, therefore always put the concentric version first. You can specifically select the eccentric reducer when needed while drawing via Substitute Part.
On import, the Spec Editor reports that the Excel file is not an exported file – what's wrong?
First check whether the Excel file is still open, and close it. Another common cause is importing in the wrong place: a file exported in the Catalog Editor must also be imported there; a spec export file correspondingly in the Spec Editor. Also make sure that in Excel you only changed values and did not rename any columns or worksheets.
How do I avoid constantly copying the piping spec back and forth between library and project?
You can open the piping spec in the Spec Editor directly from the project's Spec Sheets folder and edit it there. Close all other open piping specs first so that you do not accidentally work in the wrong file – the storage location is shown in the title bar at the top. Regularly save the current version back to your library and, if in doubt, compare the modification date so that two editing states do not overwrite each other.
Why does Plant 3D only insert a placeholder with a yellow exclamation mark at a connection instead of the component?
The placeholder appears when a connection is defined but no matching component is found. Check: 1. Is the connecting part included in the piping spec? 2. Do the end types of the connections in the catalog match? 3. Do both components have the required matching values, e.g. material and nominal size, if these are compared in the connection settings? 4. Are there several entries for the same end type combination? Then the first one is used – remove conflicting combinations.
How do I edit many sizes of a part at once in the Catalog Editor?
Use the Property Editor (button at the bottom left of the Catalog Editor). It shows all sizes of the selected family as a table, so that you can enter values column by column or paste them with Ctrl+C/Ctrl+V, e.g. an addition to the order text. Save changes beforehand with "Save to Catalog", otherwise the editor still shows old values. Apply them with "Apply". For extensive changes, the Excel export is often faster.
In the catalog, do I create only the nominal sizes I currently need, or the whole range of the standard?
If possible, create the complete nominal size range of the standard. In our experience, the extra effort for two or three additional nominal sizes is small, and the catalog will then also suit the next project. Only if time is short, limit yourself to the range currently needed.
Same nominal size, different material – do I create a new size or a new part family?
Create a new part family: the material is stored with the part family, not with the individual size. A component made of a different material therefore gets its own family.
How do I bring a part from another catalog into my own?
In the Spec Editor, additionally open the source catalog via "Open Catalog" (plus icon), find the part on the "Catalog" tab – show the search row via the column filter icon – and copy it with Ctrl+C. Switch to your catalog and paste it with Ctrl+V. Make sure you are on the "Catalog" tab and not the "Spec" tab, as the context menus differ. For variants, use "Duplicate Component" instead of creating a new one.
Why can't I branch off a line even though there are pipes in the piping spec?
For branches, every piping spec needs a branch table. In the Spec Editor, open the branch table in the piping spec, click "Edit" and add the possible branch types (e.g. tee, nozzle or stub-in). Then select the nominal size combinations of header and branch, and assign the appropriate branch type with a right-click. Without an entry, Plant 3D does not create a connection at that point.
My decimal value 1,6 becomes 16 after saving. What am I doing wrong?
The correct separator depends on the field: in size variables (e.g. outside diameter, wall thickness, length) enter decimal values with a period, i.e. 1.6. In description texts (e.g. Long Description) write as usual with a comma (German settings). A wrongly placed separator is removed by the Spec Editor on saving without any message – so 1,6 becomes 16. Spot-check the values after saving and after every Excel import. Always select units such as weight from the drop-down list instead of typing them as text.
How do I create a part variant in the catalog without changing the original?
In the Catalog Editor, filter and select the component, then right-click > "Duplicate Component". The copy gets a new, unique long description (family), e.g., with a reference to the pressure rating or purpose. Under "Sizes", adjust the dimensions and purchase text. Important: when changing port data, always edit both sides (port 1 and 2). Accept with "Save to Catalog". Duplicating in the catalog is safer than changing values afterwards only in the piping spec.
What is the difference between "Save Catalog" and saving in the part?
The button at the bottom right saves only the component currently being edited to the catalog. "Save" at the top or in the File menu writes the entire catalog, including configuration, back from memory. If several people are working on a catalog at the same time, save only individual components; saving the whole catalog would overwrite your colleagues' changes. Only create new properties via the property editor when you are working in the catalog alone.
Why can't I attach an actuator to the valve I created myself?
When creating a new valve in the Catalog Editor, the selected graphic determines whether an actuator can be attached. Choose a valve graphic of the type valve body (Valve Body); for the variants with a permanently displayed operator, no separate actuator can be attached. Create the actuator as a separate component of the type actuator; in the dimension preview, double-click to see which dimensions, e.g. for a handwheel, need to be entered. Related support question: “Which dimensions from the data sheet go into which fields for a pneumatic actuator with handwheel?” Double-click the actuator to open the dimension image. L is the actuator height, HL the additional height of the handwheel, HD the handwheel diameter; with HA2 = 90° the handwheel points upward. Actuators depend on the actuator type, not on the nominal size. If no existing graphic fits, create a new actuator component instead of copying a wrong one.
Where can I get additional catalogs, and can I use them without checking?
The "Content Packs" link at the bottom of the Spec Editor takes you to catalogs and piping specs in the Autodesk App Store, some free, some paid, often in German and English. Close all Autodesk programs before installing. The content usually contains only geometry data and not always complete ordering information; a check for completeness and correctness is not guaranteed. Therefore do not take over parts without checking them; verify dimensions and texts against the manufacturer's or standards documentation.
I changed components in the catalog, but nothing arrives in the project – what do I need to do?
The piping spec in the project is a copy and knows nothing about later changes. 1. In the Spec Editor, update the spec from the catalog and save it. 2. Replace the spec in the project via the Project Manager: remove it and copy it into the project again – not via Explorer in the Spec Sheets folder. 3. Plant 3D then shows a spec update notification at the bottom right, which you use to update components that have already been placed. Use the Spec Viewer to check whether the component is included.
What is the best way to test a newly created piping spec?
Copy the piping spec into a test project and draw every component type at least once: a line with elbows, a branch (is a tee placed?), a change in nominal size (concentric reducer?), flanged and threaded connections. Then generate an isometric. If a part is missing its isometric symbol (SKEYSKEY – Symbol key (SKEY) Four-character symbol key for the isometric: the first two characters give the component type, the last two the end connection, e.g. VTFL = gate valve with flanges. Background and sources ›), the line is broken at that point; a rectangle with an asterisk indicates a wrong SKEY with the correct type. Correct errors in the Catalog Editor and then update the piping spec.
How do I create weldolets or weld nipples that are placed directly on a pipe?
In the Catalog Editor, do not create the part as a fitting but under the Olet component type, because only then can it be placed on a continuous pipe. Port 1 is the header side; enter the diameter of the pipe it is welded onto there. Port 2 is the outgoing threaded connection. You need a separate size for each header nominal size. After inserting it, check whether the part is oriented the right way round, and otherwise swap the ports.
In which catalog do I create an instrument if there is no dedicated instrument catalog?
Create it in your own valve catalog. The other catalogs in the content folder serve only as templates to copy from and are not edited. Assign inch dimensions to the nominal size via the spec overview (e.g. 1/2 inch = DN 15).
Why are part blocks missing when I pass my catalog on to colleagues?
Each .pcat file has a subfolder of the same name in which preview images and block-based components are stored. Therefore, only copy a catalog in Windows Explorer together with this folder and only when the Spec Editor is closed – for example when moving to a new content folder. For a new or slimmed-down catalog, it is better to create a new catalog in the Spec Editor based on a working existing one, delete components that are not needed and insert the desired components from other catalogs with Ctrl+C/Ctrl+V. Always pass on catalogs together with the subfolder.
What does the yellow exclamation mark in the spec editor mean?
Several components of the same type exist for the same nominal size, and no priority has been set. When drawing, Plant 3D always inserts the first component. Click the exclamation mark and set the order: for elbows, the 90° elbow must come first (otherwise, e.g., a 45° elbow is trimmed to other angles), for reducers the concentric one and for tees the equal (non-reducing) tee. Only confirm everything at once after you have checked each entry.
How can I build order texts or size descriptions automatically in Excel?
In the exported Excel file, use the CONCATENATE (or CONCAT) function and build the text from the existing columns, e.g. part description, standard, outside diameter, wall thickness and material, separated by spaces or hyphens. In the German version of Excel, the arguments are separated by semicolons, not commas. Drag the formula down over all rows, save the file and import it back into the Catalog Editor.
How do I limit the nominal sizes of a part in the piping spec?
In the Spec Editor, double-click the component or open "Manage Sizes" and deselect all nominal sizes that are not needed. Basic rule: only nominal sizes for which a pipe exists in the piping spec should be available. If there are several pipes per nominal size (e.g., different wall thicknesses), select exactly one here – a piping spec must be unambiguous, otherwise Plant 3D always takes the first one.
Why does Plant 3D place a placeholder flange or a placeholder gasket?
Plant 3D did not find a matching part in the active piping spec. The most common cause: pressure rating or facing of flange, gasket and mating flange do not match, or are not entered at all for one part. Check these values in the Catalog Editor for all parts involved, update the piping spec, and replace the placeholders. For verification, you can create your own view in the Data Manager that lists the parts by piping spec and short description – placeholders then stand out immediately. Related support question: “Plant 3D places only a placeholder part (e.g. PH Metric) instead of my bolt set – why?” Check the end type of the bolt set. In the support case, the end type “Undefined_ET” was missing; after adding it in the catalog and updating the piping spec, the bolt set was placed correctly.
Can I reuse my customized catalogs in a newer Plant 3D version?
In practice, catalogs and specs from recent versions can usually be reused without changes, so you can use the shared content folder for a newer version as well. Even so, keep the older version installed until all Spec Editor functions have been verified in the new version. Do not migrate a running project to a new version in the middle of editing; plan the switch for the start of a project. Related support question: “Can I simply copy catalogs and specs from a different Plant 3D version into my content folder?” Better not without checking. Mixed versions (e.g. a catalog from an older version, a folder from a newer one) led in one support case to no parts being placed anymore. First back up your content folder, work with the same version across the team, and carry over only a few items selectively. Related support question: “How do I migrate my own catalogs with block-based parts to a new Plant 3D version?” Create the CPakCPak Folders in the AutoCAD Plant 3D content directory (e.g. “CPak Common”) containing catalogs and their component files. The program expects these folders unchanged. Background and sources › structure in the new content folder identical to the old one (per catalog, subfolders 32, 64, 200, DWG – with 200 and DWG empty beforehand), extend ContentConfig.xml, then in Spec Editor choose Tools > “Migrate Specs and Catalogs”. The result is located under “Migrated Content”; copy the catalog to the CPak folder, copy the contents of DWG and 200 over afterward, and test with a block-based part.
Why does the wall thickness show "Varies" even though I entered a value?
Each part has separate values for each connection (Port 1, Port 2). If you have entered a value for only one port, the values differ and "Varies" is displayed. Activate "All Ports" in the dialog, and the value is set for both sides at once. Different values per port are only intended for parts such as reducers.
Which description should be maintained in the catalog as the order text?
The purchase text is the long description of the size (Long Description (Size)) – it appears in parts lists and isometrics. It should be complete enough to order without further queries: component type, ordering standard, nominal size or dimensions with wall thickness, pressure rating and material. The long description of the family is only the generic term and is not sufficient for ordering. An inspection certificate belongs in the design details rather than the material code. Purchased or supplied catalogs are only a starting point – always check purchase texts and wall thicknesses.
I moved components to another catalog – why does my piping spec no longer work?
The piping spec refers to the component in the original catalog. First check whether the component exists in the new catalog. Then open the piping spec, remove the old component with Remove from Spec, select the new catalog at the bottom and add the component again with Add to Spec. Save the piping spec and then replace it in the project.
How do I edit catalog data (e.g. wall thicknesses or order texts) in Excel and import it again?
1. In the Catalog Editor, filter for exactly the components you want. 2. Choose “Export” – the current catalog filter is exported, i.e. everything listed below, regardless of the selection; the complete catalog would produce many worksheets. It is best to keep working files in a separate export folder. 3. Edit in Excel, e.g. assemble the order text column (long description, size) with CONCATENATE from description, material, outside diameter and wall thickness. 4. Save and close the Excel file – open files cannot be imported. 5. “Import”: changed components are highlighted in yellow; review the changes, accept them individually or all at once using the arrow buttons, and confirm with “Apply” or OK. Related support question: “How do I change a text in the long description (size) for all nominal sizes at once?” In the Spec Editor, filter for the component, choose “Show all part sizes”, export the current filter to Excel, change the texts and import them again. Then switch back to “Show all part families”.
How do I correctly create my own catalog or a new piping spec?
In the Spec Editor, always use "Create Catalog from Existing" or create a piping spec from an existing catalog. Only then is the required folder structure with all subdirectories created. Do not copy or rename catalog and spec files in Windows Explorer – finished files may at most be moved. Also, never work in the default catalog; always work in your own copy.
Why do threaded parts engage twice as deep as they should?
The engagement length is evaluated on both components. If you enter it on both the female thread (e.g., coupling) and the male thread (e.g., nipple), it is counted twice. Therefore define consistently on which side the engagement length is maintained – either always on the female thread or always on the male thread – and enter 0 on the mating part.
Where do the gasket and bolt set at flange connections come from, and why can't I insert them myself?
Gaskets, bolt sets, welds, etc. are connection parts (called "Fasteners" in the Spec Editor). They are created automatically when two end types meet according to the connection settings, and generally cannot be placed manually. For flange connections, the program checks, among other things, whether pressure rating, facing and nominal size match. For this to work, matching gaskets and bolt sets must be included in the piping spec and the corresponding values must be entered for all components involved.
Can I simply add new rows for additional sizes in the exported Excel list?
No. Each size has an internal identifier stored in hidden columns, which the import uses to match the rows. New rows without an identifier find no counterpart, and copied rows would overwrite the original row. Therefore create additional sizes in the Catalog Editor first (e.g. duplicate the size and save), then export and enter the values in Excel.
Does a piping spec in the project work without access to the content folder?
Largely yes: when copied into the project, the piping spec is placed in the project folder "Spec Sheets", and the .pspc contains all catalog data. This allows you to draw without the content folder being accessible. The exception is block-based parts (e.g. valves with stored DWG geometry): these refer to the DWG subfolder in the content folder. To administer the piping spec, on the other hand, you always need the associated catalogs.
How do I set up the branch table so that tees are inserted at branches instead of pipe-to-pipe?
1. In the Spec Editor, open the Branch Table tab and edit the legend: add branch types, e.g., tee, reducing tee or tee plus reducer. 2. Select the cells in the table (multiple selection with Ctrl or Shift) and assign the desired branch type via right-click. Only combinations for which matching components exist in the piping spec are offered. Additional variants marked as permitted serve only as documentation in the export and do not affect drawing.
Why are two bolt sets placed for wafer valves or spectacle blinds?
The component has the wrong end code. Wafer-type components (e.g., wafer butterfly valves, orifice plates, spectacle blinds) must have the end code WFWF – Wafer type (between flanges) End code of a component connection in AutoCAD Plant 3D: wafer type, e.g. for orifice plates or butterfly valves between two flanges. Plant 3D then places only one through-bolt set. Background and sources › at both ports, not FLFL – Flange End code of a component connection in AutoCAD Plant 3D: flange. Plant 3D adds a mating flange with gasket and bolts. Background and sources ›. Plant 3D then places only one continuous bolt set. To change it in the Catalog Editor: select the component > connection port properties > set the end code to WF, use the arrow to switch to the other side and select WF there as well. Choose "Save to Catalog" and update the piping spec.
How do I turn a manufacturer's STEP model into a catalog part?
1. Import the STEPSTEP – Standard for the Exchange of Product model data Vendor-neutral 3D exchange format for parts (ISO 10303), e.g. for equipment from the manufacturer. Background and sources › model into a DWG, explode blocks until only solids remain and remove unnecessary details. 2. Place the base point at the future connection and create a uniquely named block. 3. Use the PLANTPARTCONVERTPLANTPARTCONVERT AutoCAD Plant 3D command: turns an AutoCAD block into a piping component by adding connections (ports). Background and sources › command to define the ports (point, direction, accept, add, exit). 4. In the Catalog Editor, create a new component with block graphics and use "Select block from model" to choose the DWG containing the block. The DWG must remain permanently accessible.
After updating the piping spec, properties such as the material are missing – why?
When updating from the catalog, the component data in the piping spec is replaced by the catalog values. Values that you entered only in the piping spec via property override can be lost in the process. If connections depend on these values (e.g., material matching), placeholders are inserted afterwards. Therefore enter values you need permanently directly in the catalog whenever possible, and check the properties in the Spec Editor after every update.
How do I get connection points placed automatically in long pipes?
For the pipe in the catalog, enter a fixed length instead of a variable length, e.g. 6000 mm. Plant 3D then automatically divides the line into sections of this length. Which connection is placed between them depends on the end type of the pipe: a weld for butt-weld ends, and the appropriate connecting part, e.g. a coupling, for other end types.
No component images are displayed in the Catalog Editor – why?
Often the program version and the content folder do not match. Check which version the content comes from, and transfer the catalogs to the content folder of your version.
A threaded connection between two parts is not established – what could be the cause?
In the project configuration, check the connection setting of the threaded connection, especially the option for British and metric connections, as well as the connection information of both components (metric/British). In the support case, this option was the cause.
A flange from the piping spec does not appear in the selection – why?
If a flange added to the piping spec does not appear in the selection, check its part class: if it is defined as a stub end, it counts as a connection part and cannot be placed on its own. Create the part as a flange; then it can be placed.
Plant 3D calculates no bolt length or a wrong one – what is the reason?
First check whether a flange thickness is entered on the flange or valve and on the bolt set – without it, no length is calculated. Plant calculates: bolt set length − 2 × bolt set flange thickness + flange thickness of flange 1 + flange thickness of flange 2, and rounds up to the next value of the bolt assignment standard; if no standard is stored in the bolt set under “By Standard”, it rounds up to full 10 mm. For loose flanges, the collar or flared edge counts toward the flange thickness; for wafer-type valves (e.g. butterfly valves), the face-to-face length is added – enter that length in the “Flange thickness” field. Valves with tapped blind holes receive the thread engagement depth instead of a flange thickness; those are rounded down. In one further case, it helped to create all connections individually in the connection settings instead of combined.
Should each user use their own catalog folder?
No. By default, the installation creates a local content folder with several content packs (e.g. a shared catalog for nozzles, supports, instruments and placeholders, as well as standards-based catalogs). In production use, a shared network folder is recommended so that all users work with the same catalogs and piping specs and nobody has to maintain their own set separately. After changing the content path, restart the Spec Editor, as it reads the configuration at startup.
Why can't I assign a tag to a valve in Plant 3D?
This is usually due to the selected class: not every class has a Tag property. Select a class with a tag or add one in the configuration.
After the version change, my piping specs still access the old content folder – how do I switch them to the new catalogs?
The catalog path is fixed in every piping spec. If the old content folder is to be kept, rename it (e.g. with "_alt") instead of migrating the specs. Then open each spec in the Spec Editor: Plant 3D reports the missing catalog and asks for the new location. Switch to the new catalog folder and append ".pcat" to the catalog name in the File name field – without ".pcat" only the folder of the same name opens. Repeat this for every other catalog of the spec and save. Ideally, switch the specs over once in the template and then copy them into the projects.
How do you create a valve from another manufacturer that looks similar to an existing one?
You do not want to rebuild a similar part from scratch: 1. In the Catalog Editor of your own catalog (never the original catalog), select the existing part family and click “Duplicate component”, then give it a new name. 2. Adjust standards and “Long Description (Family)”. 3. For each nominal size, change “Long Description (Size)” and differing dimensions – with many sizes, export to Excel, edit and re-import. 4. Save with “Save to catalog” and add the part to the piping spec.
How do I create a component for the piping spec from a solid (e.g. STEP or a manufacturer model)?
1. Insert the solid at 0,0,0 and align it with the X axis. 2. Use BLOCK to create a block with base point 0,0,0 and save the drawing. 3. Convert it into a Plant part with the function for block-based parts and set the center point and direction at each connection; finish the function with "Exit", not with Enter. 4. In the Spec Editor, create a component with custom graphics and assign the appropriate block to each nominal size. For many sizes, parametric scripts are more efficient.
How do I take only certain sizes from the catalog into the piping spec in AutoCAD Plant 3D 2027.1 and set properties at the same time?
You want to fill a piping spec faster and without rework: since version 2027.1 the Catalog Browser in the Spec Editor has a size filter and property overrides. Both can only be set when the “Spec” tab is active. How to proceed: 1. Open the piping spec in the Spec Editor and select the catalog in the Catalog Browser. 2. Next to “Spec size filter” click “Set”. In the “Size Filter” dialog box you set the smallest and the largest size, the size range for reducers and the sizes you want to exclude. 3. Next to “Spec overrides” click “Set”. In the “Property Overrides” dialog box select or type a property, enter the value and add further rows with “Add Row”; with “Remove Row” you take a row out again. 4. Insert the parts with “Add to Spec”. Only the sizes shown after the filter are taken over. The overrides replace the matching values in the piping spec. Note: the filter only applies to the active catalog and is reset when you change the catalog. You see the active range next to “Spec size filter”. Your advantage: you delete and change far fewer rows by hand. Background: with this Autodesk has implemented wishes from the Idea Station, e.g. idea 11583964 (108 votes) and idea 13702160 (27 votes), as of 07.11.2026. Source: Autodesk Help, What’s New in AutoCAD Plant 3D 2027, section 2027.1 “Spec Editor Enhancements”. Next step: if your project behaves differently than described, write to support@seitz-ingenieure.de – we will look at it together via remote session.
I created a new end code, but the connection does not work for my colleagues. Why?
Newly defined end types (end codes) are stored locally in the program folder of each computer, whereas the join settings are stored in the project. Every user must therefore create the end codes identically on their own computer. Agree on new end codes within the team and document the names. If they are missing, the joins are not created or messages such as “Parts cannot be joined” appear. Related support question: “Where are my custom end codes (EndCodesConfig.xml) stored?” User-specific under %AppData%\Autodesk\Autodesk AutoCAD Plant 3D
How do I create a part in the catalog that does not exist yet?
In the Catalog Editor, choose "Create Component". 1. Specify whether it is a parametric component or an AutoCAD graphic (block). 2. Select the component type (e.g., flange, valve, fitting) and the matching base shape. 3. Enter the dimensions for each nominal size: with 0, the dimension is calculated automatically; with -1, the element is not displayed. 4. For each port, define the end code, pressure rating and facing, and assign the long description/purchase text. Then add it to the piping spec and use it in the test project – always try out new components before using them in production.
Can I edit the piping spec file (.pspc) directly?
A piping spec consists of the .pspx (a compressed file containing, among other things, the component list, branch table and priorities) and the .pspc, an SQLite database with a complete copy of the component data from the catalog. That is why a component in the piping spec can have different values than in the catalog. Technically, the database can be opened, but because of the internal links, an incorrect entry can quickly destroy the piping spec. Therefore always make changes via the Spec Editor.
How do I take individual parts, e.g. a weld neck flange, from a downloaded catalog into my own?
Additionally open the downloaded catalog in the Spec Editor and show the column filter. Filter by short description, pressure rating and facing, select the component, copy it with Ctrl+C and paste it with Ctrl+V on the Catalog tab of your own catalog (the Spec tab only offers “Add to spec”). Remove nominal sizes you do not need, add missing ones by duplicating, and check the end type and pipe outside diameter.
The manufacturer gives no pressure rating for a component – what do I enter in the catalog?
Do not estimate: A wrong entry is worse than a missing one. Leave the field empty and clarify the pressure rating with the supplier. Keep in mind, however: without a pressure rating, Plant 3D cannot form a flange–gasket–bolt set connection, because pressure rating, nominal size, and facing must match for that. Therefore, add the component to a production piping spec only after this has been clarified.
When inserting a component, Plant 3D reports that it cannot be created with the parameters – why?
