Plant Engineering Infobase · Chapter 04 of 16
Process control engineering
Process control loops (formerly I&C loops) are shown in the P&IDR&I – Piping and instrumentation diagram Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram). Background and sources › according to DIN EN 62424:2017-12DIN EN 62424 – Representation of process control engineering requests in P&I diagrams Specifies how instrumentation points are represented in the P&ID and designated with code letters (e.g. TIC = temperature, indication, control). It replaces DIN 19227-1; VDE classification VDE 0810-24. Background and sources ›. It replaces the withdrawn DIN 19227-1DIN 19227 – Control technology – Graphical symbols and identifying letters for process control engineering Former German standard for instrumentation code letters, withdrawn. Replaced by DIN EN 62424 and DIN 28000-4; older P&IDs still show its notation. Background and sources ›. The USUS – United States United States of America. Background and sources › equivalent is ANSI/ISA-5.1-2024ANSI/ISA-5.1 – Instrumentation and Control – Symbols and Identification US counterpart to DIN EN 62424: symbols and code letters for instruments in flow diagrams (e.g. FIC, PT). AutoCAD P&ID has its own ISA symbol library for it; do not mix with DIN EN 62424. Background and sources ›.
Open-loop and closed-loop control
- Open-loop control
- Input variables influence a process variable whose actual value is not fed back. Disturbances are therefore neither detected nor compensated: open control loop.
- Closed-loop control
- The controlled variable x is measured continuously and compared with the reference variable w. From the control deviation e = w − x, a manipulated variable is formed that brings x into line with w: closed control loop. Cyclic digital sampling control also counts as continuous.
- Process
- The totality of interacting operations in which matter, energy or information is converted, transported or stored, e.g. power generation in a power plant or pig iron production in a blast furnace.
The terms are now defined in DIN IEC 60050-351DIN IEC 60050 – International Electrotechnical Vocabulary Part 351 defines the terms of control technology, e.g. the difference between open-loop control and closed-loop control. Background and sources › (International Electrotechnical Vocabulary, control technology), which replaces the former DIN 19226DIN 19226 – Control technology – Closed-loop and open-loop control engineering; terms Former terminology standard for control engineering, withdrawn. The terms are now in DIN IEC 60050-351. Background and sources ›. In English, control covers both; only closed-loop control for "Regelung" and open-loop control for "Steuerung" are unambiguous.
Summary based on Wikipedia: Control engineering
Structure of a PCE loop
The process control loop is shown as an oval. The letter codes are at the top, the loop number at the bottom. A horizontal line means operation and indication in the control room; without a line, it means local.
Identification letters according to DIN EN 62424
| Letter | First letter (PCE category) | Succeeding letter (processing function) |
|---|---|---|
| A | Analysis | Alarm, message |
| B | Optical measurement (e.g. flame monitoring) | Limitation |
| C | – | Closed-loop control |
| D | Density | Difference |
| E | Voltage | – |
| F | Flow | Ratio |
| G | Distance, length, position | – |
| H | Manual input, manual intervention | Upper limit, on, open |
| I | Electric current | Analog indication |
| J | Electrical power | – |
| K | Time-based function | Rate of change over time |
| L | Level | Lower limit, off, closed |
| M | Moisture | – |
| N | Electrical actuation (motor, heating) | – |
| O | – | Status indication of binary signals (local or DCS) |
| P | Pressure | Test point connection |
| Q | Quantity, count, material properties, quality | Integral, quantity or total |
| R | Radiation variables | Recording |
| S | Speed, frequency, rotational speed | Binary control or switching function (not safety-related) |
| T | Temperature | – |
| U | – | – |
| V | Vibration, mechanical analysis, torque | – |
| W | Weight, mass, force | – |
| X | free for meanings not listed | free for meanings not listed |
| Y | Hydraulic or pneumatic actuation | Computing function |
| Z | – | Binary control or switching function (safety-related) |
Differences from the old DIN 19227-1: There, V stood for viscosity, W for weight force/mass and E for electrical variables in general; A (analysis) and I (current) were not assigned as first letters, and Z meant "emergency intervention, protective device". Loops were drawn as circles instead of ovals. Therefore, do not adopt as-built documentation according to DIN 19227 without checking it.
Overall concept · I&C / process control engineering
Software and training for this discipline
Which Autodesk software fits – and where you can learn it. Overview of all disciplines in the overall concept, all dates in the training calendar.
Software
Training dates
Setting up a new project?

Before you go …
Don't miss any training dates, C³ invitations and news on AutoCAD Plant 3D and P&ID.
Our newsletter only arrives when there's something important – concise and with tips from practice.
