Plant Engineering Infobase · Chapter 05 of 16
Documentation
Plant documentation is part of project management, like quality management and project controlling. When well structured, it lowers the operator's operating and maintenance costs and creates follow-up business for the designer.
Structure and identification of documents
The documentation structure is derived from the plant structure according to DIN EN IEC 81346DIN EN IEC 81346 – Industrial systems – Structuring principles and reference designations The cross-industry basis of plant designation: each object under three aspects – function (=), product (-) and location (+). Part 2 contains the code letters, ISO/TS 81346-10 the version for power plants (RDS-PP). Background and sources ›. Recommended sequence at project start:
- Structure the plant (by function, product and location). At the start of design, usually only the function structure is available; the product structure is complete only once the design execution has been defined.
- Derive the documentation structure from it. Not every node needs its own documents; information on several objects can be assigned to a higher-level object.
- Define for which objects typicals (template documents) are used.
- Designate documents.
- Define the documentation scope for each object, with responsibilities.
Documents are classified according to IEC 61355-1:2008IEC 61355 – Classification and designation of documents for plants Classified documents using the document kind classification code DCC. Withdrawn at the end of 2024 and replaced by IEC 81355-1. Background and sources › (now IEC 81355-1:2024IEC 81355 – Classification and designation of information and documents Successor of IEC 61355: part 1 specifies how documents are classified by kind and linked to the reference designation of the object. Background and sources ›). At its core is the document kind classification code DCCDCC – Document kind Classification Code Document kind classification code according to DIN EN IEC 61355-1: abbreviation for the kind of document, e.g. flow diagram or parts list. Background and sources ›. The document designation is made up of the object's reference designation, the DCC and a sheet number, and appears in the title block (title block according to DIN EN ISO 7200DIN EN ISO 7200 – Technical product documentation – Data fields in title blocks and document headers Specifies the data fields of the title block, including seven mandatory fields such as identification number, title, creator and date of issue. Width 180 mm, position bottom right. Background and sources ›, document layout according to IEC 61082-1IEC 61082 – Preparation of documents used in electrotechnology Part 1 covers structure and presentation of electrotechnical documents such as circuit diagrams and lists. Background and sources ›).
Summary based on the publication series "Identification and Documentation" by the Interessengemeinschaft Energieversorgungsunternehmen (IG EVU), Part 1 (IEC 61346IEC 61346 – Industrial systems – Structuring principles and reference designations (old) Predecessor of IEC 81346, withdrawn. Older designation guidelines still refer to it. Background and sources ›) and Part 2 (IEC 61355)
Data sheets
Equipment, machine and valve data sheets record operating and design data: fluid, operating and design pressure and temperature, flow rates, material data, materials, nozzles with DN/PNDN – Nominal size (DN) Designation for the size of pipes, fittings and valves (Diameter Nominal). It is roughly the inside diameter in millimeters but is not an exact dimension. Background and sources ›PN – Nominal pressure rating Designation for the pressure rating of flanges and valves (Pressure Nominal), e.g. PN 16. It corresponds roughly to the allowable pressure in bar at room temperature; at higher temperatures, less is allowed. Background and sources › and facing, corrosion allowance, test pressure and code. They are the bridge between process engineering, procurement and the CADCAD – Computer-Aided Design Computer-aided design and drafting. Background and sources › model and should carry the same tags as the P&IDR&I – Piping and instrumentation diagram Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram). Background and sources ›.