The catalog or spec is missing dimensions for this size. Add the missing values in the Catalog Editor, update the spec in the project, and place the part again.
When inserting a custom part, “The path is not of a legal form” appears – what should I check?
If System.ArgumentException: The path is not of a legal form appears when inserting a custom part, check whether the content folder is correctly assigned and complete, and whether the piping specs of the custom parts exist in the project.
How do I name piping specs sensibly, and how do I pass a piping spec on for review?
A naming scheme made up of pressure rating, material, sequential number and, if applicable, flange or gasket type has proven effective. Material, pressure rating, temperature range and medium belong in the description of the piping spec; they also appear in the Excel export. For review, export only “Spec sheet and branch table”; for complete documentation, use the full export with all components.
How do you bring a few self-made block parts into a piping spec?
1. Never change the original catalog: create a copy via File → New → “Create catalog from existing…”. 2. First add connection ports to the block with PLANTPARTCONVERT and save it. 3. In the Catalog Editor choose “Create new component”, select the custom block-based AutoCAD DWG graphic under Graphics, and add port values and the long description. 4. Under “Sizes”, assign the matching block for each nominal size via “Select model…”. 5. “Save to catalog” and add the component to the piping spec.
Can a PLM system read the project data from P&ID or Plant 3D?
Officially, Autodesk supports only Vault and Autodesk Docs/BIM 360.BIM – Building Information Modeling Planning, building and operating with a digital model that contains not only the geometry but also the properties of the components. Background and sources › In SQLite projects, the DCF files are databases and can be read if the PLMPLM – Product Lifecycle Management Management of all data of a product over its entire life – from development through manufacturing and operation to decommissioning. A PLM system is the software for this. Background and sources › system can query databases; in SQL Server projects, the DCF contains only the connection to the database. Changing the data via the PLM system is not supported.
Valves only show their connection points when placed, but the geometry is correct in the Spec Editor – what can I do?
You want to see your valves completely in the model again: usually the storage location of the block-based components does not match the catalog. This happens, for example, with a downloaded catalog that lacks the subfolder of the same name. Plant 3D then stores additional block-based components in a separate folder instead of next to the catalog. If old content folders also exist, the paths are no longer unambiguous. How to proceed: 1. Back up the catalog, piping spec and project. 2. Move the folder with the block-based components to the catalog – it belongs next to the .pcat file as a folder of the same name. 3. Rename old content folders (e.g. with “_alt”) instead of deleting them. That leaves only one valid path. 4. Open the piping spec in the Spec Editor and explicitly link it to the correct catalog: when opening, Plant 3D asks for the missing catalog; select the catalog in the new folder and append “.pcat” in the File name field. Save the piping spec and update it in the project. 5. Place a valve in a new drawing as a test. 6. Do not repair the affected drawing: select the pipelines, copy them with Ctrl+Shift+C (Copy with Base Point) and paste them into a new drawing. Your benefit: the piping spec and components work again without redrawing the model.
My modified Excel list is not recognized when importing into the catalog – what is wrong?
Import at the same level where you exported: gaskets into gaskets, valves into valves – not at the parent level of the piping system. In addition, the structure of the exported file must not be changed.
Plant 3D places two bolt sets on a wafer butterfly valve – how do I correct this?
If Plant 3D places two bolt sets on a wafer butterfly valve, remove the entry in the “Bolt Set” joint component in the connection settings. Plant 3D places the long bolt set for wafer valves automatically as soon as the end type is defined as “Wafer”.
How do I specify whether a tee, a reducing tee or a nozzle is placed at branches?
In the Spec Editor, open the branch table. 1. Use "Edit Legend" to create the permitted branch types, e.g., pipe-on-pipe/nozzle, equal tee, reducing tee or tee with reducer. 2. In the matrix of header and branch sizes, select the cells (Ctrl + left mouse button for multiple selection) and assign the appropriate branch type. Plant 3D only uses components contained in the piping spec; if one is missing, it points this out. The basis should be the branch specifications of your piping spec definition.
How do I specify which connecting part is inserted when two end types meet?
In the Project Manager, open Project Setup > Plant 3D DWG Settings > Join Settings. The upper area shows which end types may be joined directly to each other; in the lower area you define joins in which a part is inserted (e.g. nipple or coupling). Assign a join name without special characters or spaces, select the two end types and the part to be inserted, and specify which values must match (e.g. nominal size, material). The part must also exist in the piping spec. Related support question: “How can I make a nipple be placed automatically on a coupling (and vice versa)?” In Project Setup > Plant 3D DWG Settings > Join Settings, remove “PLPL – plain end End code of a component connection in AutoCAD Plant 3D: plain end, e.g. of a pipe. Background and sources ›” from the threaded join under the simple joins; under the multiple joins, change the auto threaded join to “THDMTHDM – Male thread End code of a component connection in AutoCAD Plant 3D: male thread. Background and sources › / PL” and use “…” to select only short description and nominal size as properties. Also create a “THDFTHDF – Female thread End code of a component connection in AutoCAD Plant 3D: female thread. Background and sources › / PL” join in the same way. The parts need a matching short description for this.
How do I structure my catalogs sensibly so that the Spec Editor stays fast?
A split by material and function has proven effective, e.g., pipes/fittings per material, valves, instruments and a separate gasket catalog, since gaskets are used across materials. Delete unneeded sizes and standards in copies. The standard end codes are predefined in the program; you can add your own. An emptied catalog initially keeps its file size; after a backup, this can be reduced with an SQLite tool using the VACUUM function. Never work in the original catalogs, always in your own copies.
Can a long description style (LDS) output values of the second connection?
A long description style (LDS) only accesses the values of the first port; wall thickness or outside diameter of the second port cannot be included. An entry such as S2S1, S2 First and second connection (port 1, port 2) of a component in AutoCAD Plant 3D, e.g. in the catalog and in the isometric configuration. Background and sources ›.WallThickness in the LDS file causes the Spec Editor to crash. For inline components, only the nominal size of the first port counts.
How do I set up a custom flange connection, e.g. for two different mating flanges (tongue/groove)?
1. With a drawing open, go to Project Setup > Plant 3D DWG Settings > Connection Settings and use "Add" to define two new end types (end codes) with "Flange" checked; use letters only for the names. 2. Create the connection of the two end codes with gasket and bolt set and select the matching properties (nominal size, pressure rating, facing). 3. Define that the mating flange is placed whenever a pipe is encountered. 4. Enter the end codes for the flanges in the Spec Editor.
Why are new rows that I add to the exported Excel list not imported?
Each size has an internal identifier in a hidden column of the Excel file. The import uses this identifier to match the rows. If you copy a row, the identifier is duplicated – the last one imported overwrites the first. New identifiers cannot be created in Excel. Excel is therefore only suitable for changing existing entries. Create new sizes or variants in the Spec Editor first (e.g. with "Duplicate Component"), export again and do the fine-tuning in Excel.
No welds appear on bent pipes – what is the cause?
If no welds appear on bent pipes, check the end type: the pipe needs PL; BVBV – Butt weld end End code of a component connection in AutoCAD Plant 3D: weld end (butt weld). Where BV meets BV or a plain end, Plant 3D places a weld. Background and sources › is intended for fittings. If BV meets PL, no connection component is defined in the connection settings.
My block-based component places the wrong block at one nominal size – what is wrong?
Block-based components are sensitive to block names and nested blocks. Check whether the block name and content match. The safe approach: create one clean block per size from a 3D solid (inner blocks exploded), convert it with PLANTPARTCONVERT, and reassign it in the Spec Editor.
A pipe standard includes several series with different outside diameters – how do I represent this in the catalog?
Duplicate an existing pipe component and create a separate part family for each series, because the outside diameters differ. Identify the series in the designation. If possible, create the entire nominal size range of the standard – a few extra nominal sizes cost hardly any time. Fittings and flanges must use the same series, otherwise the connections do not match.
How do we set up a shared catalog folder (content folder) so that several colleagues work with the same catalogs?
1. Start the Spec Editor via right-click "Run as administrator". 2. Under Tools > Shared Content Folder, click the three dots and select a folder on the network drive to which everyone has write access. 3. Only the first user checks the box to copy the local content so that their content is transferred to the network folder; all other users select the same folder without the check mark – otherwise the content would be overwritten. The setting applies per computer, not per user, and must be made on every workstation with administrator rights. Do not delete or rename the existing CPak folders; the program expects them.
How do I add an additional property to a catalog, e.g. an English description?
In the catalog, open the property editor ("Manage Properties"), enter the name without spaces or special characters and choose whether the property applies at part family or part size level. Be sure to select "All Parts" instead of only the current part, otherwise the field will be missing for other parts. Apply with "Add" and "Apply". A deleted property name may not be reusable later – so plan the names in advance.
How do I bring a modified piping spec into an existing project and existing drawings?
Always bring the piping spec into the project via the Project Manager: remove the spec there and insert it again using "Copy Spec to Project". Do not copy or overwrite files in the "Spec Sheets" project folder in Windows Explorer – such copies often do not arrive in the project. Then open the drawing: a spec update notification appears in the status bar. Right-click to start the check and update the components. Afterwards, check in the properties of a component whether the new values have been applied; if in doubt, place the component again.
I only have the piping spec left, but no catalog – can I recover the catalog?
Yes. In the Spec Editor, export the piping spec in Excel format for the Pipe Catalog Generator, start the Pipe Catalog Generator, open and validate the file, and save the result as a new catalog (.pcat) or add it to an existing one. This only works for script-based parts, not for block-based ones. Identical parts from several piping specs are created twice. Since the associated catalog subfolder is not created in the process, copy the parts into a properly created catalog afterwards.
Why does “mm” appear after new nominal sizes, and how do I fix that?
“mm” means: Plant 3D does not know the nominal size. Add it in the NominalDiameterMap.csv (Size ID sequential, value, unit, display, conversion, alternative display); for the reverse direction (e.g. inch → mm), add a separate row. Deploy the modified file on all Plant 3D workstations.
Custom parts no longer work reliably – is this due to different program versions?
If different program versions (e.g. 2022 and 2026) access the same content folder, custom components no longer work reliably. Work with one version, back up the content as a ZIP after installation, and copy in only the PCATPCAT AutoCAD Plant 3D catalog file with all components of a catalog, their sizes and properties. Technically it is an SQLite database. Background and sources › files you need together with their associated folders.
How does Plant 3D decide which mating flanges, gaskets and bolt sets are placed automatically?
The basis is the end codes of the component ports (e.g., FL = flange, BV = butt weld end, PL = plain end, THDF/THDM = female/male thread). Which codes exist is defined in the program; what happens when they meet is defined per project in Project Setup under Plant 3D DWG Settings > Connection Settings. There it is specified, for example: if FL meets FL, a gasket and bolt set are inserted, provided nominal size, pressure rating and facing match; if FL meets a weld or plain end, a mating flange is placed.
After updating the piping spec, one component is replaced by another – why?
Presumably two parts have the same internal ID (PnPID), e.g. after sloppy duplication in the catalog. Duplicate the part again in the Catalog Editor and save; this creates a new component with its own ID. Then update the piping spec.
What determines what happens at a connection – the geometry or the end type?
What happens at a connection is determined solely by the letters of the end type, not by the appearance or the geometry values of the 3D model. Examples: BV butt weld, THDM male thread, THDF female thread, PPLPPL – Plastic weld End code of a component connection in AutoCAD Plant 3D: plastic weld. Background and sources › plastic weld, PSWPSW – Plastic socket End code of a component connection in AutoCAD Plant 3D: plastic socket. Background and sources › plastic socket; FL always creates a mating flange, BV a weld. Therefore, check all connections of every component.
Where can I get better catalogs than the ones supplied, and what do I need to watch out for when installing them?
Additional content packs (e.g. German-language pipe and fitting catalogs or steel construction catalogs) are available in the App Store, accessible via the Plant 3D start page; many of them are free. Downloading works without administrator rights, but installing into the Shared Content Folder does not. Back up your existing catalogs before installing, as an installer can overwrite catalogs of the same name. Check downloaded content before using it, as it may contain errors or incomplete information.
Why can't I assign an actuator to my valve?
Actuators can only be assigned to components of type ValveBody, not Valve. Create valves that are to receive an actuator as ValveBody.
Plant 3D places the wrong bolt sets at flange connections – how do I define which one is used?
You want the desired bolt set to be placed at flange connections. 1. Open the piping spec in the Spec Editor and check the bolt sets it contains for each nominal size; remove those not needed so that, if possible, only one suitable set remains per size. 2. If the spec still contains several parts of the same group for one size, the spec sheet shows a yellow warning symbol in the Part Use Priority column. 3. Click it, use the arrows in the dialog to define the order and mark the conflict as resolved (green circle). 4. Save the spec, update it in the project and check it in a test model. This gives you an unambiguous, traceable selection.
In the Catalog Editor, the wall thickness shows “varies” even though I entered the same value everywhere – why?
Many values exist per connection, e.g. wall thickness 1 and wall thickness 2. If you have filled in only the first connection, the values differ and the editor shows “varies”. In the input form, enable “All connections” so the value applies to both sides – or fill in both columns. For reducers, deliberately enter different values on the left and right.
Plant 3D – 3D model (117)
How do I flip a fitting during insertion if it is placed with the wrong connection?
While inserting, press the Ctrl key to cycle through the component's connection points, then place it. To check whether the connection is correct, turn on the connection indicators under visibility at the top and click the connection point between the components; Substitute Part shows the connection type (e.g. butt weld or threaded connection). To remove an unwanted connection, select the connection point and press Delete.
How do I select an entire connected line and hide the rest?
First make sure the affected layers are not locked. Click a pipe, right-click > Add to Selection > All Connected Parts (or connected line number). Then right-click again > Isolate > Isolate Objects – only the selected line remains visible. In the Properties palette, the entry "*VARIES*" tells you that the selection contains different line numbers.
In a drawing, all colors look very dark – how do I get the normal display back?
Reset the visual style to the default by right-clicking. In the support case, the display was back to normal afterward.
Why is no isometric generated for my pipe?
The prerequisite is that all connected parts have a line number – without a line number, no isometric is created. If an error notification appears at the bottom right of the status bar, click it to open the log; it states why creation failed (e.g. database or network problems when generating the intermediate file). Also check whether a spec update is recommended, and run it first.
Do I have to export isometrics to pass them on as DWG?
No. Isometrics are already regular AutoCAD DWGs. They are located in the project's Isometric folder and can be passed on directly.
Plant 3D places an elbow with an exclamation mark even though my piping spec does not contain an elbow. Why?
If a required component is missing from the piping spec, Plant 3D inserts a placeholder at that point so you can continue drawing. The exclamation mark indicates this; click it to see the cause. Add the missing component (e.g., an elbow) to the piping spec and update the project; the placeholders can then be replaced. Whether placeholders are visible is controlled via the visibility settings.
My valve does not connect to the pipe when inserted – what am I doing wrong?
You want to place a valve cleanly in an existing line. 1. Open the Spec Viewer via Home > Part Insertion, select the valve and click "Insert in Model". 2. If the insertion point is not at the desired connection, switch it with Ctrl. 3. Select a specific object snap: hold down Shift, right-click in the drawing area, e.g. Midpoint or Nearest. Many object snaps active at the same time can mask the desired point – reduce them if necessary. 4. Click a point on the pipe, specify the rotation or confirm with Enter. This places the valve at the desired position in the line.
Suddenly I can no longer zoom in the ortho layout – what is going on?
You want to zoom freely in the layout again. Often a large, unlocked viewport is active in the background – then every zoom only affects its content instead of the sheet. 1. Double-click outside the viewports to switch to paper space. 2. Select the interfering viewport and set "Display locked" to "Yes" in the Properties palette (alternatively via the lock in the status bar). Locked viewports protect against accidental zooming and panning. 3. Zoom out and delete the viewport if it is not needed. 4. If it comes from the drawing template (DWT), remove it there as well. This keeps new ortho layouts free of it too.
How do I create a new Plant 3D project based on our company template project?
1. In the Project Manager, choose "New Project" and specify the name and location. 2. Enable the option "Copy settings from existing project" and select the Project.xml file of the template project. 3. Check the following pages (paths for P&ID and 3D drawings, symbol standard, database) and confirm with Next. 4. At the end, check the box to open Project Setup: if Project Setup opens without an error message, the project was created correctly. Note: a copied project does not automatically inherit later improvements to the template.
A drawing can no longer be opened – how do I rescue it?
Open the file via the Drawing Recovery Manager, save it again, and use it to replace the defective DWG. In projects, do not change the file name.
Why is the weight of my structural steel profiles wrong after a change?
The weight is taken over only when placing from the catalog. If you change the length or profile afterward, it is not recalculated – reset the profile or correct the value. For custom profiles, the mass is stored in the profile XML.
Does Plant 3D warn me when I connect a component from a different piping spec?
When routing, Plant 3D offers only parts from the active spec. If the connection codes match, however, a part from a different spec can be connected without a warning. A spec break then appears on the isometric. If in doubt, check the spec in the part's properties.
Plant 3D keeps resetting my nozzle designation (e.g. N1.1 or M1) – how do I name it freely?
In the tag format of the nozzle, change the expression to “Free-form value”. You can then enter any designation.
Structural steel or other objects disappear in the “Shaded” visual style – what helps?
Known display issue. Set the system variable FASTSHADEDMODEFASTSHADEDMODE AutoCAD system variable: turns the newer cross-platform 3D graphics system on (1) or off (0). The variable no longer exists in AutoCAD 2027. Background and sources › to 0 (up to AutoCAD 2026) or disable hardware acceleration; alternatively, use a different visual style. For very large drawings, split the model across several DWGs and view the complete model in Navisworks.
Can I export several lines into one common PCF file?
No. Plant 3D generates one PCFPCF – Piping Component File Text file with which AutoCAD Plant 3D passes piping data to the isometric generator and to other programs. Background and sources › file per line number.
In one viewport objects are missing, in others they are not – why?
The layers are probably frozen in the viewport (VP Freeze). Double-click inside the viewport and thaw the layers in the Layer Manager in the “VP Freeze” column.
Which isometric settings are particularly useful in practice?
In Project Setup under Isometric DWG Settings: switch off automatic split points and set split points yourself – this keeps unchanged sections identical in a revision. Enable weld numbering (including field welds). Output slope in mm/m instead of percent, since on site it is usually measured with a folding rule. Show insulation in isometrics. The "Overwrite existing files" option can be preset directly. Small nominal sizes are displayed in color or with a smaller symbol scale via the theme settings.
Why doesn't the date in the isometric title block show the current date?
The Date and Create Date fields refer to the template (DWT) and do not change. The plot date is updated with every print, the save date with every save. Use one of these fields or enter the date manually.
Do I need a separate elbow in the catalog for every angle?
No. With the custom bend function, any angle from 1° to 90° is possible; the angle can be adjusted via dynamic input. On the isometric, each custom bend appears as a separate part; you can also output the angle via the bill of materials table of the iso template.
Objects disappear in the 3D model or AutoCAD crashes when orbiting – what can I check?
As a test, disable hardware acceleration. In three support cases (objects disappeared after switching to Windows 11, crash when orbiting in 3D, structural steel invisible), this was the solution.
Can the weld list be changed so that it numbers flanges or flanged joints?
No, the weld list cannot be switched to connections or flanges. As a workaround, give each flange its own number in a property (e.g. via Excel import in the Data Manager) and create a dedicated label for it in the ISO style.
Components have lost their Plant 3D properties – can they be repaired?
If Plant 3D components have lost their properties (they are just a pipe or an inline object without data), they cannot be repaired. Restore the drawing from a backup or place the affected components again. For this reason, back up your project regularly.
Insulation is not displayed on fixed-length pipes – how do I show it?
The system variable PLANTINSULATIONMODEPLANTINSULATIONMODE AutoCAD Plant 3D system variable: determines whether insulation on pipes is displayed. Background and sources › switches the insulation display. If a pipe after a flange is always placed with an unexpected length, check the minimum or fixed length entered in the Spec Editor.
How do I create an IFC file from my Plant 3D model?
You want to pass on a Plant 3D model in IFCIFC – Industry Foundation Classes Open exchange format for building and plant models (BIM), standardized as ISO 16739. Background and sources › format to other disciplines. Plant 3D does not export directly to IFC; the route is via an AutoCAD copy. 1. Open the model drawing and run EXPORTTOAUTOCAD. This creates a copy in which the Plant objects are converted into simple AutoCAD objects; the original remains unchanged. 2. Open the exported drawing in the Architecture toolset (alternatively MEPMEP – Mechanical, Electrical and Plumbing Collective English term for building services: heating and ventilation, electrical and plumbing. Roughly equivalent to the German TGA; AutoCAD MEP is the matching AutoCAD toolset. Background and sources › or Civil 3D). 3. There, export the active drawing as IFC; a LOGLOG Log file: a program writes into it what it has done and which errors occurred. Background and sources › file is created alongside the IFC file. Note: the intelligent behavior of the Plant objects is lost in the copy. This gives you an IFC file for coordination without changing your project.
How do I check whether my project still contains wrong or old references?
In the Project Manager, right-click the project name and select "Audit Project". Then press F2 to open the text window with the audit log – there you can see errors found, e.g. references to templates or paths of another project. Run the audit again after a correction until no more errors are reported. Drawings that are listed in the project but no longer exist can be removed from the project by right-clicking.
My ortho view is not generated or aborts – what could be the cause?
Often caused by individual, highly detailed objects (many faces, thousands of individual parts) or by moved external references. Exclude suspect objects as a test, simplify them (e.g. contour simplification in Inventor) and avoid surface models. External references are not derived and should be inserted at 0,0.
My Plant 3D drawing becomes extremely slow after importing manufacturer models – what can I do?
Very detailed imports (thousands of individual parts, surfaces, hundreds of MBMB, GB, TB – Megabyte, gigabyte, terabyte Units for data volumes: 1 GB (gigabyte) = 1,000 MB (megabytes), 1 TB (terabyte) = 1,000 GB. Background and sources ›) overwhelm AutoCAD. Simplify models before importing (e.g. contour simplification in Inventor), use blocks instead of copied solids, use Plant 3D gratings instead of solids, and distribute the model across several DWGs. It is better to display detailed models in Navisworks (NWC/NWDNWC – Navisworks cache file File that Navisworks creates when loading a foreign file so that it loads faster the next time. Background and sources ›NWD – Navisworks file (published) Navisworks file in which all models are stored permanently – for sharing, also with the free Navisworks Freedom. Background and sources ›).
How do I pass on an ortho drawing as a plain AutoCAD drawing?
Right-click the layout tab › “Export Layout to Model”. This creates a normal DWG with 2D geometry that can be edited further, e.g., in AutoCAD Mechanical. If no dialog opens, set FILEDIAFILEDIA AutoCAD system variable: determines whether file dialogs open (1) or AutoCAD asks for file names on the command line (0). Background and sources › to 1.
Gaskets are missing on a spectacle blind, or the connection is not made – what helps?
Place the spectacle blind again and pull the adjoining valve to the connection point with the STRETCH command. In the support case, the connection was not created using the grips.
The reference to the continuation line is missing on the isometric – why?
Check the connecting line: in the support case, it had no spec assigned. For flat-face flanges based on a loose flange, the continuation is also missing (only one grip) – use a flange type with two grips there.
Numeric values in the isometric BOM have a shifted decimal point – what can you do?
In Plant 3D 2026 Update 1, numeric values in the isometric BOMBOM – Bill of Materials Bill of Materials – parts or material list. In AutoCAD Plant 3D the BOM-ATTRIBUTES section of Iso.atr defines the component properties on the isometric. Background and sources › are output with a shifted decimal point (e.g. 14500 kg instead of 145 kg). The bug is known to Autodesk; until it is fixed, generate the isometric drawings with version 2025.
How do I assign line numbers to many pipes afterwards?