Standards status for this page 4 standards · researched October 2026
| Standard | Contents | Current edition | Replaced / successor |
|---|---|---|---|
| DIN EN 62424 (VDE 0810-24VDE 0810 – VDE classification of process control standards Number under which a standard also applies as a VDE regulation: VDE 0810-24 is DIN EN 62424 (instrumentation in the flow diagram), VDE 0810-1 is DIN EN 61511-1 (functional safety). Background and sources ›) | Representation of process control engineering requests in P&I diagrams and data exchange between P&ID tools | DIN EN 62424 (VDE 0810-24):2017-12 | replaces DIN EN 62424 (VDE 0810-24):2010-01 |
| DIN IEC 60050-351 | International Electrotechnical Vocabulary – Part 351: Control technology | DIN IEC 60050-351:2014-09 | replaces DIN IEC 60050-351:2009-06 |
| DIN 19226 | Control technology – Closed-loop and open-loop control engineering; terms | withdrawn | now: DIN IEC 60050-351 (replacement 2009-06; current 2014-09) |
| DIN 19227-1 | Control technology – Graphical symbols and identifying letters for process control engineering | withdrawn | now: DIN 28000-4:2014-07DIN 28000 – Chemical apparatus – Documentation in the life cycle of process plants Part 4 contains the graphical symbols for valves, pipelines and actuators in the flow diagram. It replaces DIN 2429 and complements DIN EN ISO 10628-2. Background and sources › and DIN EN 62424 (VDE 0810-24), currently 2017-12 |
Researched at DIN Media, ISOISO – International Organization for Standardization International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards). Background and sources ›, IECIEC – International Electrotechnical Commission International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control. Background and sources › and ASMEASME – American Society of Mechanical Engineers US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide. Background and sources ›, as of October 2026. Before binding use, please check the current edition with the standards publisher. Overview of all standards: Plant Engineering Infobase · Standards status.
Technically responsible: A. Seitz, Managing Director of A. Seitz Ingenieur GmbH (plant design, AutoCAD Plant 3D).
Terms, background and sources 12 terms on this page
Brief explanations for reference. They do not replace the standard or code itself.
- R&I – Piping and instrumentation diagram
Flow diagram showing all pipes, valves, equipment and instrumentation of a plant (P&ID, Piping and Instrumentation Diagram).
Symbols and drawing rules: DIN EN ISO 10628-1 and -2. Identification letters for instrumentation: DIN EN 62424 or ISA-5.1.
- DIN EN 62424 – Representation of process control engineering requests in P&I diagrams
Specifies how instrumentation points are represented in the P&ID and designated with code letters (e.g. TIC = temperature, indication, control). It replaces DIN 19227-1; VDE classification VDE 0810-24.
- DIN 19227 – Control technology – Graphical symbols and identifying letters for process control engineering
Former German standard for instrumentation code letters, withdrawn. Replaced by DIN EN 62424 and DIN 28000-4; older P&IDs still show its notation.
- US – United States
United States of America.
- ANSI/ISA-5.1 – Instrumentation and Control – Symbols and Identification
US counterpart to DIN EN 62424: symbols and code letters for instruments in flow diagrams (e.g. FIC, PT). AutoCAD P&ID has its own ISA symbol library for it; do not mix with DIN EN 62424.
Formerly ISA S5.1; current edition ANSI/ISA-5.1-2024.
- DIN IEC 60050 – International Electrotechnical Vocabulary
Part 351 defines the terms of control technology, e.g. the difference between open-loop control and closed-loop control.
- DIN 19226 – Control technology – Closed-loop and open-loop control engineering; terms
Former terminology standard for control engineering, withdrawn. The terms are now in DIN IEC 60050-351.
- VDE 0810 – VDE classification of process control standards
Number under which a standard also applies as a VDE regulation: VDE 0810-24 is DIN EN 62424 (instrumentation in the flow diagram), VDE 0810-1 is DIN EN 61511-1 (functional safety).
- DIN 28000 – Chemical apparatus – Documentation in the life cycle of process plants
Part 4 contains the graphical symbols for valves, pipelines and actuators in the flow diagram. It replaces DIN 2429 and complements DIN EN ISO 10628-2.
- ISO – International Organization for Standardization
International Organization for Standardization in Geneva: it develops standards that apply worldwide (ISO standards).
ISO was founded in 1947. Its members are the national standards bodies; for Germany, this is DIN.
- IEC – International Electrotechnical Commission
International Electrotechnical Commission in Geneva: worldwide standards for electrical engineering and for instrumentation and control.
IEC was founded in 1906. IEC standards adopted in Europe are called “EN IEC …” or “EN 6xxxx”.
- ASME – American Society of Mechanical Engineers
US engineering society. Its codes for piping, flanges and pipe dimensions apply in many plants worldwide.
ASME was founded in 1880. Well-known codes: B31.3 (process piping), B16.5 (flanges), B36.10M and B36.19M (pipe dimensions).
Sources and origins
- ISO – International Organization for Standardization (for R&I, ISO)
- IEC – International Electrotechnical Commission (for R&I, IEC)
- DIN Media: DIN EN 62424:2017-12 (for DIN EN 62424)
- DIN Media: DIN 19227-1 (withdrawn) (for DIN 19227)
- Wikipedia: United States (for US)
- ANSI Webstore: ANSI/ISA-5.1-2024 (for ANSI/ISA-5.1)
- DIN Media: DIN IEC 60050-351:2014-09 (for DIN IEC 60050)
- DIN Media: DIN 19226-1 (withdrawn) (for DIN 19226)
- DIN Media: DIN EN 62424 (VDE 0810-24) (for VDE 0810)
- DIN Media: DIN 28000-4:2014-07 (for DIN 28000)
- ASME – American Society of Mechanical Engineers (for ASME)