Bills of materials
A bill of materials lists all parts and assemblies of a product with quantities. It is the basis for procurement, requirements planning, costing, production planning, warehousing, manufacturing and spare parts management. Each item carries at least an item number, quantity, description and part number, often also material, dimensions and weight. The reverse – which products a part is used in – is called a where-used list.
| Type of bill of materials | Characteristic | Strength |
|---|---|---|
| Summarized bill of materials | All parts with total quantity, without structure | Easy to create and evaluate |
| Multi-level bill of materials | Entire product structure across all production levels | Shows at a glance where a part is used |
| Modular bill of materials | Only one level; assemblies get their own bills of materials | Clear, good for reuse |
| Variant bill of materials | Several similar products in one document, distinguished by attributes | Less maintenance effort for product families |
| Engineering bill of materials | Created with the drawing, often directly on it | Everything essential on one sheet |
| Manufacturing bill of materials | Engineering bill of materials, extended with order and manufacturing data | Planning and accounting of production |
In plant engineering, the material list (piping material take-off, BOMBOM – Bill of Materials Bill of Materials – parts or material list. In AutoCAD Plant 3D the BOM-ATTRIBUTES section of Iso.atr defines the component properties on the isometric. Background and sources ›) from Plant 3D or the isometric corresponds to a summarized or engineering bill of materials per line.
Summary based on industrial-engineering-vision.de and Wikipedia: Bill of materials
Delivery times
Check delivery times of process components as soon as the order is received. Working backward from the commissioning date, the critical components can be identified from basic engineering; these are usually equipment, machines and special valves. Specify and order these items early.
Related offering
Further reading
Technical literature, course manuals and video courses on P&ID, Plant 3D, Report Creator and database management in the Download Center.
Looking for support in an ongoing project?

Before you go …
Don't miss any training dates, C³ invitations and news on AutoCAD Plant 3D and P&ID.
Our newsletter only arrives when there's something important – concise and with tips from practice.
Standards status for this page 6 standards · researched October 2026
| Standard | Contents | Current edition | Replaced / successor |
|---|---|---|---|
| DIN EN IEC 81346-1 | Structuring principles and reference designations – Part 1: Basic rules | DIN EN IEC 81346-1:2024-07 | replaces DIN EN 81346-1:2010-05 |
| DIN EN IEC 81346-2 | Structuring principles and reference designation – Part 2: Classification of objects and codes for classes | DIN EN IEC 81346-2:2020-10 | replaces DIN EN 81346-2:2010-05 |
| DIN EN ISO 7200 | Technical product documentation – Data fields in title blocks and document headers | DIN EN ISO 7200:2004-05 | replaces DIN 6771-1:1970-12DIN 6771 – Title blocks for drawings, plans and lists (old) Former standard for title blocks, withdrawn and replaced by DIN EN ISO 7200. Many company title blocks are still based on it. Background and sources › |
| IEC 61082-1 | Preparation of documents used in electrotechnology – Part 1: Rules | IEC 61082-1:2014 (Ed. 3.0) | replaces IEC 61082-1:2006 (Ed. 2.0) |
| EN 61346 / IEC 61346 | Structuring principles and reference designations | withdrawn | now: DIN EN IEC 81346-1:2024-07 and DIN EN IEC 81346-2:2020-10 |
| IEC 61355-1 | Classification and designation of documents for plants, systems and equipment | withdrawn | now: IEC 81355-1:2024 (IEC 61355-1 withdrawn on 6 December 2024) |
Researched at DIN Media, ISOISO – International Organization for Standardization International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards). Background and sources ›, IECIEC – International Electrotechnical Commission International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control. Background and sources › and ASMEASME – American Society of Mechanical Engineers US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide. Background and sources ›, as of October 2026. Before binding use, please check the current edition with the standards publisher. Overview of all standards: Plant Engineering Infobase · Standards status.
Technically responsible: A. Seitz, Managing Director of A. Seitz Ingenieur GmbH (plant design, AutoCAD Plant 3D).
Terms, background and sources 16 terms on this page
Brief explanations for reference. They do not replace the standard or code itself.
- DIN EN IEC 81346 – Industrial systems – Structuring principles and reference designations
The cross-industry basis of plant designation: each object under three aspects – function (=), product (-) and location (+). Part 2 contains the code letters, ISO/TS 81346-10 the version for power plants (RDS-PP).