Open the Data Manager, expand the pipe lines in the tree structure and select the parent level so that all line segments appear in the table. Use the magnifying glass icon at the start of the row to zoom to the respective line, then enter the number in the column – the tag and, with the appropriate configuration, the layer are adjusted automatically. As a rule, assign numbers from the start, provisional ones if necessary; unnamed lines lead to confusion later.
Why does the bill of materials show only a generic description instead of the order text?
In the table setup, the family designation column is used instead of the size designation. To change this: Project Setup > Isometric DWG Settings > table setup, or for orthos under "Title Block Setup" > Tables. Select the long size description, i.e. the order text. Further columns (e.g. material) can be added. Useful options: list pipes as cut pieces, output length instead of quantity, show bends separately. For orthos, activate the required BOM types (pipe, equipment, nozzles, steel) so that they are available for selection.
Glued joints are on the wrong layer in the isometric drawing – what is the cause?
Glued joints appear on the isometric drawing on the layer “Symbol” instead of the weld layer if the model was created in the German 2024 version; in English versions they are on “Weld”. What matters is the language version in which the model was created. Autodesk has reported the bug to development.
Some parts are missing in the Report Creator – what could be the reason?
Common causes from support: (1) Status “Existing” – the report filters out existing parts; (2) for a pipe, “Fixed length” is empty instead of 0 – remove the pipe from the report query and add it again; (3) the component type (e.g. supports) is not included in the report template – add it in the RCF file.
How do I save an interim state of my 3D model for comparison before making major changes?
Export the drawing to AutoCAD and save it under the same name with a suffix such as “_ACAD”. You can store this frozen drawing as a reference or keep it with the related files. Do not rename project folders afterward, otherwise reference paths are lost.
When routing, pipes and elbows are combined into a group – how do I make them individual components again?
You want to place pipes and elbows as individual components: Plant 3D can create changes of direction as pipe bends of a bent pipe; a bent pipe is saved as a group. 1. On the Home tab, in the "Part Insertion" panel, check whether "Toggle Pipe Bends" (Pipe Bends) is active and switch it off for normal fitting elbows. 2. In Project Setup, check whether routing with separate components or with bent pipe is set. 3. Bent pipes that have already been routed can be converted into individual components (pipes and elbows) and vice versa. Advantage: you consciously decide whether elbows are created as fittings with welds or as pipe bends without welds.
After drawings have been copied into a new project, Plant 3D reports elements without a reference – what should I do?
If Plant 3D reports elements without a reference after drawings have been copied into a new project, connections to a removed or lost drawing are damaged. Delete these connections and set them again by right-clicking, or remove all drawings and load them again together with their references. Then check the project’s DWG folder.
Why is structural steel missing in my ortho view?
Ortho does not derive external references. For the ortho, use the individual project DWG with the solids instead of an xref. Always insert external references at 0,0 in Plant 3D.
Parts of the model disappear when binding a reference – what should I do?
If parts of the model disappear in Plant 3D 2025/2026 when binding a reference, AUDIT, PURGE, PLANTAUDIT or a new project will not help. Copy the content into a new drawing based on the original Autodesk template (DWT) – binding works there; bound references appear as a block, which you then explode.
When connecting to a vessel nozzle, an error about facing or pressure rating appears – what can I do?
The nozzle must match the line's piping spec in units, pressure rating, facing, and nominal size. Select the nozzle and open Edit Nozzle: set metric, and choose nominal size and pressure rating to match the piping spec. If the nozzle catalog has no nozzle with the required facing, create a suitable nozzle in the nozzle catalog (Nozzle catalog) in the Spec Editor and enter the facing there. If the catalog is located in the shared content folder, it is available to all users. Related support question: “Flange and valve do not connect (property conflict) – may I adjust the valve's pressure rating?” Yes. Pressure rating, facing, and nominal size must match, but the pressure rating is used only for the connection. Set the valve to the flange's pressure rating and leave the actual rating (e.g. PN 40PN – Nominal pressure rating Designation for the pressure rating of flanges and valves (Pressure Nominal), e.g. PN 16. It corresponds roughly to the allowable pressure in bar at room temperature; at higher temperatures, less is allowed. Background and sources ›) in the long description (size) – it appears in all bills of materials.
After inserting a supplied equipment model, the proportions are wrong – my pipes look tiny. What is the reason?
You want to adopt third-party models true to scale: the supplied model is often drawn in meters instead of millimeters. 1. Open the supplied file and check the drawing unit with UNITS or the system variable INSUNITSINSUNITS AutoCAD system variable: sets the drawing unit for inserting, e.g. 4 = millimetres, 6 = metres. AutoCAD uses it to scale blocks and references when inserting. Background and sources ›. 2. If a unit is set, AutoCAD automatically scales blocks and external references to the unit of your drawing when inserting them. If it is set to "Unitless", no conversion takes place – in that case scale the model with SCALE (factor 1000 for m → mm) or request it in mm from the supplying company. 3. Then check the position and size in the model and in the ortho. Advantage: equipment, nozzles and pipes fit together to scale again.
When creating equipment, Plant 3D takes over the values of the last equipment – how do I start fresh?
When creating equipment, choose the “new” variant instead of using the most recently used equipment as a template.
Can the drawing property “Author” be transferred automatically to the iso title block?
Only to a limited extent: the isometric drawing is a pure AutoCAD drawing without a connection to the project database, and the drawing property Author exists only for P&ID, Plant 3D and ortho drawings. General fields such as the Windows login name or the iso title block attributes can be filled automatically; otherwise use a normal attribute to fill in.
Why does the connection pipe style split the line and not show valves?
This is also the case in the Autodesk standard: the spool style is a fabrication instruction and shows only the parts welded together. For a continuous line with all components, use an isometric style.
After exchanging a drawing with a colleague, Plant 3D no longer finds the nozzles – why?
Each catalog part has an internal, unique identifier. If you and your colleague have each created the same part yourselves in your local catalogs, these identifiers differ and the part is not found. In this case you have to place the nozzle again. You can avoid the problem permanently by having all users work with identical catalogs via the Shared Content Folder.
My isometric coordinates should refer to a different plant origin – how do I do that without moving the model?
In the advanced settings of isometric creation, enter an offset position. Alternatively, move the model. Negative prefixes for the coordinate directions can (before version 2024) only be set in IsoConfig.xml.
How do I keep large piping models manageable?
Set up first, then draw: define tags, layers and media, and define the line tags exactly as in the P&ID. Assign line numbers from the start and split the lines into separate drawings by medium (e.g. water, gas). This keeps the individual drawings lean, and you can find every line quickly.
Generating orthos takes a long time – how is it faster in AutoCAD Plant 3D 2026?
You want to generate orthos faster: since version 2026 the “Ortho Generation” dialog box has two options that let Plant 3D skip views. How to proceed: 1. Generate the orthos as usual until the “Ortho Generation” dialog box appears. 2. Activate “Skip views that are already up to date”. Views that are already current are then not regenerated. 3. If required, activate “Skip views with missing models”. Views with missing models are then skipped. 4. Afterwards check the views with missing models: they have not been updated. Re-insert the missing models and generate these views again. Note: Autodesk does not state how much faster it is. Your advantage: Plant 3D only regenerates the views it needs. Background: wish from the Idea Station, idea 12220870 (43 votes, as of 07.11.2026); Autodesk does not state a version in the status of the idea. Source: Autodesk Help, What’s New in AutoCAD Plant 3D 2026, “Ortho Enhancements”. Next step: if your project behaves differently than described, write to support@seitz-ingenieure.de – we will look at it together via remote session.
How do I represent a hose in Plant 3D?
Use a piping spec with a pipe that is designated as a hose. Draw the route as lines or a polyline (the first piece straight) and convert it into a pipe with Line to Pipe. In the bend settings, specify that bends are treated as pipe and select a large bend radius – this creates a continuous, curved hose. If you want to change the route later, keep the sketch line during the conversion and put it on a separate layer.
How do I keep the line number when copying piping?
Set the system variable PLANTCOPYLINENUMBERPLANTCOPYLINENUMBER AutoCAD Plant 3D system variable: determines whether the line number is kept (ON) or not (OFF) when copying from an existing line – in the P&ID and in the 3D model. Background and sources › to ON.
My model with many references becomes sluggish and orthos fail – what should I check?
If a reference is not placed at the common plant origin, all other references will be off and orthos cannot be generated – so insert references at the origin. Avoid multiple overlaid references. Add manufacturer valves to the spec as custom parts, not as references. Keep projects not locally but on a backed-up network drive.
Can I recover the centerline of a routed pipe as a 3D line afterwards?
There is no direct command for this. When creating pipe via Line to Pipe, you can answer No to the question whether the line should be deleted – the centerline is then kept. For lines already routed, the only options are retracing via the vertices or the PCF export: it contains the coordinates of the line points; however, bends are represented only by their intersection points.
Objects end up in the wrong place when placed, e.g. steel beams – could large coordinates be the cause?
Yes. In AutoCAD/Plant 3D, work close to the origin (support recommendation: up to about 100 m distance). In one case, a steel beam was placed correctly only after the reference line was moved to the origin. For isometrics with plant coordinates, an offset can be specified in the advanced settings of isometric creation.
Where do I correctly enter the service of a pipe line in the 3D model so that I do not have to override it on every component?
You want to maintain the service once and see it on all components: piping components and fasteners acquire service, insulation type and insulation thickness from the line group (P3dLineGroup) by default. 1. First assign a line number to the components – only then do they belong to a line group. 2. Enter the service on the line group, e.g. in the Data Manager under Pipe Lines, instead of overriding the value on the individual component. 3. Check in the Data Manager whether all sections have adopted the value. Advantage: if the service changes, all acquiring components and tags based on them adapt automatically.
Message “non-parallel connections cannot be connected” – what does it mean?
Message “non-parallel connections cannot be connected” when moving a flange with its grip: the line has a small offset. Pipes compensate for it within a tolerance, rigid fittings do not – determine the offset with point filters and align the line.
On the isometric, the flow arrow lies behind the pipe line – how do I bring it to the front?
A flow arrow placed as an ISO annotation can lie behind the pipe line on the finished isometric; this cannot be set in the iso style. Select the arrow on the isometric and bring it to the foreground with right-click → Draw Order → Bring to Front.
How do I get a column grid into an ortho view to scale?
Draw the grid from lines and MTextMText – Multiline Text Paragraph text in AutoCAD: multi-line text as one object, with its own formatting per character. Background and sources ›, copy it with “Copy with Base Point”, and paste it at the same point in the model space of the viewport. Thaw the layer that is frozen in the viewport and scale the grid by the scale factor (1:30 → 30). After every ortho update, the layer freezes again – then thaw it again.
How do I model a pipe with a 45° bevelled end as a separate Plant component?
You want to manage a special shape such as a 45° bevelled pipe end as a real Plant component. 1. Model the shape as a 3D solid for each required nominal size and create a block from each. 2. Add connections to the block with PLANTPARTCONVERT (Add, Reverse if necessary, Accept, Exit) and save the drawing immediately. This creates XML and PNGPNG Portable Network Graphics: image format with lossless compression. Background and sources › files in the drawing folder, which you copy along when passing it on. 3. From the converted block, create a block-based component via the Custom Parts window or include it in a catalog and a piping spec. 4. Check the display on a test isometric. This way the component is connected to the line and taken into account in lists.
My isometric is overloaded – how do I get Plant 3D to split a line across several sheets?
You want clear isometrics: 1. When creating the isometric, activate the option "Create Split Points Automatically" – Plant 3D then splits the line across several sheets depending on the drawing complexity. 2. Check the result. 3. So that the split remains the same in later revisions, save the split points in the model in the same session: status bar > isometric drawings icon > "Isometric Creation Results" > "Convert Split Points", select the iso style and line (alternatively the PLANTISOSPLITPOINTSPLANTISOSPLITPOINTS AutoCAD Plant 3D command: transfers the split points of an isometric into the 3D model as fixed points (“Convert split points”). Background and sources › command). Advantage: each sheet remains legible, and the sheet split is reproducible.
Branches without a tee produce a gap in the PCF file (e.g. for pipe stress analysis) – how do I avoid that?
First connect the branch with the same nominal size; the line then extends to the centerline of the main line. Afterward, change only the nominal size of the branch. This way no gap appears in the PCF file.
A drawing has disappeared from Project Manager but is still in Explorer – how do I get it back?
In this state, the drawing cannot be added back to the project. Restore it from the backup. If there is no backup, attach the existing DWG as an external reference to a new project drawing and redraw the content on top of it.
With a custom part, I cannot change the connection data at the second connection afterward – what should I do?
Enter the connection information (nominal size, end type, pressure rating) directly when creating the custom part. Changing it afterward at S2 was a program error of an update in the support case; check whether a newer update is installed.
When creating a new drawing, an error message about the template appears. What is the cause?
Usually the assigned DWT template cannot be reached or is read-only (e.g. missing permissions on the template drive). In Project Setup under "Paths", check the entries for the P&ID and the Plant 3D drawing template and point to an accessible DWT via the three dots. In addition, each folder in the Project Manager can have its own template: right-click the folder > Properties > DWG Template. If the template is corrected only there or only in the paths, the error remains in the other case.
Objects on a hidden layer still appear in my ortho view – what do I check?
You want only the desired objects to appear in the ortho: first check which layer the objects are on. 1. Select the object in the model drawing and read the layer in the Properties palette (Ctrl+1). 2. If it is on DEFPOINTS, move it to a separate layer – DEFPOINTS is a special layer for the definition points of dimensions, is never plotted and is not intended for model objects. 3. Save the model drawing, open the ortho drawing and regenerate the view in the Project Manager by right-clicking > Update View. Advantage: you once again reliably control visibility and plot output via your own layers.
The Data Manager reports an error when importing an Excel list – what should I check?
If the Data Manager reports an error when accepting an imported Excel list, even for individual rows, check the cells for special characters such as single hyphens. After removing them, the list can be accepted.
Plant 3D always crashes at a certain function, e.g. with structural steel commands – what helps?
If the crash occurs reproducibly with the same function, a clean uninstall followed by a reinstall helped in two support cases.
My equipment does not adopt the layer color and cannot be hidden via the layer – what is the reason?
You want equipment to receive its color and visibility via its layer. The cause is usually the underlying solid with a fixed color or its own layer: only objects in the block that lie on layer 0 and are set to ByLayer adopt the properties of the layer on which the block is inserted. 1. Back up the drawing first. 2. Set the source solid to layer 0 and color ByLayer. 3. Create a block from it. 4. Convert it into equipment with "Convert Equipment" (command PLANTEQUIPMENTCONVERTPLANTEQUIPMENTCONVERT AutoCAD Plant 3D command: converts a 3D model made of AutoCAD objects into equipment with nozzles and tag (“Convert Equipment”). Background and sources ›); in the dialog you define nozzles and assign the tag. After that, the equipment follows the layer – also when hiding.
How do I route pipes of different nominal sizes with the same bottom of pipe?
You want to route lines of different nominal sizes, e.g. on a pipe rack, with the same bottom of pipe (BOPBOP – Bottom of Pipe Bottom of Pipe – lower edge of the pipe. Lines with the same BOP rest at the same height on a pipe rack, for example, even with different nominal sizes. Background and sources ›). To do this, change the justification of the routing line. 1. On the ribbon, click Home > Elevation & Routing Line panel > "Center (current justification)". 2. Select a justification at the bottom edge from the list, e.g. "Bottom Left". 3. If necessary, enter a horizontal offset; negative values offset in the opposite direction. 4. Start "Route Pipe" and click the start and subsequent points. The routing line then lies at the selected edge instead of the pipe center. This way all lines rest flush without you having to convert elevations for each nominal size.
The angle specification is missing for olets on the isometric – why?
Check the line number of the olets: it must match the main line. In the support case, the olets had a different number; after matching them, the rotation angles were displayed.
On the isometric, the material number appears as a number (e.g. 14571.00 instead of 1.4571) – why?
This is a software bug that occurred in the support case with update 2026.1.
Is there a tool palette that automatically shows the components of my piping spec?
Yes. The command PLANTDYNAMICTOOLPALETTEPLANTDYNAMICTOOLPALETTE AutoCAD Plant 3D command: creates a tool palette with the components of the current piping spec. Background and sources › creates a dynamic palette with the components of the current piping spec.
Can I freely define the orientation of valve actuators on the isometric?
No. The actuator is displayed only in 90° increments; the actual angle is given alongside. Rotating expansion joints around the pipe axis can likewise not be displayed – indicate the orientation with an annotation or in the order text.
Dimensions in the ortho layout on additionally drawn lines show incorrect values – how do I correct this?
You want to dimension geometry added in the layout true to scale. AutoCAD automatically adapts associative dimensions on model objects in the viewport to the viewport scale; non-associative dimensions, e.g. on lines drawn in the layout, do not receive this adjustment – there the linear scale factor (DIMLFACDIMLFAC AutoCAD system variable: scale factor for linear dimensions: the measured value is multiplied by it before it appears as the dimension text. Background and sources ›) must be set manually. 1. Use LIST on a correct dimension to check which scaling or style override it carries. 2. For the incorrect dimensions, set the linear scale factor to match the scale of the viewport. 3. If you already have a correct dimension, transfer its dimension style to the others with MATCHPROP (Match Properties) and then check the dimension values. This way all dimensions in the ortho layout are correct.
Can I set up the isometrics so that valves are dimensioned end to end?
Yes. Project Setup > Isometric DWG Settings > Set Up Iso Style or dimension settings. In the string dimension section, you can specify for each component type, e.g. for weld or flanged valves, whether dimensions go to the center or end to end. Use "Add" to add missing component types. This is also where you set whether gaskets are dimensioned. The setting applies per iso style – check all styles in use (e.g. for different sheet sizes).
Why does the isometric bill of materials show DN values even though I use inch components?
The isometric bill of materials follows the project unit, not the spec. This cannot be changed.
Eccentric reducers are connected incorrectly on the isometric for some colleagues – why?
In the support case, it was a software bug that has been fixed in the current updates. Bring all workstations to the same, current update level.
Can AutoCAD MEP generate PCF files or isometric drawings?
Not without additional tools; the CADmepCADmep Autodesk Fabrication CADmep: add-on for AutoCAD for designing ventilation, piping and electrical installations with fabrication-accurate components. Background and sources › tools (in the AECAEC – Architecture, Engineering & Construction English for architecture, engineering and construction. At Autodesk this is the name of the “AEC Collection”, which includes AutoCAD with the AutoCAD Plant 3D toolset, Revit and Navisworks. Background and sources › Collection) generate PCF files. Recommendation: design round piping in Plant 3D with a piping spec and isometric, and combine the model as a reference in AutoCAD MEP or in Navisworks.
How do I display the nominal size on the isometric as “DN 50” instead of “50 NS” – or hide it completely?
Open the IsoConfig.xml of the isometric style and search for PropertyChangeScheme Name="Size". Under “Format” you find what appears in which order; under “Field”, which property is inserted for {0}. In the format, replace “NS” with “DN” and put it in front of {0}. If the nominal size should not appear at all, delete that line; the same applies to the elevation.
Weld points are missing on the isometric for elbows other than 90° – what helps?
Open the IsoConfig.xml of the style and, under Themes > Default Theme > Annotations, set the value “BumperDistance” to greater than 0.8 (e.g. 0.9). From version 2016, values up to 0.8 led to missing weld points and faulty isos.
After copying an ortho title block into the ISO style, fields remain empty – why?
If you copy an ortho title block into the ISO style, fields such as sheet number or creator remain empty because the isometric drawing needs its own iso title block attributes. Remap the attributes in the iso title block; fields without a link are normal attributes and are filled in by double-clicking or in the properties.
In one iso style the labeling (e.g. pipeline tag) is wrong and texts rotate when double-clicked – in the other style everything is correct. What is the reason?
You want the same clean labeling in every iso style: a common cause is a text style with a font whose name begins with "@" (e.g. "@Arial Unicode MS"). These fonts are intended for vertical text in Asian languages – Latin text is displayed rotated with them. 1. In the affected iso style, check the text style of the labeling (STYLE command) and assign a font without "@", e.g. isocpeur or Arial. 2. Each iso style has its own folder with its own settings (including isoconfig.xml); changes in one style do not apply to the others. If the tag definition is missing, take it from the working style – first back up the existing file by renaming it. 3. Then generate a test iso and check the tag and texts. Your advantage: consistent isometrics in all sheet formats.
All my pipes end up on layer 0. How do I set up automatic layer assignment?
In the Project Manager, open Project Setup > Plant 3D DWG Settings > Layer and Color Settings. Use “New” to create a setting, e.g. assign layers by line number (tag) and color by layer, and set it as current. For supports, “Same layer as pipe” is recommended. Note: The change can be applied to all open drawings – test it on a copy first. A prerequisite is that every line has a line number. Related support question: “My pipes are all on layer 0 even though layer by line number is set – why?” The layer follows the line number: without an assigned number, the line ends up on layer 0. Assign the numbers e.g. in the Data Manager under Areas > Piping (the magnifier jumps to the object) – the layer changes automatically. Under Plant 3D DWG Settings > Layer and Color Settings, check which setting is current, and apply changes to all open drawings with “Set as current”. Tip: set up first, then draw; if necessary, assign provisional numbers.
The Excel table for the iso title block is not recognized or keeps getting detached – what should I do?
If the Excel table (LDT) for the isometric title block is not recognized or keeps getting detached, check the attribute file of the title block: if it contains a large number of unnecessary entries (in this case several hundred), clean it up – the table is then read in again.
Insulation used to be on its own layer; in the current project it is on the layer of the pipe – where do I set this?
You want the insulation back on its own layer: this is not a project setting but the system variable PLANTINSULATIONUSEPARTLAYERPLANTINSULATIONUSEPARTLAYER AutoCAD Plant 3D system variable: determines whether the insulation is on the pipe's layer (1) or on its own layer (0). Background and sources › (Plant 3D 2023 and later). It is stored in the registry and applies per computer or user profile – after a new installation, a version change or on another workstation it is back at the default 1 (insulation on the layer of the pipe). 1. Enter PLANTINSULATIONUSEPARTLAYER on the command line and set it to 0. 2. So that color and transparency come from the insulation layer: PLANTINSULATIONCOLORPLANTINSULATIONCOLOR AutoCAD Plant 3D system variable: sets the colour of the displayed insulation; 256 = ByLayer. Background and sources › = 256 and PLANTINSULATIONTRANSPARENCYPLANTINSULATIONTRANSPARENCY AutoCAD Plant 3D system variable: sets the transparency of the displayed insulation; -1 = ByLayer. Background and sources › = -1 (default values). 3. Plant 3D creates the layer
After changes to the isometric style, Plant 3D only produces errors – what should I do?
Create a new isometric style based on a working style and adjust it slightly.
How do I display angle valves correctly on the isometric?
Angle valves need the iso symbol type VALVE-ANGLE and a matching SKEY, because they work differently from straight-through valves. The actuator direction cannot be set freely – port S2 is always below the actuator.
The slope triangle is dimensioned incorrectly on the isometric – can I hide the dimensions?
Yes. In the IsoConfig.xml of the style, search for “NonSkewAngleTolerance” (default 1.5) and set it to 0 – the dimensions of the slope triangle are then no longer displayed. Afterward, check the display of the bend.
Since I inserted a weld list into the isometric style, no more isometrics are created – what helps?
Remove all tables (bill of materials, weld list, etc.) from the isometric style and place them again. In the support case, isometric creation worked again afterward.
My iso bill of materials is too long for the sheet – is the bill of materials or the isometric split?
You want to define what happens with an overly long bill of materials: this is controlled by the table overflow in the isometric style. 1. Project Setup > Isometric DWG Settings > Set Up Iso Style, select the style. 2. Under "Table Overflow", choose whether the table data overflows onto a new drawing sheet or whether the isometric is split into two smaller isometrics. The option is only available for the "Isometric" drawing type, not for spool drawings. 3. Regenerate the isometric. If that is not enough, set split points specifically in the model. Advantage: the bill of materials and drawing remain legible and match the way of working in fabrication and installation.
