Plant Engineering Infobase · Chapter 12 of 16
Project Setup in AutoCAD Plant 3D
The goal is a template project with usable layouts, a plant identification system (here KKSKKS – Power plant identification system Identification of plants, systems, equipment units and components in power plants according to guideline VGB-S-811-01. Background and sources ›) in the tag assignment, automatic annotation and symbols according to DINDIN – German Institute for Standardization German Institute for Standardization in Berlin: it publishes the German standards (DIN standards) and represents Germany in CEN and ISO. Background and sources › and ISOISO – International Organization for Standardization International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards). Background and sources ›. First collect all requirements, then work through them according to the schedule.
Overview
The most important point is consistent tag assignment in P&IDR&I – Piping and instrumentation diagram Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram). Background and sources › and Plant 3D: every piping spec assigned in the P&ID must exist in Plant 3D, and every P&ID symbol needs a matching component in the piping spec. Check views must be in place.
Related offering
Abbreviation
ASEING PlantConfig Pro delivers the setup described here – with KKS, AKSAKS – Plant identification system (AKS) Scheme by which an owner or operator gives every plant, component and room a unique name, often for building services. Each operator defines its own AKS. Background and sources ›, RDS-PPRDS-PP – Reference Designation System for Power Plants Identification system for power plants based on the international standard series ISO/IEC 81346; successor to KKS. Background and sources › or DIN EN ISO 10628DIN EN ISO 10628 – Diagrams for the chemical and petrochemical industry Part 1 specifies the kinds of flow diagrams (block, process, P&I diagram) and what each shows; part 2 the graphical symbols. Basis of the symbol library in AutoCAD P&ID. Background and sources ›, title block, annotation and check views – fully configured: as a company license from €2,490 net plus VAT (tiered by number of Plant 3D users), individual templates on request.
Project data
| Project name | Client_ProjectName_ProjectNumber |
| Drawing name | ProjectNumber_DrawingType_Number_ShortName |
| Project participants | Addresses and contacts for client, designer, architect, inspector, structural engineering |
| Title block | Always fill in quality information: created by, checked by, approved by |


Fields, tags and annotation
Field definitions and selection lists are the basis for tags, annotation and material takeoff. Standardize tag definitions across all classes and generate annotations exclusively from properties.



Comparing P&ID and Plant 3D
Tags and fields must have the same names in both environments and be linked via property mapping. Maintain the mapping list of P&ID objects to 3D objects. Create check views for tags and annotation in the Data Manager; reports show at a glance which symbols have already been placed in the 3D model.


Lines, symbols, catalogs
- Line definitions: distinguish lines by fluid using linetype and color. The scheme is a project standard; DIN 2403DIN 2403 – Identification of pipelines according to fluid conveyed DIN 2403 specifies how above-ground pipelines are marked according to the fluid they carry. Each fluid belongs to a group 0 to 9 with its own group colour; flammable and non-flammable gases, liquids and solids also carry an additional colour. “Gr.” with a number names the group, e.g. Gr. 1 = water, green. Background and sources › applies to color coding on the built plant.
- Symbol library: configure symbols so they can be linked to 3D objects; organize tool palettes logically (equipment, valves, lines, instruments).
- Material catalogs and piping specs: duplicate existing, working components instead of creating new ones. Catalogs can also be assembled via the clipboard.
- Bills of materials: align the content with the intended use (purchasing, fabrication, installation).
Related offering
Ready-made symbol library
The ASEING templates (PlantConfig Pro) provide organized tool palettes (equipment, valves, I&C, lines) with P&ID-to-3D mapping – as a company license from €2,490 net plus VAT (tiered by number of Plant 3D users), individual templates on request.

Documenting the configuration
Record every deviating configuration in the project configuration template. This includes:
- Installation notes: administrator rights, paths, virus scanner; connection to company-specific standards, central DWTDWT – Drawing template AutoCAD template file (drawing template): new drawings take their layers, styles and settings from it. Background and sources › templates and central piping specs.
- Project setup guide: create the project, adjust paths, check or import tool palettes, update project-specific fields immediately.
- Work instructions for users: valid symbols, annotations to use, mandatory information, checks before submission, data exchange.
Related offering
Learn to set it up yourself
Level 2 "Administrator" of our training program covers the project, symbol library, data and annotation in Plant 3D. Or get it ready-made: ASEING PlantConfig Pro and the ASEING PlantPlus command extension.
Setting up the project according to the rule set: The sequence rule set → properties → tag formats → symbols → piping specs → templates → checking is described in the standards compass, section 9.
Overall concept · Process engineering & flow diagrams, piping construction
Software and training for these trades
Which Autodesk software fits – and where you can learn it. Overview of all disciplines in the overall concept, all dates in the training calendar.
| Discipline | Software | Training dates |
|---|---|---|
| Process engineering & flow diagrams | AutoCAD with the Plant 3D and P&ID toolsets AutoCAD (incl. toolsets) | AutoCAD P&ID Fundamentals AutoCAD P&ID Setup |
| Piping construction | AutoCAD with the Plant 3D and P&ID toolsets Navisworks Inventor | AutoCAD Plant 3D Fundamentals Plant 3D Piping Spec Workshop Plant 3D Configuration & Data Management Inventor Compact: Tube and Pipe |
Problem still there?
For new companies the first 45 minutes are free of charge.