- IEC 61355 – Classification and designation of documents for plants
Classified documents using the document kind classification code DCC. Withdrawn at the end of 2024 and replaced by IEC 81355-1.
- IEC 81355 – Classification and designation of information and documents
Successor of IEC 61355: part 1 specifies how documents are classified by kind and linked to the reference designation of the object.
- DCC – Document kind Classification Code
Document kind classification code according to DIN EN IEC 61355-1: abbreviation for the kind of document, e.g. flow diagram or parts list.
- DIN EN ISO 7200 – Technical product documentation – Data fields in title blocks and document headers
Specifies the data fields of the title block, including seven mandatory fields such as identification number, title, creator and date of issue. Width 180 mm, position bottom right.
- IEC 61082 – Preparation of documents used in electrotechnology
Part 1 covers structure and presentation of electrotechnical documents such as circuit diagrams and lists.
- IEC 61346 – Industrial systems – Structuring principles and reference designations (old)
Predecessor of IEC 81346, withdrawn. Older designation guidelines still refer to it.
- DN – Nominal size (DN)
Designation for the size of pipes, fittings and valves (Diameter Nominal). It is roughly the inside diameter in millimeters but is not an exact dimension.
Specified in DIN EN ISO 6708. Which outside diameter belongs to a DN is defined in the dimensional standards, e.g. DIN EN 10220 for steel pipes.
- PN – Nominal pressure rating
Designation for the pressure rating of flanges and valves (Pressure Nominal), e.g. PN 16. It corresponds roughly to the allowable pressure in bar at room temperature; at higher temperatures, less is allowed.
Specified in DIN EN 1333. The pressure-temperature ratings for each material are given in the component standards, e.g. DIN EN 1092-1 for steel flanges.
- CAD – Computer-Aided Design
Computer-aided design and drafting.
- R&I – Piping and instrumentation diagram
Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram).
Symbols and drawing rules: DIN EN ISO 10628-1 and -2. Identification letters for instrumentation: DIN EN 62424 or ISA-5.1.
- BOM – Bill of Materials
Bill of Materials – parts or material list. In AutoCAD Plant 3D the BOM-ATTRIBUTES section of Iso.atr defines the component properties on the isometric.
- DIN 6771 – Title blocks for drawings, plans and lists (old)
Former standard for title blocks, withdrawn and replaced by DIN EN ISO 7200. Many company title blocks are still based on it.
- ISO – International Organization for Standardization
International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards).
ISO was founded in 1947. Its members are the national standards bodies; for Germany, this is DIN.
- IEC – International Electrotechnical Commission
International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control.
IEC was founded in 1906. IEC standards adopted in Europe are called “EN IEC …” or “EN 6xxxx”.
- ASME – American Society of Mechanical Engineers
US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide.
ASME was founded in 1880. Well-known codes: B31.3 (process piping), B16.5 (flanges), B36.10M and B36.19M (pipe dimensions).
Sources and origins
- DIN Media: DIN EN IEC 81346-1:2024-07 (for DIN EN IEC 81346)
- IEC Webstore: IEC 61355-1 (for IEC 61355)
- IEC Webstore: IEC 81355-1 (for IEC 81355)
- IEC – International Electrotechnical Commission (for DCC, R&I, IEC)
- DIN Media: DIN EN ISO 7200:2004-05 (for DIN EN ISO 7200)
- IEC Webstore: IEC 61082-1 (for IEC 61082)
- IEC Webstore: IEC 61346-1:1996 (withdrawn) (for IEC 61346)
- ISO 6708 – Pipework components, definition and selection of DN (for DN)
- DIN – German Institute for Standardization (for DN, PN)
- CEN and CENELEC – European standardization (for PN)
- Wikipedia – Computer-aided design (for CAD)
- ISO – International Organization for Standardization (for R&I, ISO)
- Wikipedia: Bill of materials (for BOM)
- DIN Media: DIN 6771-1 (withdrawn) (for DIN 6771)
- ASME – American Society of Mechanical Engineers (for ASME)