A coupling or another asymmetrical component is displayed rotated on the isometric – what should I do?
In the configuration file in the “Isometric” project folder, add a line at the bottom of the “ASYMMETRIC COMPONENT LISTASYMMETRIC COMPONENT LIST Section in the AutoCAD Plant 3D isometric configuration: list of components with different connections (e.g. flange on one side, weld end on the other). Each line contains the iso type, SKEY and the end types at S1 and S2. Background and sources ›” with the Iso TYPE, SKEY, and the end types at S1 and S2. The S1/S2 order must match Port1/Port2 of the Iso symbol.
How do I show a custom identification on the isometric drawing instead of the tag?
If your own identifier should appear on the isometric instead of the tag, replace the Tag property with your own property for the relevant annotation in the iso style.
My Project Manager or other windows stay invisible – how do I reset the Plant 3D profile?
First back up your settings. Then delete the folders “Autodesk AutoCAD Plant 3D
How do I customize the title block, layers and lineweights of the isometric – and why don't the pipes adopt the lineweight from the layer?
Project Setup > Isometric DWG Settings > Title Block and Display > "Setup Title Block". The isometric template opens: the green area is the drawing area, the blue one the bill of materials area. The title block must be named "TitleBlock", otherwise it is missing in the preview. Isometrics use fields instead of attributes. In the Layer Manager you define colors and lineweights, e.g. so that pipes are displayed thicker than valves. If the pipes do not adopt the lineweight from the layer, check the current lineweight in the open template: set the system variable CELWEIGHTCELWEIGHT AutoCAD system variable: sets the lineweight of new objects; -1 = ByLayer, -2 = ByBlock, -3 = Default. Background and sources › to -1 (ByLayer), save the template and regenerate the isometric. The template is read in again each time the isometric is regenerated; orthographic drawings, by contrast, are not subsequently adapted to a changed template.
Isometric drawings cannot be generated and the log remains empty – will a reinstallation help?
For inexplicable errors (e.g. an isometric cannot be created, the log remains empty), a clean reinstallation often helps: uninstall completely and remove leftover folders, download fresh from the Autodesk account, install individually without an image or software distribution, temporarily disable the virus scanner, install AutoCAD first, then the other products, then all updates. The Windows account used for the installation needs write permissions on drive C:.
How do I adjust the frames around Iso annotations, e.g. so that the circle around the valve tag grows with it?
Under “Edit isometric symbols”, you change the “Anno…” blocks in the Block Editor. From version 2016, the frame shape and size adjustment can also be set under “Annotations”. For other cases, use IsoConfig.xml: styles prefixed with “S” (e.g. SWipeCircle) adapt to the content; first create the style under “AnnotationStyles” and then enter it in the ComponentScheme instead of “WipeCircle”.
How do I add an additional dimension on the isometric, e.g. across pipe and flange?
In the IsoConfig.xml of the isometric style, create a new filter with the elements “Pipe” and “Flange”. Then copy an existing AnchorPoint completely, rename it, and enter the new filter.
How do I pass wall thicknesses to the pipe stress analysis via PCF, and what interferes with the import?
In the iso.atr of the isometric style, add “EngineeringItemsWallThickness” as the last line (with a line break); component properties belong under BOM-ATTRIBUTES, project, drawing, and line group properties under ATTRIBUTESATTRIBUTES Section of the AutoCAD Plant 3D attribute file Iso.atr: it contains the project, drawing and line group properties for isometric and PCF output. Component properties are under BOM-ATTRIBUTES. Background and sources ›. The PCF contains end connections (END-CONNECTION-PIPELINEEND-CONNECTION-PIPELINE Entry in a PCF file: the line ends at this point at another pipeline. Some stress analysis programs cannot read these entries. Background and sources ›) that disturb some stress analysis programs – remove these sections in an editor before importing.
Why do some column headings in the Data Manager and in the Excel export carry the property name as a suffix (e.g. “Description-…”)?
You want clear column titles: The titles in the Data Manager and in the Excel export come from the display names of the properties. If custom properties have the same display name as existing ones (e.g. “Description”, “Type”), Plant 3D appends the property name to distinguish them. In the project configuration, assign unique display names (e.g. “Drive description”), reopen the Data Manager, and export again.
How do I have pipes automatically colored or placed on layers by piping spec or fluid?
Open Project Setup > Plant 3D DWG Settings > Layer and Color Settings. Create an assignment via New, e.g. by piping spec or fluid, and assign colors or layers; then set it as current. The rule applies to newly drawn objects and when the underlying property changes. For fluids, a separate, maintained fluid list must exist. If you use layers by fluid, also plan layer filters in the drawing template (DWT), otherwise the layer list quickly becomes confusing.
I can no longer place a bill of materials in my ortho drawing – what helps?
The ortho template is probably damaged. Take the supplied original ortho template (DWT) and copy your title block and border into it. Build new ortho drawings on this template.
A custom property is not annotated on the isometric despite being entered in the iso style – why?
If a custom property (e.g. on pipe supports) is not annotated on the isometric drawing despite an entry in the iso style, check the property name: an underscore in the name prevents the output. Create the property again without an underscore (e.g. SupportX instead of Support_X), and the annotation will appear.
The file names of my isometrics are cryptic – where do I define them?
The file name format of the isometrics is defined in Project Setup. If it is not defined, a cryptic name results.
How do I set up custom nozzles or manholes for nozzle selection?
In the content folder, under “CPak Common”, open the Nozzle Catalog.acat in Spec Editor and add the desired nozzle and manhole sizes. They then appear in the nozzle selection window.
Where can you see how the line number of a pipeline is composed in Plant 3D?
You find the tag format in Project Setup under Plant 3D DWG Settings → Plant 3D Class Definitions → P3DP3D Short form for AutoCAD Plant 3D, e.g. before class names in the project setup (“P3D line group”). Background and sources › Line Group, Tag Format section. The default tag of the line group is the line number; further parts such as fluid or unit can be added. When routing, you choose nominal size and piping spec in the “Assign Tag” dialog and enter the line number. A new tag format only takes effect once it is selected as the default value in the “Tag Format Name” property.
I added an attribute to a block, but it does not appear – e.g. on the isometric. Why?
Existing block references do not automatically adopt new attributes. After changing the block, run the ATTSYNCATTSYNC AutoCAD command: applies changed attributes of a block to all places where this block is inserted. Background and sources › command for that block; the attributes are then present in all insertions.
Valves of different sizes appear on one line in the iso bill of materials – how do I separate them?
In the TableSetup, add the column “Long Description (Size)”, group the bill of materials, and enter “PartSizeLongDesc” as the grouping column in the IsoConfig.xml.
Fields in the Iso title block stay empty – what is the cause?
Every property that is to appear in the Iso.dwt, in annotations or in dimensions must be entered in the Iso.atr: project, drawing and line group properties under ATTRIBUTES, component properties under BOM-ATTRIBUTES.
How does Plant 3D calculate the insulation weight of a component automatically instead of just entering a default value?
You want the weight of the insulation per component without manual work: create a calculated property. 1. Project Manager → right-click the project → Project Setup → Plant 3D DWG Settings → Plant 3D Class Definitions → Piping and Equipment → appropriate class (e.g. Pipe) → Add; select "Calculated" as the type, format Double (the property name without spaces). 2. In the expression, convert text values to numbers with ToNumber and round with Round. Pipe (cut length in mm, weight per meter in your field
For some components the "Status" property is empty instead of "New" – how do I fix this?
You want all components to carry a valid status: 1. Open Project Setup and, in the class definitions of the affected component class, check the default value of the "Status" property. 2. If "New" is not entered there, override the default value and set it to "New". 3. For components that have already been drawn, create a view with the "Status" column in the Data Manager, search for the empty values and fill them in collectively, e.g. by exporting to Excel and then importing. Back up the project first. Advantage: reports and filters that evaluate by status capture all components again.
My changes to the isometric XML file are gone again after a restart. Why?
Plant 3D rewrites the configuration files on exit. Therefore close Plant 3D before you edit XML files in the project folder "Isometric" with a text editor. Save in the editor with Ctrl+S and close the file or the tab in the editor so that the change is really written to disk. Only then restart Plant 3D and regenerate the isometric.
How do I change the isometric symbol of a valve or create my own actuator symbol?
Project Setup > Isometric DWG Settings > Symbols and References > "Edit Isometric Symbols". In the Block Editor, open an existing symbol, save it under a new, unique name with "Save Block As", then modify it. The connection points (Port 1, Port 2 …) and, for valves, CP and Operator must be preserved – their names are evaluated. The assignment of symbol key (SKEY) to block is made in the XML file in the project's "Isometric" folder. Each code may only occur once; the first entry found wins.
How do I get the support tag onto the isometric?
In the IsoConfig.xml of the style, under ComponentScheme, find the “Static annotations” and, in the section “PipeRunComponent DataSolver generated property schemes (start)”, add an annotation with Filter="Support" and Fields="TAG" (e.g. Alignment="FlatHorizontal", LeaderStyle="Always"). The AnnotationStyle (WipeCircle, Standard, Diamond) determines the frame.
The designation appears twice in the isometric bill of materials – why?
In the table setup of the bill of materials, both long description and description are probably included as columns or rows. Remove one of the two fields in the isometric style.
On the isometric of an insulated line, "Insul" or "Not Insul" appears – how do I suppress this note?
You want to control the insulation notes on the isometric: the note comes from the "InsulationLimit" property schema of the isometric style, which labels the insulation limits. If it is not wanted for technical reasons: 1. Close Plant 3D and first back up the IsoConfig.xml of the isometric style used in the "Isometric" project folder. 2. Delete the "InsulationLimit" property schema in the file. 3. Save and close the file, start Plant 3D and regenerate the isometric. Advantage: the setting applies to all isometrics of this style – there is no need to delete the note manually on every finished isometric.
An instrument sitting directly on an olet gets no item number on the isometric – why?
In the project configuration, under Isometric DWG Settings › Themes › Branch, disable the option “Offline Instrument Connection”. After that, an instrument seated directly in the olet also receives a part number.
How do I get the operating pressure and temperature of the line group into the valve list?
Create properties on the valves that receive these values from the line via an acquisition rule, and run PLANTREFRESHACQPROPERTY. They are then available in the Report Creator.
AutoCAD (85)
How do I send a drawing with all external references without losing links?
Use eTransmit. It packages the drawing with its external references so that the links are preserved for the recipient.
Why does the cursor jump in fixed steps (e.g. 2.5 mm) or not snap to endpoints – and how do I switch this off?
That is grid snap. Check in the status bar which aids are active (blue): F7F7 Function key in AutoCAD: shows or hides the grid. Background and sources › only displays the dot grid, F9 (snap mode) actually makes the cursor jump to the grid points, F8F8 Function key in AutoCAD: turns ortho mode on or off (drawing only horizontally and vertically). Background and sources › toggles Ortho, F3F3 Function key in AutoCAD: turns object snap on or off. Background and sources › object snap. For work on object points, turn snap (F9) off and object snap (F3) on – then endpoint, midpoint and intersection work cleanly again. Set the spacing via right-click on the snap icon > "Snap Settings" (e.g., snap 2.5, grid 5), and the snap points via the arrow next to the Object Snap button. Disable object snaps you don't need (in P&ID, however, "Nearest" and "Perpendicular" are useful). To choose a snap mode for the next click only, use Shift + right-click, e.g., "Center" or "Mid Between 2 Points".
I can neither select nor edit objects – what is the cause?
The objects are often on a locked layer. Open the layer control (Layer Properties Manager), unlock the affected layer using the lock icon, and try the edit again.
How do I transfer content to a new drawing at exactly the same position?
Use “Copy with Base Point” (Ctrl+Shift+C) and specify 0,0,0 as the base point. In the new drawing, also paste with Ctrl+V at 0,0,0 – the position remains identical. For supplied floor plans, an external reference is often better: you work in your own drawing and leave the original unchanged.
The plot preview remains empty or reports an unusual plot configuration – what can I do?
No valid printer is assigned to the layout. Right-click the layout tab > Page Setup Manager > Modify. Under Printer/plotter, select e.g. "DWG To PDF.pc3", check the paper size and plot area (e.g., Layout) and confirm. The preview will then work. If colors print in black, this is due to the selected plot style table. Recommendation: output to PDF first, check it, and only then print on paper.
The hatch appears solid black – what is the cause?
The spacing of the hatch lines is too small relative to the drawing; the lines are so close together that the area looks filled. Select the hatch and increase the scale (e.g., 5 or 10) in the contextual tab or in the properties; you also set the angle there (e.g., 45°). If "Associative" is active, the hatch adapts automatically when the boundary changes.
My dashed line is displayed like a continuous line – what can I do?
The dash lengths are too small relative to the drawing size. Open Format > Linetype, click "Show details" and increase the global scale factor (e.g., tenfold). This factor applies to all linetypes in the drawing. Alternatively, use the Layer Properties Manager (Linetype column > Load) to load a variant of the linetype with larger dash spacing.
How do I arrange objects in a circle or in a row?
For a circular arrangement: Home > Modify > "Polar Array" (drop-down under "Rectangular Array"), select objects, Enter, specify the center point – most reliably via Shift+right-click > Center. In the contextual tab, set the number of items and the fill angle. For a straight row, the COPY command also offers an Array option after the base point: enter the number, Enter, then specify the distance to the second item.
What is the difference between window and crossing selection?
If you drag the selection from left to right (window, solid frame), only objects that lie completely within the frame are selected. If you drag from right to left (crossing, dashed frame), all objects touched by the frame are also selected. After selecting, check on the command line how many objects were found.
How do I set a fixed scale in a viewport that is retained when zooming?
Click the viewport frame in the layout (outside the viewport, not in the active model space), open the Properties palette and set "Standard scale" to e.g. 1:1. Then set "Display locked" to "Yes". Double-click inside the viewport to edit, double-click outside to exit. To change the view, the lock must first be set back to "No".
Why does a click extend or replace my previous selection – and how do I set this?
This is controlled by the PICKADDPICKADD AutoCAD system variable: determines whether each clicked object is added to the selection (1, default) or replaces the previous selection (0). With 0, only the Shift key adds. Background and sources › system variable, which can also be set via right-click > Options > "Selection" tab (option "Use Shift to add to selection"). The default is PICKADD = 1: every object you click is added to the selection. With PICKADD = 0 or the option enabled, a new click replaces the selection; add further objects while holding Shift. This protects against accidental deletion, the Properties palette shows unique values instead of "*VARIES*", and you can, e.g., check only the gasket or bolt set of a flange connection. When dragging a window: from left to right, only fully enclosed objects are selected; from right to left, all objects touched.
How do I place my model to scale in a layout and lock the view?
Switch to the layout tab and create a viewport (e.g. rectangular) via the Layout tab by dragging two corners. Double-click into the viewport, adjust the view with pan/zoom, then double-click outside it. Select the frame and choose the scale in the status bar or in the Properties window. Set "Display Locked" to Yes there – then the scale and view are retained when you zoom.
My drawing is empty or overwritten – can I get the old version back?
In the same folder, look for the .bak file with the same name, copy it and rename the copy to .dwg. You may find older versions in the backup or via the Drawing Recovery Manager.
How do I bring a finished layout with a drawing frame into another drawing?
Right-click a layout tab at the bottom > "From Template…". In the dialog, select DWT or "Drawing (*.dwg)" as the file type, open the file with the layout you want and select the layout. You can then delete layouts you do not need by right-clicking. Alternatively, layouts can also be dragged into the drawing via the DesignCenter.
How do I rotate a line and keep the original (copy while rotating)?
Start the ROTATE command (short form RO), select the object and confirm with Enter. Specify the base point (e.g. the center via object snap) and then select the "Copy" option on the command line. Only then enter the rotation angle, e.g. 15 or -15. Caution: base both rotations on the original line – if you rotate the already rotated copy by -15° again, you end up back in the starting position.
How do I get an AutoCAD table into Excel?
You want to reuse the data of an AutoCAD table in Excel. To do this, export the table as a CSV file. 1. Enter TABLEEXPORT in the command line (German: TABELLENEXPORTTABELLENEXPORT AutoCAD command (German: TABELLENEXPORT): saves an AutoCAD table as a CSV file, e.g. for further work in Excel. Background and sources ›). 2. Select the table. 3. Enter a name in the file dialog and save the CSV file. 4. Open the file in Excel, format it as required and save it as XLSXXLSX Microsoft Excel file format from version 2007. Background and sources ›. Advantage: you do not have to type in any values and can sort, filter and pass on the data in Excel.
How do I dimension several dimensions cleanly on one line (continued dimension)?
First create a linear dimension (Annotate > Dimension > Linear). Then choose the "Continue" command (DIMCONTINUE) in the same group, click the base dimension if necessary, and then simply click the further points. All dimensions are then aligned at one height. End the chain with Enter or Esc.
Small blue symbols appear while drawing and objects move together – what is that?
These are geometric constraints that the "Infer Constraints" function in the status bar creates automatically. If you then move an object, connected objects move with it. Turn off the button in the status bar if you do not want this. Select existing constraints (e.g., with a window around the symbols) and delete them with the Del key.
How do I pick a specific snap point such as tangent, center or midpoint without changing the snap settings?
Start the command first (e.g. Line or Move). When AutoCAD asks for a point, hold down the Shift key and right-click in the drawing area. In the context menu, select the snap you want (Tangent, Center, Midpoint, Intersection …). This snap applies only to the next click. For Center, it is enough to briefly move the cursor over the circle or arc.
How do I prevent the viewport frame from being printed?
In the Layer Properties Manager, create a separate layer for viewports, give it e.g. a light gray color and deactivate the printer icon in the "Plot" column. Then put the viewport frame on this layer via the Properties window. The frame remains visible while you work but appears neither in the plot preview nor in the printout.
How do I set up my interface once and save it permanently – even across a change of workspace?
1. Select a workspace (e.g., "Drafting & Annotation" or "3D Modeling") and display the menu bar and palettes as desired. 2. In the status bar, use the icon with the three lines ("Customization") to turn on all status indicators so you can see what is active. 3. Use the gear icon (Workspace Switching) to select "Save Current As…". Tip: keep the original name and append your initials (e.g., "P&ID ISO – XY", "3D Piping – XY") so you can tell later whether it is the 2D or 3D workspace. Without saving, customizations such as the displayed menu bar are lost when you switch workspaces – save and overwrite again after every further change. Workspaces can also be exported, e.g., when changing computers; you change the order of the Quick Access icons via "More Commands…" in the "Customize User Interface" dialog.
My AutoCAD is installed in English – do I have to reinstall it to use German?
No. Download the German language pack for your version from Autodesk and install it.
Why are hatches and fills displayed only as outlines in one drawing but filled in others?
You want to see hatches, fills and wide polylines filled again. The fill display is controlled by the system variable FILLMODEFILLMODE AutoCAD system variable: determines whether hatches, fills and wide polylines are shown filled (1) or only as outlines (0). Background and sources ›; it is saved in the drawing and can therefore be set differently in each drawing. 1. Enter FILLMODE in the command line and set the value to 1. 2. Run REGEN (or REGENALLREGENALL AutoCAD command: regenerates the display of the drawing in all viewports. Background and sources › for all viewports) so that existing objects are redisplayed. Advantage: the drawing appears as intended again – this also applies to P&ID drawings, e.g. with hatched areas. Conversely, the value 0 can speed up work on very large drawings.
Why does the spacing of the gray grid lines not match the snap spacing I set?
The displayed grid adapts automatically when zooming – the visible line spacing says nothing about the snap. What counts are the values in the snap settings (arrow next to the Snap button > Snap Settings). Turn the grid on and off with F7, snap with F9. Tip: first draw a line of known length from 0,0 and zoom to it by double-clicking the mouse wheel – then you are working in a sensible view.
How do I join individual lines into a polyline, and how do I break it up again?
Enter PEDITPEDIT AutoCAD command: edits polylines. It can, for example, turn single lines into a polyline and join them into a closed profile. Background and sources › (Edit Polyline) and select a line. Confirm the prompt asking whether to convert it to a polyline with Yes. Then choose the "Join" option, click the other lines and finish with Enter. Only segments whose endpoints meet exactly are joined. To break it into individual parts, use the EXPLODE command.
The "Tools" or "Format" menus or the Model/Layout tabs are missing – how do I show them?
Menu bar: in the Quick Access Toolbar (top bar), click the small drop-down arrow and select "Show Menu Bar" – menus such as File, View, Format and Tools are then available again. The workspace selection can also be shown from the same drop-down. Tabs: right-click in the drawing area > Options > "Display" tab > enable "Display Layout and Model tabs"; this is also where you can change the color scheme (light/dark). Then save the workspace so that the setting is retained.
I confuse the Block Editor and the drawing, and objects accidentally end up in the block – what helps?
Under Options > Display > Colors, set different colors for the drawing background and the Block Editor. That way you can see immediately where you are working. If something ended up in the block by mistake, close the Block Editor without saving and reopen the drawing.
My layout prints only small in one corner of the sheet – what is wrong?
In the support case, a layout viewport had been shifted. Align the viewport with Zoom Extents and plot at a 1:1 scale.
No preview images are displayed for my DWG files in Windows Explorer – what can I do?
You want to recognize drawings by their preview image in Explorer. The preview is written to the drawing when saving; this is controlled by the system variable THUMBSAVETHUMBSAVE AutoCAD system variable: determines whether a preview image is written into the drawing when saving (1) or not (0). The image is shown e.g. by Windows Explorer and the Open dialog. Background and sources › (which replaced the former variable RASTERPREVIEWRASTERPREVIEW AutoCAD system variable: controls whether a preview image is written into the drawing when saving. Newer versions use THUMBSAVE for this. Background and sources ›). 1. Set THUMBSAVE to 1 in the drawing. 2. Save the drawing. 3. In the Windows folder options on the View tab, check that "Always show icons, never thumbnails" is deactivated. 4. If the preview is still missing, check whether DWG files are opened via the AutoCAD DWG Launcher. Advantage: you find drawings faster without opening them.
Instead of a file dialog, AutoCAD now only asks for the file name on the command line – what happened?
The system variable FILEDIA is set to 0. Enter FILEDIA and set the value to 1; the file dialogs will then open again.
The same drawing is output incorrectly as a PDF on my computer but not on my colleague's – what is the cause?
Often caused by a different update level. Compare the program versions and install the missing updates. In the support case, the problem was resolved afterward.
How do I create holes in a solid?
Create the holes as separate solids (e.g., cylinders) in the correct position. Then Home > Solid Editing > "Subtract": first select the base solid, Enter, then select all solids to be subtracted, Enter. Combine parts that belong together into one solid beforehand with "Union". Tip: keep a copy of the subtraction solids aside in case something needs to be corrected later.
Why can't I dimension a diameter or radius?
Radius and diameter dimensions only work on circles and arcs. Select the arc or circle directly – the point you click also determines the position of the dimension line. If a diameter appears instead of a radius, you can switch to the corresponding option on the command line. Lines, hatches or section edges cannot be dimensioned this way; if a hatch lies over the edge, select the line specifically.
How do I get a centerline (dash-dot) for axes into my drawing?
In the Layer Properties Manager, click the "Linetype" column of the centerline layer and then "Load…". For metric drawings, select the file acadiso.lin and, in it, e.g. the linetype "CENTER" or "CENTER2". Load with OK, select the linetype and assign it to the layer. By default only "ByLayer", "ByBlock" and "Continuous" are available; all other linetypes must be loaded first. Alternatively, you can reach the selection via Format > Linetype.
How do I show functions in the status bar, and how can I tell whether they are active?
Click the "Customization" button (three horizontal bars) at the far right of the status bar. A check mark in this list only means that the button is visible in the status bar. Whether the function itself is switched on is shown by the button: highlighted in blue = active. Click it to switch the function on or off. Tip: show as many buttons as possible – then you see immediately when something unwanted is active.
In my drawing, texts are only visible as frames – how do I get the text back?