Before you go …
Don't miss any training dates, C³ invitations and news on AutoCAD Plant 3D and P&ID.
Our newsletter only arrives when there's something important – concise and with tips from practice.
Standards status for this page 3 standards · researched October 2026
| Standard | Contents | Current edition | Replaced / successor |
|---|---|---|---|
| DIN EN ISO 10628-1 | Diagrams for the chemical and petrochemical industry – Part 1: Specification of diagrams | DIN EN ISO 10628-1:2015-04 | replaces DIN EN ISO 10628:2001-03 |
| DIN EN ISO 10628-2 | Diagrams for the chemical and petrochemical industry – Part 2: Graphical symbols | DIN EN ISO 10628-2:2013-04 | replaces DIN EN ISO 10628:2001-03 |
| DIN 2403 | Identification of pipelines according to fluid conveyed | DIN 2403:2025-12 | replaces DIN 2403:2018-10 |
Researched at DIN Media, ISO, IECIEC – International Electrotechnical Commission International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control. Background and sources › and ASMEASME – American Society of Mechanical Engineers US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide. Background and sources ›, as of October 2026. Before binding use, please check the current edition with the standards publisher. Overview of all standards: Plant Engineering Infobase · Standards status.
Technically responsible: A. Seitz, Managing Director of A. Seitz Ingenieur GmbH (plant design, AutoCAD Plant 3D).
Terms, background and sources 11 terms on this page
Brief explanations for reference. They do not replace the standard or code itself.
- KKS – Power plant identification system
Identification of plants, systems, equipment units and components in power plants according to guideline VGB-S-811-01.
A KKS code is structured from coarse to fine: overall plant, system, equipment unit, component. Its successor is RDS-PP according to ISO/IEC 81346.
- DIN – German Institute for Standardization
German Institute for Standardization in Berlin: it publishes the German standards (DIN standards) and represents Germany in CEN and ISO.
DIN was founded in 1917 as the Standards Committee of German Industry. If “DIN EN” or “DIN EN ISO” precedes the number, a European or international standard has been adopted unchanged as a German standard.
- ISO – International Organization for Standardization
International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards).
ISO was founded in 1947. Its members are the national standards bodies; for Germany, this is DIN.
- R&I – Piping and instrumentation diagram
Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram).
Symbols and drawing rules: DIN EN ISO 10628-1 and -2. Identification letters for instrumentation: DIN EN 62424 or ISA-5.1.
- AKS – Plant identification system (AKS)
Scheme by which an owner or operator gives every plant, component and room a unique name, often for building services. Each operator defines its own AKS.
- RDS-PP – Reference Designation System for Power Plants
Identification system for power plants based on the international standard series ISO/IEC 81346; successor to KKS.
- DIN EN ISO 10628 – Diagrams for the chemical and petrochemical industry
Part 1 specifies the kinds of flow diagrams (block, process, P&I diagram) and what each shows; part 2 the graphical symbols. Basis of the symbol library in AutoCAD P&ID.
- DIN 2403 – Identification of pipelines according to fluid conveyed
DIN 2403 specifies how above-ground pipelines are marked according to the fluid they carry. Each fluid belongs to a group 0 to 9 with its own group colour; flammable and non-flammable gases, liquids and solids also carry an additional colour. “Gr.” with a number names the group, e.g. Gr. 1 = water, green.
Groups and colours: 1 water – green · 2 steam – red · 3 air – grey · 4 flammable gases – yellow, additional colour red · 5 non-flammable gases – yellow, additional colour black · 6 acids – orange · 7 alkalis – violet · 8 flammable liquids and solids – brown, additional colour red · 9 non-flammable liquids and solids – brown, additional colour black · 0 oxygen – blue (as reproduced in TRGS 201 Annex 3, Table 2).
In the Piping Spec Calculator the groups order the selection of fluids. “Exhaust air and flue gas” is listed under 3/5; food and pharma and “other” have no group. The group does not determine material or pressure rating – it applies to marking the finished line.
Current edition according to DIN Media: DIN 2403:2025-12 (replaces DIN 2403:2018-10). Not covered are pipelines on ships and marine installations, ventilation systems in non-residential buildings and medical gas pipelines.- DWT – Drawing template
AutoCAD template file (drawing template): new drawings take their layers, styles and settings from it.
- IEC – International Electrotechnical Commission
International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control.
IEC was founded in 1906. IEC standards adopted in Europe are called “EN IEC …” or “EN 6xxxx”.
- ASME – American Society of Mechanical Engineers
US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide.
ASME was founded in 1880. Well-known codes: B31.3 (process piping), B16.5 (flanges), B36.10M and B36.19M (pipe dimensions).
Sources and origins
- vgbe energy (formerly VGB PowerTech) (for KKS, RDS-PP)
- DIN – German Institute for Standardization (for DIN)
- ISO – International Organization for Standardization (for ISO, R&I)
- IEC – International Electrotechnical Commission (for R&I, RDS-PP, IEC)
- ASEING Plant Engineering Infobase (for AKS)
- DIN Media: DIN EN ISO 10628-1:2015-04 (for DIN EN ISO 10628)
- TRGS 201 Annex 3, Table 2: Marking of pipelines according to the fluids conveyed (BGN, in German) (for DIN 2403)
- DIN Media: DIN 2403:2025-12 (for DIN 2403)
- Autodesk Help (for DWT)
- ASME – American Society of Mechanical Engineers (for ASME)