You want texts to be displayed legibly again. Quick text mode is probably active: AutoCAD then only displays and plots a rectangular frame instead of the text. 1. Enter QTEXTMODEQTEXTMODE AutoCAD system variable for quick text: with 1, AutoCAD shows and plots texts only as boxes, with 0 as full text. Background and sources › and set the value to 0. 2. Run REGENALL so that existing texts are redisplayed. Advantage: texts appear completely again in the drawing and printout. Conversely, the value 1 can speed up work on very large drawings – reset it before plotting.
Which printer is suitable for PDF output of a layout?
Right-click the layout tab > "Page Setup Manager" > Modify. "DWG To PDF.pc3" has proven itself as the printer/plotter; external PDF printers are often slower. This is also where you define the paper size (e.g. ISO A4ISO A4 – Paper size A4 according to ISO 216 Sheet size 210 × 297 mm from the A series according to ISO 216 (in Germany DIN EN ISO 216). Each A size is obtained by halving the next larger one. Background and sources ›, possibly "Full Bleed" for borderless printing), orientation, plot area and scale.
How do I change the height or radius of a cylinder or cone afterwards?
Click the solid and open the Properties palette (Ctrl+1 or right-click > Properties). For primitives such as cylinder, cone or wedge, values like height, radius, length or width can be edited directly there. Alternatively, you can drag the grips (arrows) on the selected solid and type in a value. After a union or subtraction, these parameters are no longer available.
What is the difference between the TRIM and BREAK commands?
With TRIM, you simply click the parts to be removed up to the next cutting edge. With BREAK, you select an object and specify a defined first and second point; the section in between is removed, even without a cutting edge. For circles and arcs, this works counterclockwise. "Break at Point" splits an object at a point without removing anything.
How do I create a new layer, and why shouldn't I draw on layer 0?
Open the Layer Properties Manager via Home > Layers and click "New Layer". The new layer takes over the settings (color, linetype) of the layer currently selected, which you then adjust. Layer 0 is always present in every drawing and can be neither renamed nor deleted; it is better to draw parts, axes and dimensions on separate layers with meaningful names. Important: set the layer you want as current before drawing – forgetting this is the most common mistake.
How do I join two lines cleanly into a corner – and why does FILLET sometimes cut off the wrong side?
Start FILLET, select "Radius" on the command line and enter 0. Click each of the two lines on the side that is to be kept – not on the protruding ends. AutoCAD extends or trims both exactly to the intersection; if you click on the wrong side, you keep the wrong piece. For real fillets, enter the radius you want, e.g. 5. The value remains stored for further fillets – so check it before each use. Press Space or Enter to repeat the last command used.
Why are my dimensions tiny or wrongly aligned?
Usually a dimension style without suitable settings is active (e.g. "Standard" instead of ISO). Check the font under Format > Text Style, and under Format > Dimension Style > Modify check the arrow and text size, the text alignment and, under "Primary Units", the precision. The least effort is to work from the start with a suitable template (DWT) in which the dimension and text styles are already set up correctly.
How do I bring over layers, blocks or layouts from another drawing without creating them again?
Use the DesignCenter (Ctrl+2 or Tools > Palettes > DesignCenter). There, select the source drawing under "Open Drawings" or via "Folders", open e.g. the "Layers" entry and drag the entries you want into the drawing area of the current drawing. Blocks, dimension styles, text styles and layouts can be brought over in the same way.
I can no longer see my drawn objects, or everything is tiny – how do I find them again?
Double-clicking the mouse wheel zooms to all objects in the drawing. If everything looks tiny, there are usually individual objects far away: Ctrl+A shows you everywhere something is selected; delete anything drawn far away by mistake. Hold down the mouse wheel to pan the view. The coordinate display in the status bar shows where the crosshairs currently are.
Why shouldn't I simply move objects by drag and drop?
When dragging with the mouse, the object is placed where you release it – this is imprecise, and later dimensions or snap points will be off. Use MOVE or COPY (CO) instead: select the object, press Enter, snap the base point with object snap, then snap the target point or indicate a direction with F8 (Ortho) and type the distance. Ctrl+C/Ctrl+V is also unsuitable for exact positioning.
My drawing is rotated or no longer at 0,0 – how do I get back to the standard view?
In the ViewCube (top right in the drawing area), click "Top" to get back to the 2D plan view. Below it, set the coordinate system in the drop-down back to "WCS" (World Coordinate System), or alternatively use the UCS command with the "World" option. Double-clicking the middle mouse button zooms to the extents so that all objects become visible. If objects are far from the origin, move them precisely with MOVE using coordinate input.
The "ISO-25" dimension style is missing from my drawing – how do I get it?
Additionally open a new drawing based on an ISO template (e.g. acadiso.dwt). In the DesignCenter (Ctrl+2), select this drawing under "Open Drawings" > "Dimstyles" and drag "ISO-25" into your drawing. Then set it to "Current" under Format > Dimension Style. Note: an existing style with the same name is not overwritten. Switch existing dimensions to the new style via the Properties palette.
A layout only plots in gray – what should I check?
In the Plot dialog (Ctrl+P), check the plot style table: it must not be “Grayscale” or “Monochrome”. Use the button next to it to open the Plot Style Table Editor (Form View), and for comparison try the plot style table “None”.
How do I fill the title block automatically with title, author, etc.?
Many title blocks use fields that refer to the drawing properties. Open File > Drawing Properties and enter title, subject, author, keywords and comments there. To see which field shows which value, double-click the field in the Block Editor. Fields are updated, among other occasions, when saving or regenerating (REGEN). Advantage: these values can also be searched for in Windows Explorer.
How do I load a LISP routine (.lsp) in AutoCAD so that it is available every time it starts?
Save the .lsp file in a fixed folder. Run the APPLOADAPPLOAD AutoCAD command: loads add-on applications such as LISP programs (.lsp) into the current session (“Load Applications”). Background and sources › command (Load Application), select the file and click "Load" – it is then available for the current session. To load it permanently, add it in the same dialog via "Startup Suite > Contents…". Routines that modify coordinates (e.g. setting Z values to 0) usually work in the current UCS – set the UCS to "World" beforehand and check the drawing before saving.
How do I print many drawings at once, even if not every drawing has a page setup?
Via batch plotting (PUBLISH): add drawings and import the print settings (page setup) for all sheets. This prints all drawings in one pass with the same settings.
Error message "Valid hatch boundary not found" when hatching a view – why?
Hatches are created in the XY plane of the current UCS. If the contour lies in a different plane (e.g. the front view of a 3D model), AutoCAD cannot find a boundary. Align the UCS with the view (UCS command, "View" option, or "Coordinates" group > "View"; if necessary, set the UCS origin on the contour) and hatch again. Also check whether the contour is really closed.
How do I specify which properties AutoCAD displays as quick properties when hovering over an object?
Enter the command CUIABI – Customize User Interface (CUI) AutoCAD command (German: ABI): opens the “Customize User Interface” editor for ribbons, toolbars, shortcut keys and quick properties. Background and sources › and open the “Quick Properties” section. There, check for each object type which properties are displayed.
Why can't my contour be extruded, or why is only a surface created?
The boundary must be a closed polyline (or region). Use PEDIT to select a line, confirm the prompt "Convert to polyline" with Enter, choose the "Join" option, select all adjacent segments and press Enter; if necessary, also "Close". If a gap remains (e.g., an incorrectly filleted corner), not everything is joined – clean up the corner with FILLET radius 0. Then run EXTRUDE and check in the Properties palette whether a 3D solid was created.
Can I use a Navisworks model (NWD) as a reference in AutoCAD and edit it there?
You want to use a Navisworks model as the basis for your design in AutoCAD. NWD and NWC files are attached as a coordination model; they cannot be edited in AutoCAD. 1. Select Insert > Reference > Attach (English: COORDINATIONMODELATTACHCOORDINATIONMODELATTACH AutoCAD command: attaches a Navisworks model (NWD or NWC) as a coordination model, e.g. to design to it with exact dimensions. Background and sources ›) and the NWD or NWC file. 2. Define the path type, insertion point, scale and rotation. 3. If necessary, turn on object snap to the model with CMOSNAPCMOSNAP AutoCAD system variable: turns object snap to an attached Navisworks model (coordination model) on or off. Background and sources ›; use CMFADEOPACITYCMFADEOPACITY AutoCAD system variable: controls how transparent an attached Navisworks model (coordination model) is displayed, value 0 to 100. Background and sources › and CMFADECOLORCMFADECOLOR AutoCAD system variable: controls how strongly the colours of an attached Navisworks model (coordination model) are faded, value 0 to 100. Background and sources › to control the fading. 4. If you need different sections, create them in Navisworks as separate NWD files; save NWFNWF – Navisworks working file Navisworks file that only references the original files and contains viewpoints, clash tests and comments. Background and sources › files as NWD beforehand. Advantage: you design precisely against the model without changing it. Prerequisite: AutoCAD (not LT) with hardware acceleration active.
Suddenly I can no longer save my drawing – what could be the cause?
You want to save your drawing as usual. A common cause: a reference edit (editing a block or external reference in place) is still active – as long as it is running, saving is not allowed. 1. Watch for the message in the command line that the command is not allowed during reference editing. 2. End the reference edit with REFCLOSE and decide whether the changes to the reference are saved or discarded. 3. Then save the drawing. Advantage: changes to the block or reference are cleanly applied or deliberately discarded.
How do I create 2D views with visible and hidden edges from a 3D solid?
Option 1: create a viewport in the layout, double-click into it, set the view via the ViewCube (WCS), then run the SOLPROF command, select the solid and answer the prompts (hidden profile lines on separate layer, project onto plane, delete tangential edges) with Yes. This creates layers PV-… (visible) and PH-… (hidden); then switch off the solid's layer (and the PH layer if required). Option 2: Layout tab > Base > "From Model Space" creates base and section views automatically.
How do I make frames in model space and in the layout match exactly?
Copy the frame geometry in the layout with Ctrl+Shift+C and base point 0,0 and paste it in model space with Ctrl+V at 0,0. Then select the viewport in the layout, set the scale to 1:1 in the properties and set "Display Locked" to Yes. This way, model and layout match to the millimeter, and annotation blocks at the frame edge (e.g. an equipment strip along the bottom edge) lie exactly within the plot frame. This setup is done once in the template.
How do I create a STEP file from a DWG with 3D solids or from a Plant 3D model?
You want to pass on a 3D model as STEP. AutoCAD and Plant 3D do not export STEP directly. First export Plant 3D models to AutoCAD in the Project Manager by right-clicking (Export to AutoCAD) so that solids are created. Option A: 1. Open the drawing in AutoCAD Mechanical (included in the AutoCAD including specialized toolsets subscription). 2. Enter _STEPOUT and save the STEP file. Option B: 1. Save the drawing in AutoCAD with EXPORTEXPORT AutoCAD command: saves the drawing or selected objects in another file format, e.g. IGES or SAT. Background and sources › as IGESIGES Initial Graphics Exchange Specification: vendor-neutral exchange format for 2D and 3D CAD data. Background and sources › (or SATSAT File format of the ACIS 3D modelling kernel. AutoCAD uses it to pass solids to Autodesk Inventor, for example. Background and sources ›). 2. Open the file in Inventor. 3. Select Export > CAD Format and, in the "Save As" dialog, the STEP format. Advantage: the other party receives a neutral 3D format that common CAD systems can read.
How do I output the coordinates of 3D solids as an Excel list?
First convert the 3D solids to blocks. Then start Tools > Data Extraction (if necessary, display the menu bar via the arrow in the Quick Access Toolbar), create a new extraction, select the drawings, check only “Blocks”, and as properties select the “Geometry” category – it contains the coordinates. At the end, select “Output data to external file” and specify an Excel file as the destination.
Fillet edge or chamfer edge does not select the edge I want – what helps?
Start "Fillet Edge" or "Chamfer Edge" and set the values before selecting the edge ("Radius" or "Distance" option; enter both distances). For edges that run all the way around, use the "Loop" or "Chain" option and cycle with "Next" to the right edge, then "Accept". Finally, press Enter several times to apply the fillet. Filleting across several solids only works after a union. If there are display problems, REGEN and the "Conceptual" visual style help.
Suddenly AutoCAD no longer prints or reports an invalid plot configuration – what could be the cause?
Check the plotter configuration (PC3PC3 AutoCAD plotter configuration file: contains the printer or plotter, paper sizes and output settings. Background and sources › file). In the support case, it had been overwritten; after restoring it from the local storage location, printing worked again.
How do I change all elements of an array at once afterwards?
An array is associative. Select it and choose "Edit Source" in the contextual tab (also available via right-click), then click an element. Change this element, e.g., the length of a line, and then click "Save Changes". The change is automatically applied to all elements of the array.
My dimension texts are tiny or look different than expected. How do I set up a suitable dimension style?
Open Format > Dimension Style (or the arrow at the bottom right of the Annotate > Dimensions panel) and create your own style with "New…". Check the arrow size, text height and text style (e.g. an ISO font), the decimal separator "Comma" and the suppression of trailing zeros. Click "Set Current" for the style. Change existing dimensions via the Properties palette in the "Dim style" field. Differences between two workstations are almost always due to differing style settings.
What is the difference between text, attribute and field in a title block?
Normal text is fixed in the block. Attributes (Insert > Define Attributes) are placeholders whose value you fill in per drawing by double-clicking after inserting the block; they can also be invisible and read out as a list via data extraction. Fields read values automatically, e.g. from the drawing properties or the file name.
How do I transfer additional toolbars from a CUIX file I was sent?
Enter _CUI on the command line or choose Tools > Customize > Interface. At the top, switch to the Transfer tab. On the right, open the CUIXCUIX Customization file of the AutoCAD user interface with ribbons, toolbars, menus and shortcut keys. Background and sources › file using the "Open customization file" icon. Under Toolbars, select the entries you want (Ctrl for multiple) and drag and drop them onto the Toolbars node on the left. Confirm with Apply and OK. The toolbars appear on the main screen and can be docked to the edge. Then save your workspace.
How do I build a dynamic block that optionally shows a varying number of elements (e.g. a table with 1–4 chairs)?
A polar array cannot be controlled directly as an action in the Block Editor, because actions only work with parameters. Arrange the elements, explode the array with EXPLODE and add a visibility parameter. Create visibility states such as “1 chair” to “4 chairs” and hide the unneeded elements in each state. Optionally, make the block rotatable on insertion.
My block has an awkward insertion point – how do I correct it afterwards?
Open the block via right-click > Block Editor. The origin 0,0 in the Block Editor is the insertion point. Select all objects, start MOVE, snap to the point you want (e.g. Shift + right-click > "Mid Between 2 Points") and enter 0,0 on the command line at the bottom. Then "Close Block Editor" and save the changes. Better: when creating the block, specify the base point right away via "Pick point".
How do I snap to the midpoint between two points or the centroid of a contour?
While a command is asking for a point: Shift+right-click > "Mid Between 2 Points", then click the two points. For the centroid there is the "Geometric Center" snap. It only works on closed polylines or continuous contours – join individual lines beforehand with PEDIT > Join.
How do I rotate a line so that it points to a specific point and keep the original?
Start the ROTATE command, select the object, specify the base point. In the command line, first choose the "Copy" option (so the original is kept) and then "Reference". Now indicate the reference angle with two points on the object (e.g., midpoint and endpoint) and then snap to the target point (e.g., the center of a circle). Work in the WCS or the appropriate UCS, otherwise an invalid angle is reported.
How do I place an object at exactly the height (Y value) of another point?
Use point filters: when prompted for a point, enter .Y (period on the keyboard, then Y) and click the point whose Y value is to be used. AutoCAD then asks for the remaining coordinates (X/Z); click another point for this or enter @ for the last point. .X and .XY work the same way.
Why do some dimensions show a yellow exclamation mark, and how do I reassociate them with the object?
You want your dimensions to be associative again and change with the geometry. The yellow exclamation mark is an annotation monitor marker: the dimension has lost its connection to its object, e.g. after a block was redefined. 1. Click the marker on the dimension. 2. In the menu, select DIMREASSOCIATEBEMREASSOZ AutoCAD command (German: BEMREASSOZ): reassociates a dimension with points on objects so that it follows changes again. Background and sources › (German: BEMREASSOZ). 3. Reassociate the dimension with the desired object points. Advantage: the dimension adapts automatically to changes again. If you only want to hide the markers, set the system variable ANNOMONITORANNOMONITOR AutoCAD system variable: turns the annotation monitor on or off. It flags dimensions that have lost their association with their object; 0 = off. Background and sources › to 0.
How do I change all texts or dimensions of a drawing at once?
Open the Properties palette (Ctrl+1) and click "Quick Select" at the top right. Select "Entire drawing", as the object type e.g. "MText", "Text", "Rotated Dimension" or "Radial Dimension", operator "Select All" and confirm with OK. You can then change e.g. the text height or the dimension style for all selected objects at once in the Properties palette.
AutoCAD freezes when saving to the server or a cloud storage, but everything works locally – what can I do?
The delay occurs at the storage location. Have IT reduce scanning by antivirus software and firewall for the CAD storage locations, or work locally.
Subtract with a polar array does not work – why?
An array is a compound object, not a solid. Explode it first: select the array and run the EXPLODE command. The elements are then individual 3D solids and can be subtracted from the base solid with "Subtract".
How do I transfer walls from a point cloud into an Inventor model?
We recommend recreating the building envelope as wall objects on the cropped point cloud using AutoCAD Architecture (or Revit). Adjust the baseline, width and height of the walls in the properties and place doors and windows at the detected locations. For Inventor, export the result as solids, e.g., SAT or IGES; IFC is also possible. The building envelope then serves as a reference in Inventor.
How do I get drawing frames and plot-ready layouts into my template?
Open the DWT and the DesignCenter (Ctrl+2). From there, bring over layouts, blocks and layers from existing drawings by drag & drop. Alternatively, create a new layout, insert the frame block at 0,0 and set the following in the Page Setup Manager: printer "DWG To PDF", suitable paper size, plot area "Window" via the frame corners – this is more reliable than "Extents". Create oversize formats as a custom paper size in the plotter properties. Layers created in the template are taken over by Plant 3D with their properties.
How do I find system variables that differ from the default?
The SYSVARMONITOR command lists the monitored system variables. A warning symbol in the “Status” column indicates that the value does not match the one preferred by Autodesk; the question mark gives you the explanation of the variable.
How do I create a floor plan with wall outlines from a point cloud in AutoCAD?
Attach the point cloud via Insert > Point Cloud. In the Point Cloud Manager, you can show and hide regions defined in ReCap. Then crop the point cloud, e.g., to a narrow horizontal section at a height where there are few pipes and machines. Using the function for generating section lines, AutoCAD derives lines from it on which you can construct walls. Edges, corners and centerlines can also be extracted from the point cloud.
Why does my point or line end up in a completely different place than expected (relative or absolute)?
This depends on dynamic input (status bar). If it is active, subsequent points are interpreted relative to the last point – as if preceded by an @. If it is off, e.g., 100,0 in the command line is an absolute coordinate in the current UCS, relative to the origin 0,0; you then force relative input with a leading @ (e.g., @100,0; on a German keyboard AltGr+Q). The first point of a command is always entered as absolute. With dynamic input active, use the Tab key to switch between length and angle; it works in the pointing direction – a negative value draws opposite to the displayed direction.
How do I draw to the intersection of two lines that do not even touch?
Use the "Apparent Intersection" object snap: during a command (e.g. LINE), hold down the Shift key, right-click and select "Apparent Intersection" in the object snap menu. Then click the two lines one after the other – AutoCAD calculates the point at which they would intersect if extended. Important: press the Shift key and the right mouse button at the same time.
After importing new licenses, workstations do not receive a network license – what do I check on the license server?
You want all workstations to reliably receive a network license. Check the license server in this order: 1. Version: install the current version of the Network License Manager – newer product versions often require a newer license server. 2. Configuration: in LMTOOLSLMTOOLS Management program of the FlexNet license server (lmtools.exe) for network licenses, including Autodesk's: set up, start and stop the service and query its status. Background and sources ›, on the "Config Services" tab, check the paths to lmgrd.exe, to the current license file (.lic) and to the debug log file, and save the service. 3. Start and status: start the server under "Start/Stop/Reread" and run a status enquiry under "Server Status"; "license server UP" and "adskflex: UP" must appear. 4. Firewall: open TCP 27000–27009TCP Transmission Control Protocol – network transport protocol. “TCP 27000–27009” gives the port numbers that the firewall must open for the license server. Background and sources › (lmgrd.exe) and TCP 2080 (adskflex.exe) on the server. Advantage: you find the cause systematically instead of checking workstations one by one.
Can we still manage our Autodesk licenses via our own license server (network license)?
You want to manage your licenses centrally: your own license server is no longer the way to do this. Autodesk has not sold subscriptions with multi-user access (network licenses) since 2020, and existing ones can no longer be renewed. This is how you manage centrally today: 1. In Autodesk Account (manage.autodesk.com), under User Management › By product, select the collection or product and assign the person with “Assign users”. 2. When someone changes, release the seat with “Unassign” and assign it to the new person – as often as needed. 3. For products that someone only needs on individual days, use Autodesk Flex in addition: prepaid tokens, charged per product and per 24 hours of use. Your advantage: no server of your own and no server maintenance – the license follows the person.
How do I specify which template (DWT) a new drawing starts with?
In Options, on the "Files" tab, expand "Template Settings" and assign the template you want (e.g. acadiso.dwt) under "Default Template File Name for QNEW". For companies, a shared profile with uniform paths to templates, plot settings, etc. is recommended so that all workstations behave the same way.
How do I remove thousands of backup files from a project folder without selecting them individually?
Create a text file with the delete commands, save it as a .cmd or .bat file, and run it in the top level of the folder. Caution: The script acts on all subfolders – including synchronized cloud folders. Files of currently open drawings are retained. Test the script on a copy first.
Navisworks (66)
What is the difference between NWF and NWD?
The NWF contains references to the source files and all coordination data and reloads changed sources; the NWD is a frozen model state that can be passed on.
What is the difference between saving and publishing an NWD file?
Saving writes the file, which stays open in Navisworks. Publishing creates an NWD file that is not opened afterwards but is ready for sharing; you can also set additional options. For sharing with external parties, publishing is recommended; simple saving is more for internal use.
Which version does the Plant 3D Object Enabler depend on?
It depends on the installed Navisworks version, not on the Plant 3D version.
How do you transfer your settings to other workstations?
In the Options Editor, save the settings as a file with Export… and load them on the other workstation with Import…; for a binding standard, create a locked global options file.
How do I combine many Plant 3D drawings into an overall model without a cumbersome Xref collective drawing?
You want to view and check the overall model of a plant smoothly. Instead of loading all DWGs as references into a collective drawing, combine them in Navisworks. 1. Click Home > Project > Append or press Ctrl+A. 2. Under file type, select DWG, select all required drawings (Shift/Ctrl) and click Open. Do not drag files into the Selection Tree and do not use "Open" – that creates a new file instead of appending. 3. Save the result as NWF: it contains only links to the original files and stays small; an NWD contains the entire geometry and is suitable for passing on. This way you navigate the whole model, set viewpoints and check for clashes.
Why should models not be moved in Navisworks without documentation?
Otherwise, measurements and clashes will no longer be correct after the next replacement of the source file.
What needs to be done after installing the Object Enabler?
Move the existing NWC files to an archive folder and append the model again. Navisworks then regenerates the NWC files with the Object Enabler – it only replaces existing NWC files if the source file is newer.
How can commands be called from the keyboard without knowing a shortcut?
Press Alt – Navisworks displays KeyTips on the commands; then press the key shown.
Why should only one import strategy be selected when appending DWG files in Navisworks?
If individual discipline DWGs and a master drawing with XRefsXRef – external reference Another drawing that is only linked in AutoCAD, not inserted permanently. Changes to the original appear on the next load. Background and sources › are mixed, duplicate objects are created – clash tests then report components clashing with themselves.
Where is a clash found during coordination fixed?
Always in the source model (e.g. Plant 3D); the model is then refreshed in Navisworks.
When does Navisworks regenerate an NWC file?
When the source file is newer than the existing NWC file.
What else does a published NWD contain besides the model?
The saved viewpoints – they can be called up directly after opening.
Can I set the third person to be shown by default when navigating?
Yes. Open Options and select the viewpoint defaults under Interface. In the collision settings, you can have Third Person activated automatically and also select the figure (avatar) there. The setting then applies to newly created viewpoints.
How do you bring a change saved in Plant 3D into the Navisworks model?
Home tab → Project panel → Refresh.
How do I show my Navisworks model to a customer without a CAD program?
Upload the NWD file to Autodesk Drive (drive.autodesk.com) and share it via a link. The recipient opens the model in the web browser, with no installation.
When walking, the avatar is red and I cannot move on – what can I do?
Under Walk, enable the Collision, Gravity and Third Person options. If the avatar is shown in red, it is stuck, e.g., in the floor or in an object. Move the view up slightly, and you can then continue walking normally. When walking, you move with the left mouse button; the middle mouse button pans the view.
Which key opens the Options Editor?
F12F12 Function key: in Autodesk Navisworks it opens the global options, in AutoCAD it turns dynamic input at the cursor on or off. Background and sources › (Global Options).
Which setting creates duplicate objects when discipline DWGs are appended individually?
Convert reference files (load XRefs as well) in the DWG/DXFDXF Drawing Interchange Format: Autodesk exchange format for drawings that other CAD programs can also read. Background and sources › file reader.
How do you save a section permanently?
Via Save Viewpoint; without a saved viewpoint, it is lost when you switch views.
Where do you turn on ambient occlusion?
Options Editor → Interface → Display (Autodesk System) → Autodesk → Screen Space Ambient Occlusion.
Why do clashes that were already resolved reappear after re-running the test?
When you use the Compact command, clashes with the status Resolved, Approved or Reviewed are removed from the list. The next time the test is updated, Navisworks detects these locations as clashes again. Therefore, set deliberately accepted clashes to Approved and leave them in the list instead of compacting. After changes to the model, updating shows which clashes have been resolved and which are new.
How do you achieve a smoother camera animation?
Use more viewpoints and select Synchronize Angular/Linear Speeds as the smoothing option.
Where is a redline visible?
Only in the viewpoint in which it was drawn.
In which order does Navisworks evaluate NOT, AND and OR?
NOT before AND, AND before OR; the conditions are evaluated from left to right without parentheses.
Which render mode shows only the visible edges with opaque surfaces?
Hidden line.
How do you move only the gizmo without moving the object?
Hold down the Ctrl key and drag the sphere in the center of the gizmo.
Why should new viewpoints be renamed immediately?
They are initially named ViewX; only a name that follows a naming convention makes them easy for others to find.
The clash test returns hundreds of irrelevant hits – how do I reduce them?
Use the test rules: for example, ignore items on the same layer, in the same group/block, in the same file or with coincident snap points. Also create search sets and test trade against trade in a targeted way; remove insulation or supports from the group as needed. Very small penetrations in the millimeter range can be sorted and set to Approved all at once. A good folder structure and consistent layer naming make this much easier.
How do I create and distribute a clash detection report?
In Clash Detective, switch to the Report tab, select the statuses you want (e.g. only New and Active) and the format. The HTML report or HTML (Tabular) is the most readable; XML is better suited for further processing. With the Viewpoints format, the clashes are saved as viewpoints including comments and can be shared with an NWD file. You can assign clashes to a person with a comment using Assign.
What happens when you click a corner of the ViewCube?
The view switches to a three-quarter view defined by the three adjacent sides of the model.
What is the difference between the Hard and Clearance test types?
Hard reports penetrations above the tolerance; Clearance already reports items closer than the tolerance, even without contact.
Can someone who receives only the NWD see the clash detection results?
Yes, via viewpoints. First work through the results in the NWF and delete anything irrelevant or set it to Resolved or Approved. Then create a report in Viewpoints format, selecting only the desired statuses (e.g. New, Active). The viewpoints created this way contain the comment on the clash and are included when the NWD is published.
Why should you not continue working in the NWD file after “Save As”?
The source files are frozen in it; refreshing no longer fetches new versions – open the NWF again.
Which status does a fixed clash receive after a refresh and a new test run?
Resolved. The test is closed only after a technical re-check.
My Navisworks file (NWF) no longer updates even though the DWGs were changed in the cloud – why?
Check the paths of the source files in the NWF. After an update of Desktop Connector, the local path to the cloud projects changed in the support case; the NWF no longer found the files. Re-attach the files in the NWF or adjust the paths.
How is the quantification takeoff data structured?
WBSWBS – Work Breakdown Structure Work Breakdown Structure: breakdown of a project into sub-tasks. In Navisworks TimeLiner, tasks can be ordered by it. Background and sources › groups → elements → objects → resources.
What do you do if an older Navisworks version is used on the receiving side?
When exporting, save the NWD in the file format of an older generation.
What does an extraction radius of 0 do?
All links are visible, regardless of their distance from the camera.
Which link categories can you choose yourself when adding?
Hyperlinks, labels and custom categories; Navisworks assigns the others automatically.
What is the difference between “Rebuild Task Hierarchy” and “Synchronize”?
Recreate imports the entire structure and overwrites the existing one; Synchronize updates only the data and keeps the structure.
Why are clash tests based on search sets instead of selection sets?
Selection sets are fixed and do not update; search sets are re-evaluated with every model change.
What belongs in the acceptance check before handover?
No missing sources, control points match, search sets return the expected hits, tolerances documented, viewpoints and issues clearly named, NWD independently checked, revision and check date documented.
How do I combine, for example, all insulation into one group for clash detection?
Open Find Items and define a condition, e.g. Item > Name contains the term you want. Find All selects the objects. Then save the search as a search set in the Sets window. Search sets are updated automatically when the model changes and are available in Clash Detective as Selection A or B. For a better overview, you can also assign transparency to the objects.
The switchback from Navisworks to AutoCAD/Plant 3D does not work – what is missing?
The prerequisite is that the Navisworks exporter plug-ins are installed.
What is the difference between Append and Merge?
Append adds geometry and data without checking for duplicates; Merge removes duplicate content.
What are the two ways to create a camera animation?
Quickly via saved viewpoints or a recorded navigation, or with more control in the Animator using keyframes.
Which data taken over from the CAD application can be changed in Navisworks?
Only color, transparency and links. You add your own data via a User Data tab.
Is there anything to consider when passing on an NWD to stakeholders using Navisworks Freedom?
No. If the NWD is displayed correctly in Navisworks (Object Enabler installed, all objects as solids), it looks exactly the same in Freedom. The NWD no longer depends on Plant 3D.
What is the difference between exporting viewpoints and the viewpoints report?
The export transfers the viewpoints (XML) to another model; the report (HTML) documents image, name and comment for stakeholders without Navisworks.
Why are the supplied catalogs often unsuitable for plant engineering?
CSI-16CSI Construction Specifications Institute (USA). CSI-16 and CSI-48 are breakdowns of construction work according to MasterFormat with 16 and 48 main divisions; Navisworks offers them as templates for quantity take-off. Background and sources ›, CSI-48 and Uniformat come from North American building construction; for plants, a custom catalog is usually more suitable.
What is the difference between a search set and a selection set?
The search set is a saved rule and is re-evaluated with every update; the selection set is a fixed selection of specific objects.
What do you use to check the published version before handover?
Open the NWD yourself, ideally in Navisworks Freedom, and go through the acceptance check: no missing sources, control points are correct, search sets return the expected hits, tolerances are documented.
Navisworks becomes very slow with the point cloud – how can I make it run more smoothly?
The point cloud should only be referenced in the NWD file; if it is embedded, the file grows enormously. Load the complete RCPRCP Autodesk ReCap project file: combines the individual scans (RCS) of a laser scanning project with their registration. Background and sources › project only once so that the views of the scan positions are adopted, and then remove it again. Instead, load the regions exported in ReCap (RCSRCS – ReCap scan file Scan file of Autodesk ReCap. Several RCS files together form a ReCap project (RCP). Background and sources › files): one larger RCS file is displayed much more efficiently than many individual scans. Hide parts you don't need via right-click > Hide.
What happens to viewpoints, sets and tests during a refresh?
They are retained in the NWF; only the changed source files are re-read.
In the date format for the CSV import into TimeLiner, what is the difference between MM and mm?
MM is the month (two digits), mm the minute (two digits).
How do you display a specific property as a tooltip without selecting the object?
Turn on Quick Properties (Home → Display) and add the property under Options → Interface → Quick Properties → Definitions.
How many section planes are possible at the same time?
Up to six.
In Navisworks, Plant 3D objects are displayed only as wireframes – what should I do?
Set the render type in the Navisworks options to “Shaded”. In the support case, the Object Enabler and update alone did not help; additionally install all pending updates.
Which format string reads a date such as “05.03.2027 14:30” in the CSV import into TimeLiner?
The format string is dd.MM.yyyy HH:mmdd.MM.yyyy HH:mm Placeholders in the date format: dd = day, MM = month, yyyy = year (each with leading zero), HH = hour (0–23), mm = minute. Upper and lower case matter. Background and sources ›.
How do I set up a meaningful clash test in Clash Detective?
In Clash Detective, add a test and select Selection A and Selection B – e.g., drawing against drawing or search set against search set. As the type, choose e.g. Hard; use Clearance with a tolerance, e.g., 50 mm, to check installation or insulation clearances. Do not enable Self-Intersect for piping models, since adjoining components produce hundreds of unnecessary hits. Confirm entries with the Enter key and run the test.
How do I show only the important properties of an object when I click it?
In Options under Interface > Quick Properties > Definitions, you specify which categories and properties appear as quick properties, e.g. line number, piping spec or material. When you hover over an object, exactly these values are then displayed. The properties themselves come from the source application – for Plant 3D, e.g., from Project Setup – and cannot be shortened in Navisworks.
Why does every tolerance, with its justification, belong in the inspection documentation?
Too large a tolerance can suppress genuine clashes; the justification makes the check traceable.
Which point is the center of rotation when rotating with the measuring tool?
The second of the three picked points.
What is the Expires option used for when publishing?
It sets an expiry date so that nobody continues working with an outdated version.
What should be set before the first CSV import?
Date format and CSV encoding – incorrectly read date values shift the entire schedule.
Where is the TimeLiner data stored?
In the project file (NWF), not in the model files.
ReCap Pro (38)
After the import I see hardly any points – what could be the reason?
The most common cause is an incorrectly detected input unit. In the import settings, check under Advanced whether meters or millimeters is set. If millimeters is set, a range filter of 40, for example, is interpreted as 40 mm instead of 40 m and almost all points are filtered out. Correct the unit, confirm changed values with the Enter key and import the scans again in a new project.
For IT security reasons, our workstations may only save to network drives. How can I still work smoothly with large point clouds?
Provide a dedicated point cloud computer with sufficient local SSDSSD – Solid State Drive Fast data storage without moving parts. Background and sources › storage and access it via Remote Desktop. The data then stays local on that computer, while you work from your own workstation.
Where should I save a new ReCap project, and what should I watch out for with the project name?
Create the project folder yourself in Explorer beforehand – unlike Plant 3D, ReCap does not create its own project folder. Under New > Project from file import, enter a name and then select this folder. Work on a local SSD drive if possible; network drives are much slower, and you should avoid folders synchronized with cloud storage. Avoid umlauts and special characters in names to prevent problems during import and sharing.
How do I add more scans to a project that has already been registered?
Open the project and select Import. You return to the import page and can add the additional scan folders by drag and drop. Check the import settings (unit, filters) and start the import. Then select Continue Registration so that the new scans are matched to the existing ones, and complete the process with indexing.
The export from the FARO software to ReCap does not work – how can I still get the scan project into ReCap?
You want to continue processing FAROFARO Maker of laser scanners (FARO Technologies); “Focus” is its scanner series. Background and sources › scans in ReCap. ReCap reads FARO data directly; an export from the FARO software is not necessary. FLSFLS – FARO scan file Single scan file of a FARO laser scanner. Background and sources › scans and the FARO project formats FWSFWS – FARO SCENE workspace Project file of older versions of the FARO software SCENE. Background and sources › and LSPROJLSPROJ – FARO SCENE project Project file of newer versions of the FARO software SCENE. Background and sources › are supported. 1. Create a new project in ReCap. 2. Import the FARO project file or the scans; for FLS scans always import the complete scan folders, not just the individual file. 3. Let ReCap process the data and check the result. Advantage: you save the intermediate step and work directly with the original data.
I imported only the scan file and the result is unusable – what went wrong?
With many terrestrial scanners (e.g. .fls format), each scan comes with a folder containing additional structure and the image information. So import the complete scan folders, not just the individual file. The most reliable way is to drag and drop the folders from Explorer onto the target area in the import window. ReCap converts the data into its own RCS format during import.
How do I check whether my computer is suitable for point cloud processing in ReCap?
Under Settings > System, at the very bottom, you will find the Info section with details on the graphics card, memory and processor. For import, registration and indexing, a powerful multi-core processor and plenty of memory are important. Because a large amount of data is written, the project should be on a local SSD. For mesh models, a higher number of usable processor cores speeds up the calculation considerably.
Can I open the project while ReCap is still indexing?
We advise against it. Only indexing completes the registration – until then, the data is held only in a temporary cache. If you choose Launch Project before indexing reaches 100%, ReCap may hang or crash. So wait until the progress bar is complete and all RCS files have been written to the project's support folder.
Which values should I choose for decimation and filters during import?
Decimation thins out the point cloud to a minimum spacing: the larger the value, the faster but also the more incomplete the result. For small piping, a few millimeters (about 1–2 mm, no more than 5 mm) make sense; alternatively, turn decimation off completely. The noise filter (e.g., aggressive) removes interference such as people walking past. Use the range filter to limit the range, e.g., for indoor spaces to the area actually needed.
How do I create a surface model (mesh) from a point cloud for use in other programs?
Save the project and start mesh creation. In the following dialog, select the scanner type used, a high quality setting (needed for piping so that round geometry is preserved) and the number of processor cores. The calculation is very compute-intensive and can take hours. You export the finished mesh, e.g. as an FBXFBX Autodesk exchange format for 3D models with meshes, textures and animations. Background and sources › file; it is usually much smaller than the point cloud and can be reused in Navisworks or Inventor.
When do I use window, fence or plane?
Window for compact, clearly delimited areas; Fence for irregularly shaped or angular areas; Plane for a continuous surface such as a wall or floor – even if objects stand in front of it.
How do I reduce a large scan project to a few scans without damaging the original?
Save the registered and aligned project to a new folder with Save As. In this copy, delete the scans and regions you do not need, including their content. The old RCS files are then still in the support folder, however – only another Save As of the cleaned-up copy really reduces the data. Then delete the intermediate versions. Do not delete anything in the master project; only hide it.
The model looks coarse and incorrectly textured in the browser. Did the processing fail?
No. The web viewer shows only a low-resolution proxy. Download the mesh – it is high-resolution and correctly textured.
What is the difference between an Aerial and an Object project?
Aerial uses images with geotag data and GCPGCP – Ground Control Point Ground control point: a point with known coordinates on site that is marked on the images. It makes a model from photos true to scale and correctly positioned. Background and sources › coordinates; the model is scaled and georeferenced, and a GeoTIFF is also possible. Object uses images without geotag data and delivers a textured mesh, but no GeoTIFF.
Why is the GeoTIFF output missing for Object Project?
The images have no geotag data and there are no GCPs – a georeferenced orthophoto is therefore not possible.
How much should the photos for a photo project in ReCap overlap?
By 60–80 %. For aerial images, the overlap is especially critical for the result.
Does Smooth change the number of mesh nodes?
No. Smooth evens out irregularities and flattens the mesh; the number of vertices remains the same.
How can I tell whether the registration of my scans is good enough?
After registration, ReCap shows a registration report with the scans and their overlap. Connections marked green are fine; with overlaps of more than about 50% you usually get good results, lower values are marked yellow or red. Also check visually, e.g. from above, whether walls and edges lie exactly on top of each other.
How many ground control points (GCPs) do I need for an Aerial Project?
At least three. Each GCP is marked on at least four images.
When do I compute the mesh locally, and when in the cloud?
Locally for small to medium-sized projects, without Flex tokens. Cloud processing consumes Flex tokens and requires a signed-in Desktop Connector with a connected cloud drive.
Which output do I choose when processing an Aerial Project – RCM, RCS or GeoTIFF?
RCMRCM Autodesk ReCap mesh file, e.g. the textured 3D mesh from photos or drone images. Background and sources › for a textured mesh (presentation, context model), RCS for further processing as a point cloud in ReCap Pro or AutoCAD, GeoTIFF for a georeferenced orthophoto (site plan, background image).
What is the difference between survey points and “Update origin”?
The survey point calculation affects the registration; “Update Origin” sets the origin and orientation of the entire project manually. The two tools are independent of each other.
Can I measure angles in RealView?
No. In RealView you can only measure distances; you measure angles in the 3D view.
How do I export only part of the point cloud as a separate file?
Define the desired region, e.g., via limit box and selection, and hide all other regions – only visible regions are exported. Then choose Export, set the point spacing (dense, e.g., 1 mm) and save the file. The result is a pure RCS point cloud without scan positions that loads much faster. Since the origin is preserved, all exported regions are correctly positioned relative to each other in other programs.
Do I have to re-register individually exported areas when I merge them again?
No. They can be imported back into a common project or referenced in AutoCAD; the original position is retained.
How do I divide a large point cloud into regions, e.g. rooms or levels?
Use the selection tools (window, fence, plane) to select points and define a new region from them. With the plane tool, ReCap detects surfaces such as walls; select points that are as far apart as possible for this. Points that do not belong can be deselected and removed. In the project navigator (bottom right) you can see all regions and scan positions, group scans by dragging and show or hide regions.
In which unit do I enter the coordinates of the survey points?
In meters.
Do I have to type in each survey point individually?
No. With “Upload survey points” you import a TXTTXT Plain text file without formatting. Background and sources › file with lines “Name X Y Z” or “Name North East Elevation”.
Why should I change the perspective so often when taking photos for a photo project?
This covers blind spots, captures more of the object and improves feature matching between images.
When does automatic registration work reliably?
When each scan position could be captured from the previous one (line of sight between the stations).
Can I define a separate origin for individual derived subprojects (e.g. for each hall bay)?
Technically yes. However, the subprojects will then no longer match and produce incorrect positions when combined. So define the origin once in the overall project and keep it for all derived projects.
Do I have to remodel classified mesh objects in Revit?
Not necessarily. With the ReCap plug-in for Revit, you insert classified mesh objects directly as Revit families.
Can I restore permanently deleted points?
Only as long as the project has not been saved again via “Save As”. Therefore save intermediate states normally.
How do I align the point cloud with the plan and define my own origin?
First disable perspective in the display settings. Then enable the origin there and select Update Origin. Click the desired origin, e.g., a building corner, and then align the X-axis with a wall surface (toggle between surface and axis alignment with the Ctrl or Alt key). The Z direction results from gravity and should not be changed; you can set the Z height, e.g., to the floor. Check the result in plan view.
Which insertion point do I choose when attaching the point cloud?
Usually 0,0,0 – provided the point cloud is already correctly referenced and aligned in ReCap.
Some scans were not registered automatically – how do I assign them manually?
Select the unregistered scan and a neighboring scan for manual registration. In both views, place the same point on three surfaces with different orientations, e.g. two opposite walls and one perpendicular to them. Avoid glass, curved objects such as vessels and moving parts such as doors. Use the intensity display to check whether someone walked through at that spot. Then merge the scans, accept the result and index.
Can I align the origin with a grid coordinate from my floor plan?
Yes. Select Update Origin again, snap to the reference point in the point cloud and enter the X, Y and Z coordinates that this point has in your plan. The point cloud is then moved so that it is correctly positioned relative to the floor plan. If possible, define the origin once in the master project and do not change it afterwards – otherwise derived projects and exports will no longer match.
Is Autodesk Docs still available as a destination for ReCap projects?
Yes. Autodesk Docs and ACCACC – Autodesk Construction Cloud Autodesk cloud platform for design data and collaboration; called Autodesk Forma since 24 March 2026. Background and sources › remain valid destinations with a full point cloud viewer; Forma Data Management is also available. Autodesk Drive on its own offers only a simple file preview.
Inventor (53)
Why does the parts list show only the subassemblies and not all individual parts?
The Structured view shows only the first level, i.e. each subassembly as one item. With the Parts Only view, Inventor lists all individual parts from all subassemblies.
Why does the BOM still show the old number after a file has been renamed?
The part number in the iProperties (Project tab) is taken from the file name when first saved and is not updated when renaming. The BOM reads only this part number – correct it in the part’s iProperties.
Can I drag sketch lines in Inventor directly to points of the point cloud and snap to them?
No. Inventor is not designed for this. Create planes from the point cloud, bring edges into the sketch with Project Geometry and model on that basis.
What is the presentation animation worth using for?
For assembly and for discussions with the client or management: the animation shows step by step how the assembly is put together, even to people without CAD knowledge. For the manufacturing drawing, the snapshots are sufficient.
How can I tell that a nozzle is functionally anchored in the Inventor model?
Its position refers to a functional dimension, e.g. the vessel height, and moves along sensibly when the length changes.
Why is it not enough simply to omit a manhole for the stress analysis?
An open opening makes the vessel non-calculable. The substitute manhole closes the pressure shell and restores the stiffness.
Why does the length of the flat pattern differ from the expected circumference?
Inventor calculates the flat pattern length using the K-factor of the unfold rule in the sheet metal style. It defines where the neutral axis lies within the sheet thickness. With 0.5 it lies at the center of the sheet; for a pipe Ø 508 × 6.3 mm this gives π × (508 − 6.3) mm ≈ 1576 mm. You set the value under Sheet Metal Defaults → Edit Sheet Metal Rule → Unfold Rule. For thick sheets, agree on the appropriate value with production.
Can the simple stress analysis in Inventor calculate a vessel with a fill level?
No. The stress analysis calculates a uniform pressure on faces. A fill level with pressure increasing from top to bottom, as well as gravity as a load, is handled by Inventor Nastran – with considerably longer learning time and computing time.
What does a robust Inventor model offer beyond the part itself?
Robust models reduce not only modeling errors but also the follow-up effort in drawings and assemblies.
Is a weldment required for welding information in the drawing?
Not necessarily. Weld symbols and weld bead representation can also be placed in a normal assembly drawing. A weldment fixes the parts so that they can hardly be moved or changed afterwards.
Why isn't a level displayed even though its visibility is turned on in the browser?
Under View tab → Object Visibility, entire groups such as origin planes, origin axes and origin points can be hidden at once. This setting takes precedence over the individual entries in the browser. If you turn the group back on there, the elements switched to visible individually reappear.
Does Shrinkwrap replace a clean assembly structure?
No. Shrinkwrap is a handover tool; it only reinforces a decision made beforehand.
Is an exchange model also suitable for simulation?
Not necessarily. Not every exchange model is suitable for simulation, and not every simulation model is suitable for exchange; both roles require their own simplification decisions.
Why is a part shown in red in the stress analysis even though the safety factor is high?
The color scale shows the safety factor relative to the model. Red here only means “lowest value in the model” – a high value such as 6.68 is still uncritical.
Where do I combine bodies for a stress analysis – in the model or in the FEA environment?
In CAD (assembly/part) via 3D Model → Combine, not in the FEA environment.
What are substitute parts for the analysis intended for – and what not?
On effectiveness, interchangeability and calculability; not on manufacturing details, assembly aids or variant logic.
Why can't the profile for revolve or extrude be selected completely?
Usually the contour is not closed, e.g. due to a small offset or a duplicate line segment. Delete short segments and close the lines cleanly with Extend, Trim or the Coincident constraint.
Why is the assembly skewed in the drawing view even though the parts fit together cleanly?
The drawing view takes its orientation from the origin of the assembly. If the first component is only grounded, the entire assembly can be rotated in space. Align the first component to the assembly origin with plane-to-plane constraints (YZYZ, XZ, XY The three base planes of a coordinate system: YZ is perpendicular to the X axis, XZ to the Y axis, XY to the Z axis. Background and sources ›, XZ, XY); the other parts follow.
Is the part file also deleted when a component is deleted in the assembly?
No. Right-click → Delete in the browser removes only the occurrence from the assembly; the part file is retained and can be placed again at any time.
Why are constraints sometimes retained after Replace Component and sometimes not?
They are retained as long as the faces and edges to which the constraints are attached remain unchanged. If this geometry is changed in the part, Inventor recognizes it as a new edge or face – even in the same position – and the constraint breaks.
How do I hide all sketches at once in a large assembly?
Clear the sketches via View tab → Visibility panel → Object Visibility. Right-clicking a pattern or a component → Visibility, on the other hand, hides the entire part or the entire subassembly.
Why are most Inventor problems not software problems?
Because they result from design decisions: without separating function, form and manufacturing, parametrics lose their effect, variants break and FEA becomes unreliable.
Does a value overwritten directly in the drawing's parts list change the part?
No. The entry is only overridden on the sheet; the information from the part is retained underneath.
Why does a feature in Inventor move “unexpectedly” after a change?
Not because of its function, but because of a parent geometry, an edge, face or point reference, or an earlier relationship decision.
Must the wall thickness be a driving dimension in an Inventor model?
No. Wall thicknesses are rarely the driving factor; they are usually dependent design decisions. Both are permissible – what matters is that the decision was made deliberately.
Why can't a line projected from the skeleton be revolved or extruded?
A single line is not a closed profile. Draw a rectangle over the projected line, place the corner points on the projected endpoints with Coincident and enter the wall thickness as a dimension. This way the profile follows the length from the skeleton, and the revolve can be performed.
When is a subassembly worthwhile?
When components work together functionally, changes are typically made together, and the assembly should remain readable even without detailed knowledge.
The calculated stress locally exceeds the yield strength – does the part fail?
Not necessarily. A local plastic zone is possible while the part can still be load-bearing globally. A single peak does not mean failure of the entire component.
Why does Create produce a subassembly instead of a part?
In the Create In-Place Component dialog, an assembly template (.iam) is set under Template. Before clicking OK, check that a part template (.ipt) is selected there; delete an incorrectly created component in the browser and create it again.
Should an assembly follow size changes adaptively or via parameters?
Both approaches make dependent parts follow along. Adaptive parts take over geometry from other components; if someone changes a reference part without knowing the links, parts change along with it unnoticed. With named parameters and formulas, it remains traceable which dimension drives which; this approach is usually cleaner (see 9.1b).
Why does a red cross appear in the assembly after a cut was added in the part?
Usually a constraint was attached to the face that was cut away. Double-click the affected constraint, select a new reference, e.g. an origin plane with a suitable offset, and confirm. References to origin planes remain stable with such changes.
Why does Inventor report after a dimension change that an extrusion has no effect?
Usually the cut contour is not attached to the projected geometry but merely lies close to it. Edit the sketch, attach the lines to the projected edges with Coincident until the sketch turns black, and reselect the profile area in the extrusion.
Does parameter-based variant control in Inventor have to run via Excel?
No. The parameter table in Inventor runs reliably on its own. Excel is worthwhile mainly when many variants are to be maintained side by side in one list; the parameter table in Inventor controls only one model at a time.
Why does Coil produce a flattened spring instead of a round one?
Usually the wrong axis is selected. Open the Coil command again, click Axis and select a different axis from the Origin in the browser. The axis must lie in the plane of the profile sketch, with the profile next to it.
Why does a feature no longer find its profile after the sketch was changed?
If the profile geometry was deleted and redrawn, the feature loses its reference. Double-click the feature in the browser (e.g. Extrusion, Sweep or Contour Flange), select the new contour under Profile and confirm with OK.
Why does the Resolve Link dialog appear when opening an assembly that was sent to me?
Inventor cannot find a referenced file, e.g. a part (.ipt) or a standard part that was only linked from the library. If a file with the same name is in the same folder, Inventor usually suggests it directly; otherwise select it in the dialog and click Open. With Skip or Skip All, the parts will then be missing from the assembly. To prevent this on the receiving end, pass on the assembly with Pack and Go including all linked files.
Why are the Coil and 3D Sketch commands missing when editing in the assembly?
Coil and 3D Sketch are part commands. Activate the part by double-clicking it or create it with Create; then they are available. For a pipe coil with connecting pipes, a proven approach is: the coil as a separate part, the connecting pipes as further parts in a common assembly. A single part with the coil and all pipes takes considerably longer to compute with every change and every view rotation.
Does Inventor also check for conflicts with piping or the building?
No. Inventor checks geometry within the assembly. Tools such as Navisworks are responsible for plant layout and trade coordination.
Why doesn't the stress analysis start even though constraints and loads are applied?
The part often lacks a material with physical properties. Assign the real material (e.g. stainless steel), save, and run the simulation again.
Is a thread interference a design error?
Not automatically. Threads engage with each other, so the volume overlap is intended. What is critical is the installation space behind the thread.
Why is there no torsion even though the force arrow is shown at the edge of the face?
Inventor distributes a force on a face or edge evenly over the entire face, regardless of where the arrow appears. For an off-center load, use a small applied material point; for pure torsion, apply the Moment load type to the end face and control the direction via the components Mx, My, Mz.
Is a detailed design model wrong?
No. Level of detail makes sense once function and structure are fixed and production and documentation are being prepared. It becomes problematic in early phases and while decisions are still open.
How do I design in Inventor based on a point cloud?
Attach the point cloud in a part (IPTIPT File extension of a part in Autodesk Inventor. Background and sources ›) via the Manage tab. Use the Navigator to access the regions defined in ReCap, and trim the region with a box. In the Point from Point Cloud flyout you will also find Plane from Point Cloud; use it to create work planes and axes. Project these into a sketch (Project Geometry) and extrude. For extensive remodeling, AutoCAD with a STEP export to Inventor is often faster. Related support question: “Can I turn a mesh (STLSTL File format for 3D solids as a triangle mesh, e.g. for 3D printing. It describes only the surface. Background and sources ›) back into a solid in Inventor?” Yes, but it takes effort: open the STL file, detect regular surfaces with “Fit Mesh Face” (e.g. a cylinder with a window selection), extend and trim the surfaces, and create a solid from them. For as-built models from point clouds, it is usually faster to model in AutoCAD with snapping to the point cloud and hand the result to Inventor as STEP.
How do you get an Inventor drawing into AutoCAD in editable form?
An Inventor DWG can be opened in AutoCAD, but the views are there as non-editable blocks in the layout. For editable geometry in model space, save the drawing as an AutoCAD DWG via Save Copy As.
How can a finished drawing be reused for a similar model?
Save the drawing under a new name with Save As and then assign the new model via Manage → Replace Model Reference. This works reliably if the new model was created from the old one via Save As. Inventor highlights dimensions whose reference is missing in color; after clicking the dimension, Inventor shows the attachment points, which you can reset.
Why is a hole created in the assembly missing in the individual part?
Features created directly in the assembly apply only to the assembly. If the hole is to be in the part, activate the part in the assembly by double-clicking it and create the feature there; Return takes you back to the assembly.
Why does the safety factor change after mesh refinement?
A coarse mesh represents stress peaks inaccurately; with a finer mesh, the result becomes more realistic.
Why is a stress analysis with contacts unstable?
Because internally nodes are coupled, contacts are searched, tolerances are checked and face pairings are generated. Even small geometric deviations lead to problems.
What is the difference between a single model and a Factory model when simplifying?
In the single model, FEA is an additional step and simplification is a reaction. In the factory model, calculation is part of the concept; details are never created in the first place.
How do I remove a component that was accidentally included in a pattern?
It cannot be deleted individually. Double-click the component pattern in the browser, deselect the component under Components and confirm with OK.
Why isn't a custom material available for selection in a new part?
Initially it is attached only to the current document (Document Materials). Only after right-click → Add to → Inventor Material Library is it available in all parts.
Inventor with Vault is very slow on the network – what could be the cause?
In the support case, the cause was the automatically assigned IP address (DHCPDHCP Dynamic Host Configuration Protocol: a server in the network assigns IP addresses to the computers automatically. Background and sources ›). With a fixed IP address entered, it ran significantly faster.
Inventor reports that VBA is not installed – how do I get macros and the VBA editor back?
You want to continue working with VBAVBA Visual Basic for Applications: macro language, among others in Microsoft Office, AutoCAD and Autodesk Inventor. Background and sources › macros in Inventor. Since Inventor 2021, the VBA module is no longer installed with Inventor for security reasons but is provided separately. 1. In Autodesk Support, open the article "Download the Microsoft VBA module for Inventor" and select the download for your version. 2. Close all programs. 3. Start the downloaded self-extracting EXEEXE File extension of an executable program under Windows. Background and sources › file by double-clicking; it installs VBA together with the required VC10VC10 Microsoft Visual C++ 2010 runtime library (version 10). Many programs need it to start. Background and sources › runtime. 4. Start Inventor and open the VBA editor. Advantage: existing macros continue to run. For new automations, iLogic is an alternative with access to the Inventor APIAPI – Application Programming Interface Programming interface: a defined way in which your own program uses the functions and data of a software – e.g. for custom extensions in AutoCAD Plant 3D. Background and sources › via VB.NETVB.NET Visual Basic .NET: Microsoft programming language for the .NET platform. iLogic in Autodesk Inventor uses it. Background and sources ›.
Advance Steel (68)
Why are some objects on AS_Standard even though all others have their own layers?
Because no layer definition is stored for these objects in the defaults. They are then placed on the default or current layer.
Where do I find the keyboard shortcuts?
Under Tools → Customize → Edit Program Parameters. A text file opens with all commands and their shortcuts.
Why must the drawing be created from the template?
Because it contains the Advance Steel layers and AS_Standard is set as the current layer. Otherwise, the layer assignment of the configuration does not work correctly.
What is the project data in the project settings used for?
The entered details such as project, project no., client and structure later appear in the BOMs and on the drawings.
How do I give a custom saved workspace in Advance Steel a sensible name?
With the original name followed by your own abbreviation. The abbreviation alone is not enough, because then nobody knows which area is meant.
How do I create grid lines with different spacings?
With the grid command that creates a group of axes from individual spacings: the first point is the start, the second point the axis length, the third point the direction. Then enter the spacings one after the other (e.g. 5000, 5000, 2500) and finish with an empty entry. The sum of the spacings is not limited – check it yourself.
Why do two levels appear to lie on top of each other in the Advance Steel model?
Below the levels, the grid is displayed copied upward. The red level markers with their elevations are what count.
How do I get the classic AutoCAD toolbars (e.g. UCS, Object Snap) back in Advance Steel?
Use the CUI command to open the Customize User Interface dialog. Select your workspace and click Customize Workspace. On the left under Toolbars, activate the entries you want, e.g. UCS, UCS II, Object Snap and View, and apply the change. Then drag the floating toolbars to the edge of the drawing area, where they dock.
What is the benefit of exchanging data with Revit?
Advance Steel works bidirectionally with Revit: after the first export or import, you update the data via synchronization.
Why not draw directly with the real coordinates?
AutoCAD does not handle very large coordinates well. You draw close to the origin and use the elevation and north orientation to define which values the drawing output shows.
Can I build my own connections and save them as templates?
Yes. This is part of administration: connections can be added and extended.
What does the local elevation mean?
The height of the layer above the previous level, comparable to a story height.
Can I put the Advance Steel commands into my own toolbars?
Given the number of commands, that is not practical. You use the commands as they are arranged on the ribbon and in the palettes.
Why does the search not find my parts by role even though I entered the property?
Changes in the properties dialog are only applied when you close the dialog. Clicking Save alone does not close it; only after closing do the objects appear in search queries. Assign the roles systematically for all part types (columns, beams, bracings, plates, bolts) – they control numbering, drawing generation and connections. When clicking, make sure you hit the part itself and not, for example, a line or a hole.
Does the north arrow have to be placed at the origin?
No. What matters is the orientation of the UCS in which it is placed.
I deleted the prefix, but the label does not change. Why?
The change is only applied when you then click another field in the dialog.
Most menus have suddenly disappeared from the menu bar. How do I get them back?
Enter _CUI, select the current workspace on the left and click Customize Workspace on the right. On the left under Menus, check the desired menus, confirm with Done and Apply, and save the workspace.
How do I place a single grid line centered between two existing grid lines?
Start the Single Axis command, snap the start point via Shift + right-click → Mid Between 2 Points at two axis intersections, and place the second point with Perpendicular on the opposite axis. In the dialog, you assign the name, e.g. X.
Which checks does Advance Steel offer for the model?
In addition to the model check and clash detection, there is a bolt check, among others, which checks e.g. edge distances that are too small and ease of assembly.
How do I change several columns at the same time?
Select all the columns you want, right-click → Advance Properties. Changes then apply to all selected columns.
Does the gusset plate change if I increase the bolt spacing?
Yes. The plate becomes larger because the projection is calculated automatically from the distances.
What are galvanizing holes for?
If the part is galvanized, the zinc can flow through these holes.
How do I join two bent plates into a folded plate?
Use the function for joining plates on the objects. It works most reliably when both plates end at an aligned edge but do not meet exactly: first construct the plates up to the edge and then pull each of them back by 1–2 mm. Then select both plates and specify the bend radius. For complicated geometries, it can be easier to create a polygon plate via the corner points of auxiliary plates.
What does identical-part detection do?
If a part occurs more than once, it gets the same item number and a quantity.
Why is my new plate in a different place than drawn?
Advance Steel draws the plate relative to the current UCS at Z = 0; the picked points only determine X and Y.
Why can't the connection be applied to all joints?
The transfer only works with identical angles; with varying angles, build or mirror the plate for each connection.
What is the benefit of a connection group?
If you change the first object of the group, all others change with it – you don't have to adjust each connection individually.
How do I set the projections of a base plate individually?
Clear the “all projections equal” check box – then all four projections can be edited individually.
Why is it worth drawing construction lines in Advance Steel before the beams?
Because there is a Beam on Line command: the beams are then created exactly on the prepared lines.
Why is the shim plate inside the concrete?
Advance Steel assumes that the column is modeled correctly and reaches the planned elevation; the shim plates are therefore placed downward toward the foundation.
What is the difference between isolating and hiding objects?
Isolate leaves only the selected objects visible; Hide Objects hides exactly the selected ones. Both are AutoCAD commands under right-click → Isolate.
Why aren't holes in inclined plates dimensioned?
In assembly views, the view does not align with the inclined holes; the workaround is camera views or subsequent annotation.
Why can I not create an assembly from freely selected parts in Advance Steel?
Assemblies result from connections: parts attached to a main part via weld or connection tools belong to it. An arbitrary selection does not become an assembly. To display such an area, use a camera with a suitable object selection.
Do I need main part numbers?
Only when working with assemblies.
What is the difference between Advance Properties and Advance Joint Properties?
Advance Properties opens only the selected single part; Advance Joint Properties opens the entire structural element.
What is the “Role” in the properties of a beam (Naming tab) used for?
It describes the function of the component, e.g. horizontal beam. It is important for the bill of materials and for drawing derivation.
Where do I find the Building Generator?
In the AS tool palette under Tools. If you cannot see it, scroll or drag the edge of the palette to enlarge it.
What is the difference between processes and drawing styles?
Processes work through a selection automatically and fill sheets in the preset format; with drawing styles you derive individual views selectively, including onto an existing drawing.
What do the priority numbers of concrete elements (e.g. concrete beams) mean?
Only the ratio counts: the higher number takes precedence and runs through. Advance Steel sets default values that you can change.
Why do I enter a name in the table when saving a connection configuration (e.g. apex haunch)?
If it is empty, multiple entries can hardly be told apart. A meaningful name (e.g. profile, span) shows immediately whether the configuration fits.
When placing connections from a template, what is the difference between “single” and “multiple”?
Single creates the connection at one location; multiple creates it in one pass at several selected locations.
Can I show just one of the groups hidden by the filter again?
No, this function only lets you show all of them. That is why it pays to put such objects on separate layers and control them via layer settings.
Can I also design my own brackets as a connection?
Yes. A bracket you have designed yourself can be used as a custom connection.
Holes in inclined plates are not annotated in the Advance Steel derivation – how do I add this?
Advance Steel generates the hole representation from the model. Add missing annotations to the selected objects afterward using the annotation function. If the cause is the orientation of an assembly view, it is better to generate the view via a camera. You want your own hole symbols? Set them up in the Management Tools: a new entry in the “Symbols” table of the AstorBase database with your own DWG symbol file, controlled by diameter, hole type, view direction and visibility.
Why do I get “more than one part selected” when creating an assembly?
Assemblies are created from connections (weld and connection tools) to a main part; a free selection does not become an assembly.
What does the Purge command do?
It removes definitions that are stored in the drawing but not used, e.g. blocks from an import. Advance Steel layers and styles are still needed.
Where do the internal forces for the check come from?
From the structural analysis. If the connection has already been verified in the structural analysis, the design check in Advance Steel serves to verify the detailing.
Does the role affect the BOM?
Yes, on the BOM and the assignment of item numbers; the same applies to the material.
Why can't I change the level in the dialog of an isolated footing?
Because the level comes from the structure in the Project Explorer. That is where you define which level applies.
What do the values in the detail box mean when creating a camera?
Front/Back is the section depth in front of and behind the section plane (e.g. 500 mm each, 1000 mm in total); X/Y delta limit the extent within the plane, e.g. the width and height of the building.
Can I enter the remainder and the number of sections myself for purlins?
No, the fields are inactive. Advance Steel calculates them from the start, intermediate and end distances.
What is the difference between holes and punch marks?
Holes are real holes drilled in the plate; center punch marks only mark the drilling points so that the workshop knows where to drill.
Why is the Favorites category empty at first?
Because no favorites have been marked yet. It fills up as soon as you click the star for a connection.
How are processes and drawing styles related?
Processes rely on drawing styles: a process assigns a drawing style to each object to be derived via a mapping and uses it to generate the views.
How do I assign mark numbers with my own prefix in Advance Steel?
Always run a model check before numbering. In the object properties, on the Naming tab, assign a role and the prefix for the single part or main part number. Delete existing numbers before renumbering – separately for single parts and main parts. Then start the numbering; prefixes can also be assigned centrally via the prefix settings. Identical part detection only works for truly identical parts.
Why does transferring connections to other locations not work?
Transferring or copying connections requires a geometrically identical situation – the same sections, angles and distances, as occur, e.g., in structures on a grid. If angles deviate even slightly, the transfer fails. In such cases, it is faster to recreate each connection with the Connection Assistant or connection tool. Then check the generated bolts for correct edge distances.
What does the approval status mean?
It documents the processing status, e.g. “Approved” once the structural engineer has confirmed the connection.
Why do mirrored parts get different position numbers in Advance Steel?
Identical-part detection assigns the same number only to exactly identical parts. If components were created partly mirrored and partly rotated, minimal differences arise and thus separate numbers. Stick to one method (consistently mirror or rotate) and check for deviations before numbering.
How do I get controlled views instead of automatically generated sections in Advance Steel?
Work with cameras: first align a UCS with the desired view plane and save it under a name in the UCS Manager. Then create a camera and define the view direction, section depth (detail box front/back) and the objects to display, e.g., via a search query. When deriving via drawing styles, you get exactly this view. The processes, by contrast, generate views according to their own logic.
The Connection Assistant fails with skewed connections – how do I design the gusset plate?
Create a local UCS at the connection, place an auxiliary plate at each connection, and generate the bolts on it via the connection. Then draw a polygon plate over the outer edges, delete the auxiliary plates along with the connection, and mirror the finished plate to the opposite side. Check the edge distances of the bolts – automatically placed bolts were sometimes too close to the edge.
What is the shim plate used for?
It compensates when the foundation is not exactly at the planned elevation; the plates are placed under the base plate so that the elevation fits again.
Why doesn't a window open when I click the Building Generator?
The palette is shown or hidden and appears in the last position used; it may be docked or on another screen.
Can I set the section of a column before drawing?
Advance Steel first draws with the current default selection; you then change the section in the dialog. The default itself can be set centrally in the configuration at the start.
In connection design (e.g. fin plate), how can I tell which spacing doesn't fit?
In the connection design report, the affected check is highlighted, e.g. the bolt spacing with its permissible range; adjust this value and check again.
How do I select an entire gable frame (macro) for copying?
Click the box of the structural element – the entire macro is then selected.
In Advance Steel, how do I connect two crossing diagonals?
Let one diagonal run through and split the other so that four sections result. Create the crossing connection in the Connection Manager and select the diagonals in the required order. If the members do not lie in one plane, the tool often fails to detect the crossing.
How do you adapt the title block or sheet format of derived drawings?
Title block and sheet format come from the prototype, a DWG template in the Advance Steel “Prototypes” folder. 1. Check which prototype is assigned to the drawing style used. 2. Open and change this prototype in Advance Steel, e.g. frame, revision table or title block. 3. The title block is the block HYPERSTEELPAGEHEADER: you may adjust geometry and attributes, but not the block name. Project-specific prototypes can also be located in the “Prototypes” folder of the model folder.
Advance Steel reports “no main part selected” when deriving drawings, or labels the main part number – I only number individual parts. What should I do?
Choose a drawing style for individual parts and click “Apply”. In the drawing style, under Annotation, switch the field from main part number to individual part number. When editing the annotation text, select from left to right and without spaces, otherwise the field will not be applied. Change the title block and sheet size directly in the prototype DWG.
The questions come from our training courses and support sessions – anonymized, without customer or project data. Menu paths refer to current German program versions and may differ by version; the answers do not replace checking in your own project.

Before you go …
Don't miss any training dates, C³ invitations and news on AutoCAD Plant 3D and P&ID.
Our newsletter only arrives when there's something important – concise and with tips from practice.
Technically responsible: A. Seitz, Managing Director of A. Seitz Ingenieur GmbH (plant design, AutoCAD Plant 3D).
Terms, background and sources 135 terms on this page
Brief explanations for reference. They do not replace the standard or code itself.
- bar – Unit of pressure
Unit of pressure: 1 bar = 100,000 Pa = 0.1 MPa. In plant engineering, it usually refers to the gauge pressure relative to the surroundings (often “barg” or, in German, “bar ü”).
- R&I – Piping and instrumentation diagram
Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram).
Symbols and drawing rules: DIN EN ISO 10628-1 and -2. Identification letters for instrumentation: DIN EN 62424 or ISA-5.1.
- ISO – International Organization for Standardization
International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards).
ISO was founded in 1947. Its members are the national standards bodies; for Germany, this is DIN.
- PDF – Portable Document Format
File format for documents that looks the same on every device and can be printed – e.g. the piping class sheet.
- ZIP – ZIP archive
Compressed archive containing several files in one file. Windows opens it without additional software, e.g. catalog and pipe spec for Plant 3D.
- DWG – AutoCAD drawing format
AutoCAD file format for drawings and 3D models; AutoCAD Plant 3D and AutoCAD P&ID also save in this format.
- DWT – Drawing template
AutoCAD template file (drawing template): new drawings take their layers, styles and settings from it.
- ISA – International Society of Automation
US association for automation. Its standard ISA-5.1 specifies symbols and identification letters for instrumentation.
- DIN – German Institute for Standardization
German Institute for Standardization in Berlin: it publishes the German standards (DIN standards) and represents Germany in CEN and ISO.
DIN was founded in 1917 as the Standards Committee of German Industry. If “DIN EN” or “DIN EN ISO” precedes the number, a European or international standard has been adopted unchanged as a German standard.
- F9
Function key in AutoCAD: turns snap mode on or off – the cursor then jumps to the grid points.
- PROXYSHOW
AutoCAD system variable: determines how proxy objects – objects from a program that is not currently loaded – are shown: 0 = not, 1 = in full, 2 = as bounding box only.
- REGEN
AutoCAD command: regenerates the display of the drawing in the current viewport.
- ID – Identifier
Unique identifier, e.g. the number under which a record is kept in a database.
- PLANTREFRESHACQPROPERTY
Command in AutoCAD Plant 3D and AutoCAD P&ID: updates acquired properties – e.g. the line number from an acquisition rule – on objects already drawn.
- PICKFIRST
AutoCAD system variable: determines whether objects can be selected before the command (1) or only after the command is started (0).
- PLANTDWGCHECKER
AutoCAD P&ID command: compares the texts in the drawing with the property values in the project database (drawing checker).
- VPN
Virtual Private Network: encrypted connection over the internet into a company network, e.g. from a home office.
- CSV – Comma-separated values
Simple text file containing a table: one line per record, columns separated by a delimiter (in German Excel usually a semicolon).
- RTF
Rich Text Format: text format with simple formatting that almost every word processor opens.
- EXPORTTOAUTOCAD
Command in AutoCAD Plant 3D and AutoCAD P&ID: saves a copy of the drawing in which the plant objects are converted into simple AutoCAD objects – readable without plant software.
- SQL – Structured Query Language
Query language for databases. “SQL Server” is Microsoft's database system; AutoCAD Plant 3D can store its project data there instead of in SQLite files.
- PICKSTYLE
AutoCAD system variable: determines whether groups are selected as a whole (1) or as individual objects (0). Other values concern hatches.
- F2
Function key in AutoCAD: shows and hides the extended text window with the command history – where, e.g., audit reports appear.
- PLANTDEFINECALCPROPERTIES
AutoCAD Plant 3D command: creates calculated properties whose value is composed of other properties, e.g. nominal size, piping spec and fluid in one field.
- SQLite
Database in a single file, without its own server. AutoCAD Plant 3D stores project data this way by default.
- PLANTAUDIT
Command in AutoCAD Plant 3D and AutoCAD P&ID: checks the drawing against the project database and fixes errors in the synchronisation between the two.
- DCF
Project database file of AutoCAD Plant 3D and AutoCAD P&ID, e.g. ProcessPower.dcf (P&ID) and Piping.dcf (3D piping). It contains the project configuration and, in SQLite projects, also the project data.
- CAD – Computer-Aided Design
Computer-aided design and drafting.
- FIELDDISPLAY
AutoCAD system variable: determines whether fields are shown with a grey background (1) or without (0). The background is never plotted.
- BLOCK
AutoCAD command: combines objects under a name with a base point into a block definition that can be inserted as often as required.
- DN – Nominal size (DN)
Designation for the size of pipes, fittings and valves (Diameter Nominal). It is roughly the inside diameter in millimeters but is not an exact dimension.
Specified in DIN EN ISO 6708. Which outside diameter belongs to a DN is defined in the dimensional standards, e.g. DIN EN 10220 for steel pipes.
- SKEY – Symbol key (SKEY)
Four-character symbol key for the isometric: the first two characters give the component type, the last two the end connection, e.g. VTFL = gate valve with flanges.
- CPak
Folders in the AutoCAD Plant 3D content directory (e.g. “CPak Common”) containing catalogs and their component files. The program expects these folders unchanged.
- WF – Wafer type (between flanges)
End code of a component connection in AutoCAD Plant 3D: wafer type, e.g. for orifice plates or butterfly valves between two flanges. Plant 3D then places only one through-bolt set.
- FL – Flange
End code of a component connection in AutoCAD Plant 3D: flange. Plant 3D adds a mating flange with gasket and bolts.
- STEP – Standard for the Exchange of Product model data
Vendor-neutral 3D exchange format for parts (ISO 10303), e.g. for equipment from the manufacturer.
- PLANTPARTCONVERT
AutoCAD Plant 3D command: turns an AutoCAD block into a piping component by adding connections (ports).
- BIM – Building Information Modeling
Planning, building and operating with a digital model that contains not only the geometry but also the properties of the components.
- PLM – Product Lifecycle Management
Management of all data of a product over its entire life – from development through manufacturing and operation to decommissioning. A PLM system is the software for this.
PLM connects the design data (see PDM) with purchasing, manufacturing, service and documentation. In plant design, for example, it is about reusing data from AutoCAD P&ID and AutoCAD Plant 3D over the entire life of a plant.
- PL – plain end
End code of a component connection in AutoCAD Plant 3D: plain end, e.g. of a pipe.
- THDM – Male thread
End code of a component connection in AutoCAD Plant 3D: male thread.
- THDF – Female thread
End code of a component connection in AutoCAD Plant 3D: female thread.
- S1, S2
First and second connection (port 1, port 2) of a component in AutoCAD Plant 3D, e.g. in the catalog and in the isometric configuration.
- BV – Butt weld end
End code of a component connection in AutoCAD Plant 3D: weld end (butt weld). Where BV meets BV or a plain end, Plant 3D places a weld.
- PCAT
AutoCAD Plant 3D catalog file with all components of a catalog, their sizes and properties. Technically it is an SQLite database.
- PPL – Plastic weld
End code of a component connection in AutoCAD Plant 3D: plastic weld.
- PSW – Plastic socket
End code of a component connection in AutoCAD Plant 3D: plastic socket.
- FASTSHADEDMODE
AutoCAD system variable: turns the newer cross-platform 3D graphics system on (1) or off (0). The variable no longer exists in AutoCAD 2027.
- PCF – Piping Component File
Text file with which AutoCAD Plant 3D passes piping data to the isometric generator and to other programs.
- PLANTINSULATIONMODE
AutoCAD Plant 3D system variable: determines whether insulation on pipes is displayed.
- IFC – Industry Foundation Classes
Open exchange format for building and plant models (BIM), standardized as ISO 16739.
- MEP – Mechanical, Electrical and Plumbing
Collective English term for building services: heating and ventilation, electrical and plumbing. Roughly equivalent to the German TGA; AutoCAD MEP is the matching AutoCAD toolset.
- LOG
Log file: a program writes into it what it has done and which errors occurred.
- MB, GB, TB – Megabyte, gigabyte, terabyte
Units for data volumes: 1 GB (gigabyte) = 1,000 MB (megabytes), 1 TB (terabyte) = 1,000 GB.
Operating systems sometimes calculate with 1,024 instead of 1,000. Strictly speaking these units are called MiB, GiB and TiB (standard IEC 80000-13).
- NWC – Navisworks cache file
File that Navisworks creates when loading a foreign file so that it loads faster the next time.
- NWD – Navisworks file (published)
Navisworks file in which all models are stored permanently – for sharing, also with the free Navisworks Freedom.
- FILEDIA
AutoCAD system variable: determines whether file dialogs open (1) or AutoCAD asks for file names on the command line (0).
- BOM – Bill of Materials
Bill of Materials – parts or material list. In AutoCAD Plant 3D the BOM-ATTRIBUTES section of Iso.atr defines the component properties on the isometric.
- PN – Nominal pressure rating
Designation for the pressure rating of flanges and valves (Pressure Nominal), e.g. PN 16. It corresponds roughly to the allowable pressure in bar at room temperature; at higher temperatures, less is allowed.
Specified in DIN EN 1333. The pressure-temperature ratings for each material are given in the component standards, e.g. DIN EN 1092-1 for steel flanges.
- INSUNITS
AutoCAD system variable: sets the drawing unit for inserting, e.g. 4 = millimetres, 6 = metres. AutoCAD uses it to scale blocks and references when inserting.
- PLANTCOPYLINENUMBER
AutoCAD Plant 3D system variable: determines whether the line number is kept (ON) or not (OFF) when copying from an existing line – in the P&ID and in the 3D model.
- MText – Multiline Text
Paragraph text in AutoCAD: multi-line text as one object, with its own formatting per character.
- PNG
Portable Network Graphics: image format with lossless compression.
- PLANTISOSPLITPOINTS
AutoCAD Plant 3D command: transfers the split points of an isometric into the 3D model as fixed points (“Convert split points”).
- PLANTEQUIPMENTCONVERT
AutoCAD Plant 3D command: converts a 3D model made of AutoCAD objects into equipment with nozzles and tag (“Convert Equipment”).
- BOP – Bottom of Pipe
Bottom of Pipe – lower edge of the pipe. Lines with the same BOP rest at the same height on a pipe rack, for example, even with different nominal sizes.
- PLANTDYNAMICTOOLPALETTE
AutoCAD Plant 3D command: creates a tool palette with the components of the current piping spec.
- DIMLFAC
AutoCAD system variable: scale factor for linear dimensions: the measured value is multiplied by it before it appears as the dimension text.
- CADmep
Autodesk Fabrication CADmep: add-on for AutoCAD for designing ventilation, piping and electrical installations with fabrication-accurate components.
- AEC – Architecture, Engineering & Construction
English for architecture, engineering and construction. At Autodesk this is the name of the “AEC Collection”, which includes AutoCAD with the AutoCAD Plant 3D toolset, Revit and Navisworks.
- PLANTINSULATIONUSEPARTLAYER
AutoCAD Plant 3D system variable: determines whether the insulation is on the pipe's layer (1) or on its own layer (0).
- PLANTINSULATIONCOLOR
AutoCAD Plant 3D system variable: sets the colour of the displayed insulation; 256 = ByLayer.
- PLANTINSULATIONTRANSPARENCY
AutoCAD Plant 3D system variable: sets the transparency of the displayed insulation; -1 = ByLayer.
- ASYMMETRIC COMPONENT LIST
Section in the AutoCAD Plant 3D isometric configuration: list of components with different connections (e.g. flange on one side, weld end on the other). Each line contains the iso type, SKEY and the end types at S1 and S2.
- CELWEIGHT
AutoCAD system variable: sets the lineweight of new objects; -1 = ByLayer, -2 = ByBlock, -3 = Default.
- ATTRIBUTES
Section of the AutoCAD Plant 3D attribute file Iso.atr: it contains the project, drawing and line group properties for isometric and PCF output. Component properties are under BOM-ATTRIBUTES.
- END-CONNECTION-PIPELINE
Entry in a PCF file: the line ends at this point at another pipeline. Some stress analysis programs cannot read these entries.
- P3D
Short form for AutoCAD Plant 3D, e.g. before class names in the project setup (“P3D line group”).
- ATTSYNC
AutoCAD command: applies changed attributes of a block to all places where this block is inserted.
- F7
Function key in AutoCAD: shows or hides the grid.
- F8
Function key in AutoCAD: turns ortho mode on or off (drawing only horizontally and vertically).
- F3
Function key in AutoCAD: turns object snap on or off.
- PICKADD
AutoCAD system variable: determines whether each clicked object is added to the selection (1, default) or replaces the previous selection (0). With 0, only the Shift key adds.
- TABELLENEXPORT
AutoCAD command (German: TABELLENEXPORT): saves an AutoCAD table as a CSV file, e.g. for further work in Excel.
- XLSX
Microsoft Excel file format from version 2007.
- FILLMODE
AutoCAD system variable: determines whether hatches, fills and wide polylines are shown filled (1) or only as outlines (0).
- REGENALL
AutoCAD command: regenerates the display of the drawing in all viewports.
- PEDIT
AutoCAD command: edits polylines. It can, for example, turn single lines into a polyline and join them into a closed profile.
- THUMBSAVE
AutoCAD system variable: determines whether a preview image is written into the drawing when saving (1) or not (0). The image is shown e.g. by Windows Explorer and the Open dialog.
- RASTERPREVIEW
AutoCAD system variable: controls whether a preview image is written into the drawing when saving. Newer versions use THUMBSAVE for this.
- QTEXTMODE
AutoCAD system variable for quick text: with 1, AutoCAD shows and plots texts only as boxes, with 0 as full text.
- ISO A4 – Paper size A4 according to ISO 216
Sheet size 210 × 297 mm from the A series according to ISO 216 (in Germany DIN EN ISO 216). Each A size is obtained by halving the next larger one.
- APPLOAD
AutoCAD command: loads add-on applications such as LISP programs (.lsp) into the current session (“Load Applications”).
- ABI – Customize User Interface (CUI)
AutoCAD command (German: ABI): opens the “Customize User Interface” editor for ribbons, toolbars, shortcut keys and quick properties.
- COORDINATIONMODELATTACH
AutoCAD command: attaches a Navisworks model (NWD or NWC) as a coordination model, e.g. to design to it with exact dimensions.
- CMOSNAP
AutoCAD system variable: turns object snap to an attached Navisworks model (coordination model) on or off.
- CMFADEOPACITY
AutoCAD system variable: controls how transparent an attached Navisworks model (coordination model) is displayed, value 0 to 100.
- CMFADECOLOR
AutoCAD system variable: controls how strongly the colours of an attached Navisworks model (coordination model) are faded, value 0 to 100.
- NWF – Navisworks working file
Navisworks file that only references the original files and contains viewpoints, clash tests and comments.
- EXPORT
AutoCAD command: saves the drawing or selected objects in another file format, e.g. IGES or SAT.
- IGES
Initial Graphics Exchange Specification: vendor-neutral exchange format for 2D and 3D CAD data.
- SAT
File format of the ACIS 3D modelling kernel. AutoCAD uses it to pass solids to Autodesk Inventor, for example.
- PC3
AutoCAD plotter configuration file: contains the printer or plotter, paper sizes and output settings.
- CUIX
Customization file of the AutoCAD user interface with ribbons, toolbars, menus and shortcut keys.
- BEMREASSOZ
AutoCAD command (German: BEMREASSOZ): reassociates a dimension with points on objects so that it follows changes again.
- ANNOMONITOR
AutoCAD system variable: turns the annotation monitor on or off. It flags dimensions that have lost their association with their object; 0 = off.
- LMTOOLS
Management program of the FlexNet license server (lmtools.exe) for network licenses, including Autodesk's: set up, start and stop the service and query its status.
- TCP
Transmission Control Protocol – network transport protocol. “TCP 27000–27009” gives the port numbers that the firewall must open for the license server.
- XRef – external reference
Another drawing that is only linked in AutoCAD, not inserted permanently. Changes to the original appear on the next load.
- F12
Function key: in Autodesk Navisworks it opens the global options, in AutoCAD it turns dynamic input at the cursor on or off.
- DXF
Drawing Interchange Format: Autodesk exchange format for drawings that other CAD programs can also read.
- WBS – Work Breakdown Structure
Work Breakdown Structure: breakdown of a project into sub-tasks. In Navisworks TimeLiner, tasks can be ordered by it.
- CSI
Construction Specifications Institute (USA). CSI-16 and CSI-48 are breakdowns of construction work according to MasterFormat with 16 and 48 main divisions; Navisworks offers them as templates for quantity take-off.
- RCP
Autodesk ReCap project file: combines the individual scans (RCS) of a laser scanning project with their registration.
- RCS – ReCap scan file
Scan file of Autodesk ReCap. Several RCS files together form a ReCap project (RCP).
- dd.MM.yyyy HH:mm
Placeholders in the date format: dd = day, MM = month, yyyy = year (each with leading zero), HH = hour (0–23), mm = minute. Upper and lower case matter.
- SSD – Solid State Drive
Fast data storage without moving parts.
- FARO
Maker of laser scanners (FARO Technologies); “Focus” is its scanner series.
- FLS – FARO scan file
Single scan file of a FARO laser scanner.
- FWS – FARO SCENE workspace
Project file of older versions of the FARO software SCENE.
- LSPROJ – FARO SCENE project
Project file of newer versions of the FARO software SCENE.
- FBX
Autodesk exchange format for 3D models with meshes, textures and animations.
- GCP – Ground Control Point
Ground control point: a point with known coordinates on site that is marked on the images. It makes a model from photos true to scale and correctly positioned.
- RCM
Autodesk ReCap mesh file, e.g. the textured 3D mesh from photos or drone images.
- TXT
Plain text file without formatting.
- ACC – Autodesk Construction Cloud
Autodesk cloud platform for design data and collaboration; called Autodesk Forma since 24 March 2026.
- YZ, XZ, XY
The three base planes of a coordinate system: YZ is perpendicular to the X axis, XZ to the Y axis, XY to the Z axis.
- IPT
File extension of a part in Autodesk Inventor.
- STL
File format for 3D solids as a triangle mesh, e.g. for 3D printing. It describes only the surface.
- DHCP
Dynamic Host Configuration Protocol: a server in the network assigns IP addresses to the computers automatically.
- VBA
Visual Basic for Applications: macro language, among others in Microsoft Office, AutoCAD and Autodesk Inventor.
- EXE
File extension of an executable program under Windows.
- VC10
Microsoft Visual C++ 2010 runtime library (version 10). Many programs need it to start.
- API – Application Programming Interface
Programming interface: a defined way in which your own program uses the functions and data of a software – e.g. for custom extensions in AutoCAD Plant 3D.
- VB.NET
Visual Basic .NET: Microsoft programming language for the .NET platform. iLogic in Autodesk Inventor uses it.
Sources and origins
- BIPM – International System of Units (SI) (for bar)
- ISO – International Organization for Standardization (for R&I, ISO, STEP, IFC)
- IEC – International Electrotechnical Commission (for R&I, MB, GB, TB)
- Wikipedia: Portable Document Format (German) (for PDF)
- Wikipedia: ZIP file format (German) (for ZIP)
- Autodesk – DWG (for DWG)
- Autodesk Help (for DWT, DCF, SKEY, CPak, WF, FL, PL, THDM, THDF, S1, S2, BV, PCAT, PPL, PSW, NWC, NWD, MText, BOP, ASYMMETRIC COMPONENT LIST, ATTRIBUTES, END-CONNECTION-PIPELINE, P3D, NWF, PC3, XRef, RCP, RCS, RCM, YZ, XZ, XY, IPT)
- ISA – International Society of Automation (for ISA)
- DIN – German Institute for Standardization (for DIN, DN, PN)
- Autodesk Help: Function Key Reference (for F9, F2, F7, F8, F3, F12)
- Autodesk Help: PROXYSHOW (System Variable) (for PROXYSHOW)
- Autodesk Help: REGEN (Command) (for REGEN)
- Wikipedia: Identifier (for ID)
- Autodesk Community: AutoCAD Plant 3D Forum (for PLANTREFRESHACQPROPERTY)
- Autodesk Help: PICKFIRST (System Variable) (for PICKFIRST)
- Autodesk Help: PLANTDWGCHECKER (for PLANTDWGCHECKER)
- Wikipedia: Virtual private network (for VPN)
- Wikipedia: CSV file format (German) (for CSV)
- Wikipedia: Rich Text Format (for RTF)
- Autodesk Help: EXPORTTOAUTOCAD (for EXPORTTOAUTOCAD)
- Microsoft Learn: SQL Server (for SQL)
- Autodesk Help: PICKSTYLE (System Variable) (for PICKSTYLE)
- Autodesk Help: To Set Up a Calculated Property (for PLANTDEFINECALCPROPERTIES)
- SQLite (for SQLite)
- Autodesk Help: PLANTAUDIT (for PLANTAUDIT)
- Wikipedia – Computer-aided design (for CAD)
- Autodesk Help: FIELDDISPLAY (System Variable) (for FIELDDISPLAY)
- Autodesk Help: -BLOCK (Command) (for BLOCK)
- ISO 6708 – Pipework components, definition and selection of DN (for DN)
- Autodesk Help: PLANTPARTCONVERT (for PLANTPARTCONVERT)
- buildingSMART International (for BIM, IFC)
- Wikipedia: Product lifecycle management (for PLM)
- Autodesk Help: FASTSHADEDMODE (System Variable) (for FASTSHADEDMODE)
- Autodesk – AutoCAD Plant 3D Help (for PCF)
- Autodesk Help: PLANTINSULATIONMODE (for PLANTINSULATIONMODE)
- Autodesk (for MEP, AEC, ACC)
- Wikipedia: Log file (for LOG)
- BIPM – SI prefixes (for MB, GB, TB)
- Autodesk Help: FILEDIA (System Variable) (for FILEDIA)
- Wikipedia: Bill of materials (for BOM)
- CEN and CENELEC – European standardization (for PN)
- Autodesk Help: INSUNITS (System Variable) (for INSUNITS)
- Autodesk Help: PLANTCOPYLINENUMBER (for PLANTCOPYLINENUMBER)
- Wikipedia: Portable Network Graphics (for PNG)
- Autodesk Help: To Save Iso Split Points in the 3D Model (for PLANTISOSPLITPOINTS)
- Autodesk Help: PLANTEQUIPMENTCONVERT (for PLANTEQUIPMENTCONVERT)
- Autodesk Help: PLANTDYNAMICTOOLPALETTE (for PLANTDYNAMICTOOLPALETTE)
- Autodesk Help: DIMLFAC (System Variable) (for DIMLFAC)
- Autodesk Help: CADmep Commands List (for CADmep)
- Autodesk Help: PLANTINSULATIONUSEPARTLAYER (for PLANTINSULATIONUSEPARTLAYER)
- Autodesk Help: PLANTINSULATIONCOLOR (for PLANTINSULATIONCOLOR)
- Autodesk Help: PLANTINSULATIONTRANSPARENCY (for PLANTINSULATIONTRANSPARENCY)
- Autodesk Help: Commands for Object Properties (for CELWEIGHT)
- Autodesk Help: ATTSYNC (Command) (for ATTSYNC)
- Autodesk Help: PICKADD (System Variable) (for PICKADD)
- Autodesk Help: TABLEEXPORT (Command) (for TABELLENEXPORT)
- Wikipedia: Office Open XML (for XLSX)
- Autodesk Help: FILLMODE (System Variable) (for FILLMODE)
- Autodesk Help: REGENALL (Command) (for REGENALL)
- Autodesk Help: PEDIT (Command) (for PEDIT)
- Autodesk Help: THUMBSAVE (System Variable) (for THUMBSAVE)
- Autodesk Help: RASTERPREVIEW (System Variable) (for RASTERPREVIEW)
- Autodesk Help: QTEXTMODE (System Variable) (for QTEXTMODE)
- ISO 216:2007 (for ISO A4)
- Autodesk Help: Load/Unload Applications Dialog Box (for APPLOAD)
- Autodesk Help: CUI (Command) (for ABI, CUIX)
- Autodesk Help: COORDINATIONMODELATTACH (Command) (for COORDINATIONMODELATTACH)
- Autodesk Help: CMOSNAP (System Variable) (for CMOSNAP)
- Autodesk Help: CMFADEOPACITY (System Variable) (for CMFADEOPACITY)
- Autodesk Help: CMFADECOLOR (System Variable) (for CMFADECOLOR)
- Autodesk Help: EXPORT (Command) (for EXPORT)
- Wikipedia: IGES (for IGES)
- Wikipedia: ACIS (for SAT)
- Autodesk Help: DIMREASSOCIATE (Command) (for BEMREASSOZ)
- Autodesk Help: ANNOMONITOR (System Variable) (for ANNOMONITOR)
- Autodesk Help: About Windows Utilities for License Server Management (for LMTOOLS)
- Wikipedia: Transmission Control Protocol (for TCP)
- Wikipedia: AutoCAD DXF (for DXF)
- Wikipedia: Work breakdown structure (for WBS)
- Wikipedia: MasterFormat (for CSI)
- Microsoft Learn: Custom date and time format strings (for dd.MM.yyyy HH:mm)
- Wikipedia: Solid-state drive (for SSD)
- FARO Technologies (for FARO, FLS, FWS, LSPROJ)
- Wikipedia: FBX (for FBX)
- Wikipedia: Ground control point (for GCP)
- Wikipedia: Text file (for TXT)
- Wikipedia: STL (file format) (for STL)
- Wikipedia: Dynamic Host Configuration Protocol (for DHCP)
- Wikipedia: Visual Basic for Applications (for VBA)
- Wikipedia: .exe (for EXE)
- Microsoft Learn: Visual C++ Redistributable (for VC10)
- Wikipedia: API (for API)
- Wikipedia: Visual Basic .NET (for VB.NET)